Woodworking Machinery Equipment For Sale In Charlotte

RAPID 2442RS GRANULATOR Used 24" x 42" Granulator 100 HP Motor (20) Rotating Knives (3) fixed Bed Knives Pneumatic Hopper Tilt Pneumatic Cradle Tilt Dual Fly Wheel 8" Discharge Mounted On Casters Emergency Stop Dimensions; 74" L x 68"W x 100"H Loaded...

Head Configuration : ● (2) Heads, (1) top and (1) bottom head directly opposed. ● 1,350 x 2,620 mm (53" x 103") abrasive belts. Feed System : ●& AP-010394 ● Both heads rubber covered contact roller, each with 40 HP motor.

Arbor; 1 HP scoring motor with 3/" dia. Cutting height is 95 mm (3.7") at 90° and 67 mm (2.6") at 45°; 2- PS-011801 With movable fence, 300 mm (11.8") main saw blade dia., 100 mm (3.9") scoring blade dia., max.

Arbor, 8" - 12" max. NORTHTECH SL-1000XL Straight Line Rip Saw 10 HP - 4,500 RPM Direct drive overhead mounted arbor motor, Specifications 1" dia. Part length 17-3/4" distance between saw & column, 50" long x 30" wide table.

SPECIFICATIONS: 5 HP Feed motor with variable feed speed, 30 - 90 FPM Upper feed mat with round pin type spring loaded holddown fingers Gravity oiler PD-010664 Stock length (12" butt fed), 50 HP top & 40 HP bottom direct drive motors at 3,600 RPM, Carbide...

Specifications: Mi WM-010384 Enables automatic pneumatic positioning of the workpiece and features (2) saw units which are at an angle of 45° thereby cutting both glazing beads on both sides in a single working cycle.

Includes:< FS-010682 Variable line speed & acceleration from the control panel with a finish material recovery system. Features: CNC gun height adjustment; (2) finish material circuits, (2) belt driven reciprocating trolley carries (2) CEFLA adjustable...

This is a demonstrator machine with only 4 hours on the meter ! Head Sequence: Bottom 4 kW (5.5 HP), right & left 4 kW (5.5 HP), top 5.5 kW (7.5 HP), top 11 kW (15HP), bottom 4 kW (5.5 HP) motor.

1-1/2" - 15" Drawer height, 6" - 28" drawer depth, CF-011237 DODDS C-48M Drawer Clamp Heavy Duty vertical universal Drawer Box Clamp with fixed left jaw and motorized adjustable right clamping jaw.

Complete with: SC-012456 Crosscut at 45° is 93 mm ; inward or way from each other with positive stops at 45°, 90° & 45°. Cutting length 215 mm, max. Saw blades with 25.4 mm bore; both heads adjustable up to 2800 mm at 90° between centers on rack...

Mechanical spindle brakes. Minimum wo MF-013265 All spindles equipped with mechanical digital readouts. KENTWOOD M 509 S Feed Through Moulder: 5-Head (B-R-L-T-B), working cap. Mechanical readouts for pressure elements and chip breakers.

HOMAG BAZ 722 58/13/KC "GANTRY" CNC MACHINING CENTER (W/EDGEBANDING) + BARGSTEDT TBP 370/26/16 material handling system: Specifications: Working field (single panel); "X" Axis 5,860 mm (230"), "Y" axis 1,525 mm (60"), "Z" axis 300 mm (11.8"), max work...

Specifications: Maximum Load Size: Maximum load size 56" L x 56" MH-280280 All Wulftec structures are made of heavy-duty steel for rugged performance, even in the harshest work environments.

Northtech NT-610EL Top & Bottom Planer Capacities : 24" wide x 7.5" thick capacity; 1/4" minimum thickness; 12" minimum stock length Cutterheads : 25 HP top head; 20 HP bottom head; 5,800 RPM on cutterheads; (6) row spiral insert cutterheads, Carbide...

Specifications: Flexible "Vertical" Machining Center that uses less than 5 meter² of valuable floor space in addition to an innovative panel handling system. WEEKE BHX 055 CNC MACHINING CENTER (VERTICAL).

2nd Head: Rubber covered contact roll 12-1/2" dia. Solid wood and thick veneer sander. 66 FPS (20 MPS). (80-shore), 25 HP motor, 79 FPS (24 MPS). 3rd Head: Rubber covered contact roll 12-1/2" dia.

305 x 200 mm (12" x 7-7/8"). Spindles: diameter 40 mm (1-9/16") with cutterhead speed at 6,000 RPM . All spindles with mechanical MF-013271 Head sequence: Bottom 7.5 kW (10 HP), right 15 kW (20 HP), left 15 kW (20 HP), top 18 kW (25 HP ), top 18 kW (25...

Elect PK-011173 Variable saw carriage travel speed from 0 - 164 FPM (0 - 50 MPM). Specifications: 12 HP Main & 3.6 HP scoring motor. Modular roller rear machine table, side aligning device for squaring ripped strips out to 59".

Complete wit PS-011800 MARTIN T-71 Sliding Table Saw Specifications: 10' Cutting cap., 3-position table locking mechanism, cast iron machine table, 7.5 HP tilting saw arbor (arbor speed 2,800 - 4,000 & 5,500 RPM) with tilting from 0° - 45.5°, 1 HP -...

Worktable: (12) Movable support rails with side mounted raise-and-lower panel feeding rails, (2) vacuum pods per ra BP-280503 Position speed: "X" & "Y" axis is 262 FPM (80 MPM), "Z" axis is 98 FPM (30 MPM).

ST 001) Bedframe composed of 3 sets 24 transport wheels of .6" widedriven by invertor with helicoidal gear transmission center fixed ST 014) Lip Head ( slot nozzle LA-011091 BARBERAN PUR 81 L plus SCT 800 Cut Off Saw for wide lamination and wrapping.

2: - LIGMATECH - Powered roller conveyors for in- & outfee SX-012736 BUTFERING Profiline SUR/SCR 213 RR ... Top & Bottom Wide Belt Sanding Line with LIGMATECH Powered Roller Conveyors for In- & Outfeed & Connection between Top & Bottom Sander; consisting...

For pressing High Pressure Laminates (HPL), Backer Sheets, Wood Veneers! Flat-Belt Powered In-feed Layup Conveyor: (Not included) For laminate lay-up and loading of the press, foot pedal operated for automatic operat PF-010408

Welded steel bridge and base frame const RL-010698 Equipped with: (1) 10 HP COLOMBOATC spindle variable speed from 3,000 - 24,000 RPM, and 5-position bar style tool rack / tool changer .

Complete with EA 8 Panel Ionization Cleaning Mac SX-012738 Head configuration: (1) Segmented cross belt, (3) longitudinal segmented platen heads, and (1) brush roller. Wide Belt Sander with (4) Sanding Heads, (1) Brush Roller and EA 8 Panel Ionization...

Equipped with: 15 HP, top mounted, direct drive blower rated at 6,000 CFM. TORIT DFT 3-12 Cartridge Dust Collector Cartridge style downward flow dust collector rated at 6,000 CFM. Air-to-Media ratio: 2:1.