Woodworking Machinery Machinery For Sale In Shreveport

TECHNO WALL is a CNC controlled patented working centre able to process wall panels with following standard dimension: width from 3000 up to 8000mm, thickness up to 400mm and, thanks to the use of the modular structure, an unlimited length Technical Data...

Motor: 1/4 Hp, 1720 RPM, 60Hz, TEFC Column: steel Supports: cast iron Housing: cast aluminum Wheels (3): 1-1/8" x 3-1/8", synthetic rubber Spring tension rollers Universal positioning with locking handles

Presto Model 4W36-40 Wide Base Scissors Lift Table Table Size 48" X 48" Equipped with Rotary Top also 48" X 48" (This is removable) Load Capacity: 4,000 pounds End/Side Capacity: 3,500 pounds Raised Height: 43" and 7-3/4" lowered height Standard Base...

WEINIG - UNIMAT 23E/005, ...Moulder (Feed Through) - 6-Head (B-R-L-T-T-B), working capacity 9-1/16" x 6" profiling. Grooved machine bed between first and last spindles for small part machining., short stock feed attachment between 1st and 2nd spindles.

2-3/4" x 2-3/4", part thickness from 1/8" to 1-1/2", max. 2nd Station : High speed shaper with " 0° to 55° tilt LA-011132 VOORWOOD L 177 B Shaper-Sander-Foiler : 5-Station Machine with infeed table feeding from right-to-left.

CATALOG NUMBER 5111 TECHNICAL DATA - max disc diameter 350mm - adjustable disc top / bottom and angled - 30mm spindle diameter - shield for cutting - max cutting height 110mm - max cutting width at the guide 610mm - worktop dimensions 1020x900mm - with...

Null - Translated with google

SCM Model T110A Shaper Main Motor: 6.4 HP, 230/460v, 3ph Spindle Size: 1-1/4" Diameter x 6" Under the Nut Spindle Speeds: 3000, 4500, 6000, 8000, 1 RPM Table Size: 25-1/2" x 39-1/2" Fence w/ Dust Hood Manual Hand-Crank for Spindle Height Adjustment...

Length of stock - 20"; throat clearance from extreme outboard saw - 22"; (6) overhead pressure rollers, height adjustable via motor; manually operated hydraulic arbor lift. Complete with: oil mist lubrication of bearings, automatic feed chain lubrication...

The raw material served on the drum is divided into two fractions: non-magnetic and magnetic, i.e. pure raw material and ferromagnetic waste. We issue a VAT invoice. They are adapted to work in continuous motion.

KOMO VR 512 MACH III with ATC and Boring only 3,622 hours; 60" x 144" Moving table , Heavy Duty fixed bridge machine, front-to-back configuration, 2" thick solid cast aluminum "Matrix" table machined with a single vacuum zone, (4) pop-up pins for material...

Workpiece height 120mm - number of spindles 4 1) horizontal lower 180mm 4kW 2) vertical right 120mm 4kW 3) vertical left 120mm 4kW 4) upper horizontal 180mm 5,5kW - all spindles adjustable up / down, right / left - 40mm spindle diameter from above: -...

Curvature radius mm.200 abrasive belts dim. To process10÷100 mm. 1 plane placed in front and 1 rear the machine. 1 rotating disk with two opposing abrasive belts driven by electric motor, with a revolution movement around the work piece.

LAGUNA SMART SHOP II 510 CNC Router with Tool Changer: 60" x 120" Moving gantry, fixed table design in a front-to-back configuration with a 6-zone vacuum table, T-slot table including manual controls.

Portable Cold Material Feed Bin System manufactured by STANDARD STEEL with the following Components and Features: (4) 8' x 12' material Feed Bins. Each Bin fitted with a Grizzly. Electric Gates.

- machine in stock - after a technical review - very good condition - for smoking chips TECHNICAL PARAMETERS: - 270 mm inlet width - 100 mm inlet height - 22 kW main engine - 1.5 kW and 2.2 kW feed motors - two knives - 300 mm rotor diameter - 320 mm...

Hot press Cremona measure of plan 1300 x 4300 mm 34 tonn, 7 kg/cm2 Thrust downwards from 8 pistons O160 200 mm stroke Heating hot water plans