Woodworking Machinery Equipment For Sale In Germany

Automatic screw compressor with integrated compressed air refrigerant dryer including filter. Delivery quantity: 30.36 m³ / min - Translated with google

You alone decide which control you want to work with and how comfortable it is to work on your sliding table saw. The most important message: You have three controls at your disposal, and with each (!) You can move up to four axes and also swing the saw...

The new F 45 EvoDrive has a 7 "touch screen with a separate keyboard for entering numerical measurements, which allows control of up to 4 axes, as well as double-sided pivoting of the saw blade.Already integrated: the application technology.The green...

- 2250 mm cutting width - 80 mm cutting height - 2 x 3.7 KW saw engines - Translated with google

The HDS plus factors of CROSSCUT + Improved performance under cross-forces + Improved true-running precision + Quick and easy tooth carrier unriveting + Maximum noise reduction + HDS-Regeneration

350 mm max cutting height 65-250 mm min / max cutting width 1800-6000 mm cutting length 4 saw cuts at the same time 5-30 m / min variable feed speed 3 KW feed gearmotor 2x 30 + 2x22 KW Saegemotore feeder table with turning device Automatic 6 times width...

And you will benefit long term, since we only use tempered steels or high-strength aluminium for our distance rings. Only combining perfectly coordinated circular saws blades and distance rings will yield optimal efficiency.

- 150 mm cutting height - 500 mm Schnittlaenge- 4.4 KW Saegemotor- hydraulic Saegehub - Translated with google

- 3 Floordryer - the feeding side is with vaccum - the Outlet is not istalled, but availble - 185 C Hotwater - 15 bar pressure - width: 6m - length: 14m only dryer - max. Veener width: 5m - Capacity: 5000-6000m³ at 1.7mm in a year

THE SAWMILL TOOL COMPANY Our BASIC already defines the HDS quality Standard BASIC is the result of decades of experience which continuously impacted the development process of the technologies used.

Benefit from our "SoWa Sawmill Optimised Tool Design" for your saw line. BASIC Circular Saw Blades HDS . Now, mature and proven designs are available to ensure maximum performance Sawmill Optimised Tool Design (SoWa) with boutstanding stability.

THE SAWMILL TOOL COMPANY First class chipping with CANTERCUT Our CANTERCUT chipper canters feature up to 8 stages depending on the width to be chipped, with the number of knives per stage varying by feed rate, speed and the desired wood chip length.

The extra in ease of use and ergonomics: The Altendorf WA 80 X is easy to operate thanks to the swiveling operating panel at eye level and the CNC rip fence. Angles and mitres can be easily done with the angle miter fence in one function.

- 260 mm cutting height- 750 mm passage width- 5-30 m / min continuous feed- 2x55 KW Saegemotore- 3 KW feed motor- 70 mm Saegewellendurchmesser- 400 mm saw blade diameter - 5000 Kg weight - Translated with google

This Wimmer saw was delivered in 1996 for the first time. All other versions have been constructed based on this machine. Our all-round saw, ideal for almost all purposes. Thus there are many years of experience behind it.

With a roll diameter of 1000 mm and a saw blade 130 mm in width, this saw is ideally suited for high performance in the area of heavy wood logs. The cutting depth (space above saw blade) of 53 cm leaves nothing to be desired.

THE SAWMILL TOOL COMPANY A sharp matter for precise results The same quality parameters as for our tried and tested circular saw blades also apply to segments and sizing rings. Your segments and sizing rings therefore precisely match the application in...

Of course you can use the F 45 ElmoDrive to move all axes by electric motor and swivel the saw unit on both sides. Attached at eye level, it combines maximum ease of use and clarity with practical and ergonomic application.

We sell a tongue and groove machine for chipboard, fiberboard and OSB production. Technically in good condition. If you are interested please contact us. The system is fully functional.

Machine for cutting chipboard, fiberboard and OSB boards. The plant is functional and in good condition. If you are interested please contact us.

- 260 mm cutting height - 750 mm max. Cutting width - 5-30 m / min variable feed - 2 x 75 KW Saegemotore - 3 KW feed gearing - 70 mm Saegewellendurchmesser - 400 mm blade diameter - Translated with google

Easy assembly, stability, and reliability were the guidelines for developing this saw This saw has been specially designed for saw mills, whose main focus is on gate or circular sawing lines.

THE SAWMILL TOOL COMPANY Trimmed for cutting precision and stability TRIMCUT is a very robust circular saw blade designed specifically for trimming. Additional, optionally copper riveted, vibration-reducing laser patterns in the saw body ensure lasting...