Watering Irrigation Irrigation Tubing For Sale In Ohio

• Assembled Width (in.): 11 in
• Manufacturer Warranty: 3 Year Warranty
• Pressure Rating: 60 psi
• Use with 1/4 in. barbed fittings: Yes
• Tubing Length (ft.): 500
• Inner Diameter (in.): 0.25

• ✓ Durable construction provides many years of reliable use
• ✓ Emitters drilled every 6 in. waters 0.9 GPH every foot at 25 psi
• ✓ Easy to install
• ✓ For outdoor use and cold water only
• ✓ For irrigation applications only

• Returnable: 90-Day

• ✓ Large inner diameter allows installation of long runs of tubing
• ✓ Dimensions = .710 OD x .620 ID

• Tubing Length (ft.): 100
• Outer Diameter (in.): .71
• Manufacturer Warranty: 1 YR
• Inner Diameter (in.): .62

• ✓ Use with DIGs 0.710 compression fittings, color blue and nut lock fittings
• ✓ Bending radius: 1.5 ft.
• ✓ Dimensions: 100 ft. with 0.620 ID x 0.710 OD
• ✓ Resistant to cracking, heat, UV rays and chemicals

• Inner Diameter (in.): .50
• Assembled Width (in.): 21 in

• ✓ Dripline dimension is 0.600 I.D. x 0.700 O.D.
• ✓ Total of 65 1-GPH PC drip emitters per 100 ft.
• ✓ Can be covered with mulch and used below or above the ground
• ✓ Each emitter continuously adjusts to varying incoming water pressures ranging from 10 to 45 PSI, ensuring a constant flow rate regardless of elevation along the dripline

• Assembled Width (in.): 23 in
• Color Family: Browns / Tans

9 in

• ✓ Two (2) outlets per each drip emitter
• ✓ Saves water by delivering water right where it is needed most, at the plant root zone

• Assembled Depth (in.): 9 in
• Irrigation System Component: Tubing
• Assembled Width (in.): 9 in
• Color Family: Blacks

• ✓ UV resistant
• ✓ Rugged and flexible, easy to unroll and stake in the garden, flower bed, ground cover or other landscaped areas
• ✓ Connect with Rain Bird 1/2 in. barbed or easy-fit compression fittings

• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Outer Diameter (in.): .70

• Manufacturer Warranty: None
• Tubing Length (ft.): 2
• Use with 1/2 In. barb fittings: Yes
• Assembled Depth (in.): 24.0 in
• Outer Diameter (in.): 0.5
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ Flow-regulated, self-flushing in-line emitters deliver equal flow over a wide pressure range and over the length of the drip line
• ✓ Total of 65 1 GPH PC drip emitters per 100 ft.
• ✓ Made to hydrate large outdoor spaces and extend drip lines
• ✓ Can be covered with mulch and used below or above the ground
• ✓ Each emitter continuously adjusts to varying incoming water pressures ranging from 10 to 45 PSI, ensuring a constant flow rate regardless of elevation along the line

• Assembled Depth (in.): 18 in

• ✓ 12 in. pre-inserted emitter spacing
• ✓ 100 ft. length
• ✓ Connects to 1/2 in. poly tubing mainline using a 1/4 in. barb fitting

• Returnable: 90-Day
• Manufacturer Warranty: 3 year warranty
• Pressure Rating: 25 psi

• ✓ Easily installed
• ✓ 50 ft. L

• Assembled Width (in.): 5.5 in
• Irrigation System Component: Tubing
• Outer Diameter (in.): .25
• Tubing Length (ft.): 50

• ✓ Total Satisfaction Policy
• ✓ Unique Micro-Porous design creates an ultra-tight connection
• ✓ 250 ft. coil with 70 psi pressure rating
• ✓ 250 ft. length for large installations
• ✓ For use with spot watering emitters

• Irrigation System Component: Tubing

• ✓ Flow-regulated, self-flushing in-line emitters deliver equal flow at a wide range of operating pressures and over a long length of drip line
• ✓ DIG's drip line is made of high quality polyethylene using resin, which has excellent environmental stress crack resistance, burst strength, puncture resistance and long-life expectancy for reliable, long-lasting performance
• ✓ Ideal for installation on difficult terrain such as on slopes, in oddly shaped areas and on windy sites
• ✓ Saves money by significantly lowering the cost of system components compared to conventional irrigation systems
• ✓ Used for groundcover, roses, shrubs, plantings in narrow areas, loops around trees or for complete coverage of an area with multiple lines of drip line placed 16 in. to 24 in. apart; can also be used around a home's foundation to reduce soil cracks

• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ 1/2 GPH flow rate from each emitter
• ✓ Brown color blends in with the landscape
• ✓ 100 ft. L

• Assembled Width (in.): 9 in
• Outer Diameter (in.): 0.25
• Manufacturer Warranty: 3 year

• ✓ Use with Toro funny pipe fittings (not included)
• ✓ Inside diameter: 0.49 in.; outside diameter: 0.68 in.

• Manufacturer Warranty: 1 year
• Irrigation System Component: Tubing
• Tubing Length (ft.): 50
• Color Family: Blacks

• ✓ Weather and abrasion resistant
• ✓ Temperature range -40°F to +160°F

• Material: Rubber
• Product Width (in.): 12
• Product Height (in.): 10
• Actual outside diameter (in.): .125

• For use with hose barbs and clamps: Yes
• Maximum Working Temperature (F): 150
• Returnable: 90-Day
• Product Depth (in.): 120
• Pipe Size: 1/2"
• Product Weight (lb.): 1.31lb

• ✓ Suitable for use with liquids, chemicals and gases
• ✓ Higher pressure ratings
• ✓ Temperature range +25°F to +150°F
• ✓ Non-toxic FDA grade compound

• Minimum working temperature (F): 25
• Product Width (in.): 18

• Actual inside diameter (in.): .188
• Material: Low-Density Polyethylene (LDPE)
• Returnable: 90-Day
• Product Height (in.): 9.5
• Certifications and Listings: No Certifications or Listings
• Non-toxic FDA grade compound: Yes

• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.
• Made in North America: Yes
• Product Depth (in.): 5
• Features: Flexible,Lead Free
• Product Weight (lb.): 15.8lb
• Certifications and Listings: No Certifications or Listings

1.25 in

• Color Family: Blacks
• Product Length (in.): 1.25 in
• Manufacturer Warranty: 3 Year Warranty
• Fitting Type: Compression Fittings
• Product Width (in.): 1.25 in
• Drip Irrigation Fitting Type: Adapter

• ✓ Turbulent flow path and self-flushing action with insect baffle to minimize blockages
• ✓ Sold in a pack of 5
• ✓ Inlet barb has built-in filter

• Irrigation System Component: Drip Irrigation Emitter
• Package Quantity: 5
• Maximum Gallons Per Minute: .016

• ✓ For irrigation applications only
• ✓ 1/2 in. MPT
• ✓ Flow adjustment screw
• ✓ Easy-to-clean filter helps prevent clogging

• Package Quantity: 1
• Returnable: 90-Day

• Features: Flexible,Lead Free
• Pipe Size: 3/8"
• Maximum working pressure (psi): 45
• Product Length (ft.): 100
• For use with hose barbs and clamps: Yes
• Certifications and Listings: No Certifications or Listings

• ✓ Easily attaches to residential outside faucets or hoses
• ✓ Total satisfaction policy
• ✓ Easy to use
• ✓ 3/4 in. female hose thread adapter

• Package Quantity: 1
• Returnable: 90-Day

• ✓ Suitable for use with liquids, chemicals and gases
• ✓ Clear with polyester reinforcement

• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.
• Product Weight (lb.): 2.3 lb
• Pipe or Fitting Product Type: Pipe & Tubing
• Actual inside diameter (in.): .250

• ✓ Grip allows for better torque, and reduces hand fatigue
• ✓ Pressure sensitive valve releases water slowly at root level
• ✓ Injection molded with high impact polymer to ensure lifetime protection
• ✓ Self-cleaning dirt arrestor screen prevents clogging of drain
• ✓ Patented backflow check prevents contamination

• Manufacturer Warranty: King Innovation products are guaranteed against faulty materials or workmanship for a period of one year from date of purchase. Contact factory for full warranty information.