Woodworking Machinery Machinery For Sale In Valencian Community

Moulds press with high frequency generator Available also the moulds for sale From a public buildings equipment factory closed With emergency stop, mechanically and electrically overhauled

Semipress dryer 5 Sections Working width 4000mm Inox wire mesh belt in good condition

Composed by: 1 Two blades + double side gluing machine Monguzzi PULCHRA 45/3800 Year 2009 Equipped with screen, and video camera at machine rear side. Allow the Operator to see the rear side of the machine to can control the cutting and gluing process...

CPL/PVC/PAPER Working width 1.400mm Laminate with sheet or roll Year 2011 EC standards Good condition Composed by: - In feeding conveyor roller - Brush table - Top side glue spreader machine for Hotmelt (PUR/EVA/POLIOLEFINA) - Sandwich preparation table...

Working length 1800mm Working thickness 1 up to 3,5mm Maximum working diameter 750mm (Automatic feeding) or 850mm (Manual feeding) End log diameter once peeled 95mm Totally overhauled 3 months guarantee

Maximum log dimensions 800x800x4,000mm Maximum log weight 3,000Kg. Maximum working length 4,200mm Knife length 4,450mm Working thickness: 0.2mm (min) – 3.2mm (max) Cuts/strokes per minute 15 (min) – 90 (max)

SCARFING SAW Maximum length of veneer sheet 2700mm Minimum length of veneer sheet 1100mm Veneer thickness range 1,2mm up to 3,5mm Working speed 0,75m/sec JOINTING PRESS Maximum width of veneer 1650mm Minimum width of veneer 1100mm Pressing time 3-8 seconds

Roller conveyor Board in feeding device to preparation table Preparation table (The melamine paper is placed and the board is placed by driven troley) Press in feeding trolley MARZOLA Short cycle lamination hot press -Platens measures 2600x1400mm (For...

Composed by: - 2 pcs. CREMONA cross cut clipper machine - Tables for veneer bundles handling CREMONA 5200mm cutting length clipper machine.

Composed by: 1700mm peeling lathe equipped with debarker system Veneer conveyor belt Rotary guillotine Stacker

Composed of: - Driven conveyor roller for in feeding and board alignment - Longitudinal trimming unit - Board 90º turn device - Transversal trimming unit Veneered board trimming complete line, for veneered board overveneer remove, only the veneer not...

Working width 4.000mm 4 Drying sections 1 Cooling section Z screen path High performance Dismantled by experimented technicians, stocked in good conditions and protected.

Equipped with conveyor system Maximum flitch height 240mm Maximum flitch width 250mm Veneer thickness range 0.3 up to 8mm

Composed by: 20Tn Bridge crane for trunks pick up from the pond, equipped with 12Tn Hoist + Debarker machine + PRIVASA peeling lathe 2700x1800mm Working thickness 0.4mm up to 6mm Modified hydraulic spindle pressure system Driver for DC Clutch unit fully...

Knife length 1300mm Operated by pedal Overhauled Knife sharpened

LINE COMPOSITION - Pos. 7 Automatic feeding system for both splicing machines with veneer packs accumulator, with motorized conveyor roller with 90º turn, 4 meters and 2 floors veneer packs accumulator motorized conveyor roller, motorized conveyor rollers...

Composed by: -PEELING LATHE 1600MM Working length 1600mm Working diameter 800mm Final log diameter once processed 70mm Working thickness from 0,5mm to 5mm Double telescopic spindle - OUTFEED CONVEYOR BELT - WINDING SYSTEM FOR THIN VENEER THICKNESS PRODUCTION...

- Unloading and stacking conveyor belt. Composed by: - In feeding conveyor belt measures 4,200x2,400mm - Hydraulic continuous hot press, platens measures 3,400x2,150 x 80mm, 12 cylinders 140mm diameter each.

0.5 ~ 5 mm Veneer Strip Length：min. Veneer Strip Thickness (depending on veneer condition)：approx. 45 mm Production Speed：approx. 350 mm Veneer Strip Width：min. (depending on veneer strip thickness) Equipped with GLUIING UNIT and COOLING UNIT...

Working width 4000mm 2 Floors 4 Drying sections 1 Cooling section

Upper board sanding machine 3 Heads Working width 1300mm New conveyor dragging EC standards

1 TOCCHIO electronic rotary guillotine of 2100 mm. Width Year 2006 Electric cabinet and control desk. 1 lifting table with pit for collection of cut folios.

Regulating Electro-magnetic cylinders on the beam controlled by CNC. 1 Brush unit Type of brush: Anderlon Dia.: 150 mm Power: 4 kW Feeding motor power: 13 Kw Included 100 memories HEESEMAN Type KSA 8: 3 wide belt top calibrating and sanding machine1st)...

Thermojet - Novapress 6 Drying and ironing sections 1 Cooling and ironing section Working width 4200mm Screen drive system (Belt dragging without sprockets) Construction year 2002 Documentation EC standards

FSA Working width 650mm 4 Heads (2 Roller + 2 Pad) Cleaning brush at the output Heat exchanger cooling fluid Total installed power 70KW 400V – 50Hz EC standards Good condition

Maximum log diameter 1800mm Good condition, indoor located and still mounted Suitable for tropical logs

HARDO TH 300 PU ROLLER COATING MACHINE Roller application system for PUR adhesive Air dryer for the supply of dehydrated to PUR coating Automatic adhesive level control system Working speed 10,7mts/min Working width 300mm ROBATECH PU-MELT PREMELTER 2Kg...