Woodworking Machinery Machinery For Sale In Corona

DONALDSON TORIT DWS 4-3 Cartridge Dust Collector Downflo Workstations (DWS) are designed specifically for those in-plant areas where dirty and/or noisy operations are out in the open—grinding, sanding, chipping, batch mixing or welding.

CUTTERS RESTORED TO NEW Z: 6 O Hole: 40 Height (s) 22

- 3 independent zones of ultraviolet lamps. DRYING "V" BARBERAN TL-20 LOW PRESSURE OF OCASSION TECHNICAL CHARACTERISTICS: - Structure of steel folded and welded. - TOTAL LENGTH OF 2,500 MM - Motorized conveyor rollers with speed variator.

Hydraulic drill 2 Heads EP: 1m20 - Translated with google

The method of embedding the support knife (extending from the chipper’s body) allows very quick rotation or replacement (the knife is sharpened on four cutting edges). Feeding material is conveyed to the inlet using seven toothed feed rollers, driven...

To size single or multiple panels. Material: Chipboard or MDF laminated with melamine or plastic materials. Features: Flat-triple chip tooth with positive cutting angle. Advanced technology implementation to deliver a superior performance in the panel...

Minimum length of the wood: 1000mm Entrance with notched chain Output with notched rollers 3 Notched pressers Division enslaved. - FLOOR DELICATOR AND AUTOMATIC INPUT TABLE Mark: E.GILLET AUTOMATIC INPUT TABLE (Centered wood) 1 Double toothed chain rail...

Wide belt sander SCM model SANDYA 30 RRT130, with: -1° belt with calibrating roller -2° belt with sanding roller -3° belt with electronic sectioned pad -scotch-brite roller at the exit -inverter on the 2° and 3° belt -air blowers on the 2° and 3°...

Working width 51 0 mm (20-1/16") , working height 310 mm (12-3/16"). REX HOMS-510-K ... Top brand machine, cleaned, checked & tested by major German machinery specialists. 2-Sided Planer, with (2) Planer Heads and (1) Sawing Unit.

- year of construction: 1974 - equipped with pressure guides - clockwise rotation - blade tension: electric (with Belleville washers) Disassembled material, ready to load. - Replaced bearings - Possibility of dual-cutting - Motor driven 75 kW 6 belts...

- feed speed 2 or 3 m / min. - machine in stock - after a technical review - very good condition - year of production 2010 TECHNICAL PARAMETERS: - grinding width 940 mm - grinding height 150 mm - min.

CATALOG NUMBER 5085 TECHNICAL DATA - track width 300mm - shaft width 340mm - max disc diameter 350mm - disc hole diameter 70mm - max cutting height 120mm - top width with widening 760mm - top length 1430mm from above: - 1 row of pawls - sliding roller...

- machine in stock - after a technical review - very good condition Technical parameters: - eight spindles - two-sided - four pneumatic vertical clamps - two pneumatic horizontal clamps - adjustable spindle spacing - extreme spindles regulated under the...

120 Watt CO2 Laser Engraver Bed Size 32" x 20" Provided with Computer and Software Network Capable with Ethernet Port Capable of cutting through 1/4" Wood (Per Epilog Technician)

- Machine in stock - After the technical review - Very good condition TECHNICAL PARAMETERS: - Wisconsin engine - 37 HP engine power - Throat with dimensions 400 mm x 200 mm - Two pulling shafts - The size of wood chips ~ 10 mm - Hydraulic drive of pulling...