Woodworking Machinery Machinery For Sale In Pennsylvania

Width Capacity: 40" Feed Table Length: 14' Fence Length: 188" 3 HP Lateral Chain Motor Top Hold-Down Roller Powered Pinch Roller Feeds Material into the Saw Steel Feed Rolls

MACHINE IS CURRENTLY DISMANTLED AND STORED IN OUR FACILITY FOR INSPECTION Configuration: Groove Unit, Tongue Unit Groove Unit: 5 HP Trim saw, 5 HP Trim Saw, Jump Shaper, 5 HP Horizontal Groove Saw Tongue Unit: 5 HP Trim Saw, 5 HP Trim Saw, Two 5 HP Tongue...

Automatically Routes a Left-Hand and a Right-Hand Stringer Simultaneously Maximum Material Capacity: 2" Thick x 12" Wide x Unlimited Length Two 2 HP, 3ph Router Motors Pneumatic & Hydraulic Movements Automatic Advancement

Automatically Routs a Left-Hand and Right-Hand Stringer Simultaneously Two Router Motors: 2 HP, 230/460v, 3ph Machines Stringers up to 2" Thick x 11-1/2" Wide Unlimited Part Length Pneumatic/Hydraulic Material Advancement Two Pneumatic Hold-Downs Serial...

Peerless #4 Production Machine Company, Greenfield Mass Motor: 5-horsepower, 220/440-volt, 3-phase, 50Hz, 960-rpm Amps: 14.6-amps @ 220-volt, 7.3-amps @ 440-volt rated Platen size: 15-5/8" wide, 35-3/4" long Belt size: 14" wide, 133" long Table size:...

Max opening between jaws (front/back) 32" Max opening between jaws (side/side) 26" Max opening between clamping jaws on side clamp assembly 24" (2) horizontal adjustable swivel side clamps Pneumatic clamping cylinders with 5" stroke (1) horizontal adjustable...

Self-Contained Tilting Band Saw Blade Motor: 15 HP, 230/460v, 3ph Table Size: 45" x 67" Special table design providing raising and lowering adjustable to 4" below the centerline of tilt Throat Capacity: 29" Clearance Under the Guide (Vertical): 24" Clearance...

Omal Insert 1300 L1 Bore Glue & Dowel Insertion Machine Controlled X-axis working area of 1300 mm (51") that can be divided into 4 working areas One 3/4 HP Horizontal Drilling Unit One Glue Injection Unit One Dowel Insertion Unit Foot Pedal Actuation...

114" x 60" capacity Complete Air Driven System (3) Vertical clamps (2) Horizontal clamps Manually adjustable Serial- 2004021684

Automatically Routes a Left-Hand and a Right-Hand Stringer Simultaneously Maximum Material Capacity: 2" Thick x 12" Wide x Unlimited Length Two 2 HP, 3ph Router Motors Pneumatic & Hydraulic Movements Automatic Advancement

Pneumafil Model 13.5-448-10 Dust Collector Capacity: 5767 sq/ft media, 57,000 CFM @ 10:1 air :cloth ratio 448 Bags 4" Diameter x 10' Long Carolina Blower Model 80-6-SD, 100 HP (Approximately 30,000 CFM with this Blower) Rotary Air Lock 2HP; 3PH Serial...

Material Width Capacity: 40" Material Thickness: 1/8" - 8" Cutterhead Motor: 40 HP, 3PH, 208-230/460 Volt Newman Quietcut Helical Carbide Cutterhead Feed Motor: 3 HP, 3PH, 230/460 Volt Variable Speed Feed from 30 - 90 FPM Sectional Chipbreaker Powered...

Main Motor: 1 HP, 115v, 1ph Lowered Height w/ Swivel Top: 10", Without: 7 1/4" Travel Distance: 36" Foot Pedal Operation Serial #: 97247-04 Table Size: 48" x 48" with Swivel Top Base Table Size: 24" x 48" Capacity: 3,500 lbs.

3/8" Four-Flute Bit Made in the U.S.A. Un-Used

Number of Spindles 8 Eight(8) Drilling Motors: 1.5 HP, 575v, 3ph Eight Pneumatic Hold-Downs Table Size: 12" x 96" Manual or Automatic Operation Cycle Timer Spindles Move into Workpiece via Hydraulic System 3 HP Hydraulic Pump Motor Spindle Stroke is 6"...

Moulding Thickness: 6-1/4" Machines Controls: manually controlled with hand lever and foot pedal Nose Knife Capacity: 1/2" to 1" width Extension Tables: cast iron, machined surface, 30-3/4" long Fence Rails: anodized aluminum, 59-1/2" total length, one...

Motor 15HP; 3PH; 230/460 volt Capacity 6,000 CFM 8 - filter bags empty into 8 plastic bags Inlet Diameter 13" Height: 10'-9" Fan size 23"

Double-Sided, Oscillating Edge Sander Main Motor: 7-1/2 HP, 230/460v, 3ph Platen Size: 9" x 49" Main Tables: 8" x 48" End Table: 20" x 13" Tables Tilt Manual Height Adjustment of Tables Sanding Belt Size: 6" x 145" Sanding Belt Speed: 3,900 FPM Drive...

Pistorius Model SC-12P Single Cut-off Saw Saw Blade Capacity 12" Arbor Size 5/8" Motor 5HP' 3PH Cutting Capacity 2.5" High X 6" Wide Table Height from Floor 36" Cut Actuation by Pneumatic Cylinder, Foot Pedal Controlled Serial no.

38992 New in 2007 Striebig Compact 4164 Vertical Panel Saw Cuts up to 5' x 10' Panels Cut Capacities 10'2" W x 5'4" H x 2-3/8" Thick Saw Motor 5-1/4 HP; 3PH Main Saw Blade 250 mm (9-7/8") with 30 mm Bore Cutting Stations 40 Inches on Center Built in Small...

Grinding Wheel Diameter: 6" - 8-7/8" Includes 2-1/8" Diameter Arbor 12" Tool Width Grinding Wheel Width: 13/64" - 3/8" Grinding Wheel Bore: 2-23/64" Tool Diameter: 4" - 11-3/4" Tool Width: 9-1/2" Grinding Wheel Motor: 1.5 HP Grindig Wheel Speed: 0 - 3,000...

Opening Capacity: 96" First Station: Top & Bottom Tilting Trim Saws 9.6HP, each Second Station: Jump Copes, Non Tilting 10 HP, 230/460v, 3ph, 7,000 RPM Third Station: Open Variable Speed Feed Feed Motor: 4 HP Motorized Open/Close Rubber-Padded Feed Chain...

Reconditioned! Two Baldor 1 HP, 115/230v, 1ph Motors each Driving a Double-Spindle Drilling Head Threaded Chucks Spindles on Heads are Spaced at 1" on Centers Heads are Independently Adjustable Horizontally Two Pneumatic Hold-Downs Table Size: 10" x 24"...

Arbor Size: 1-1/4" x 12" Main Motor: 7.5 HP, 550v, 3ph Two Pneumatic Hold-Downs Main Table: 10" x 22" 10" Diameter Maximum Cutter Capacity Cutting Stroke: 4-3/4" to 9-1/2" Pneumatic Stroke Foot-Pedal Operation Fence Serial #: 3322