Watering Irrigation Irrigation Tubing For Sale In Mesa

• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
• ✓ Manufactured with dow's 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
• ✓ Total of 65 1-GPH PC drip emitters per 100 ft.
• ✓ Flow-regulated, self-flushing in-line emitters deliver equal flow over a wide pressure range and over the length of the drip line

• Assembled Height (in.): 6 in
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

18.5 in

• Outer Diameter (in.): .71
• Assembled Width (in.): 18.5 in
• Assembled Depth (in.): 18.5 in
• Color Family: Blacks
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Irrigation System Component: Tubing

• ✓ Helps protect heads and pipes from damage by equipment
• ✓ Connects sprinkler heads to lateral pipes
• ✓ Black color

• Outer Diameter (in.): .5
• Returnable: 90-Day
• Tubing Length (ft.): 6

• ✓ Waters uniformly, improving plant health and growth
• ✓ Brown UV-resistant tubing designed for below or above ground use
• ✓ Flexible for easy installation

• Assembled Width (in.): 8 in
• Pressure Rating: 70 psi
• Assembled Height (in.): 1.9 in

• ✓ Durable for year-round use
• ✓ For use as a supply- or feeder line to any low-flow and drip-watering system

• Color Family: Blacks
• Tubing Length (ft.): 200
• Manufacturer Warranty: Limited Lifetime
• Pressure Rating: 35 psi

• Outer Diameter (in.): .63
• Drip Line/Tubing Type: Porous Tubing
• 100 foot coil: Yes
• Irrigation System Component: Tubing
• Assembled Depth (in.): 20.8 in
• Returnable: 90-Day

17 in

• Color Family: Blacks
• Assembled Depth (in.): 17 in
• Assembled Width (in.): 17 in
• Outer Diameter (in.): .7
• Tubing Length (ft.): 100
• Compatible with typical spray or rotating sprinklers with a male or female inlet: Yes

• Color Family: Blacks
• Returnable: 90-Day
• Ideal for slow, deep root watering: Yes
• Assembled Width (in.): 7.000 in
• Inner Diameter (in.): 0.25
• Drip Line/Tubing Type: Porous Tubing

• ✓ Saves water by delivering water right where it is needed most, at the plant root zone
• ✓ No special tools or glues necessary for installation

• Assembled Height (in.): 3 in
• Drip Line/Tubing Type: Porous Tubing
• Manufacturer Warranty: 3 year warranty
• Assembled Depth (in.): 9 in

• ✓ Total of 65 1 GPH PC drip emitters per 100 ft.
• ✓ Maximum run length of 369 ft. can be achieved from a single water source at 45 PSI
• ✓ Manufactured with dow's 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays

.50

• Inner Diameter (in.): .50
• Outer Diameter (in.): .50
• Assembled Height (in.): 4.75 in

• ✓ Anti-clogging dual outlet emitters
• ✓ No special tools or glues necessary for installation
• ✓ 6 in. pre-inserted emitter spacing
• ✓ Versatile drip line saves money, time and water

• Tubing Length (ft.): 100
• Assembled Width (in.): 9 in

• ✓ Total of 500 1 GPH PC drip emitters per 500 ft. of dripline
• ✓ Large labyrinth water passage and filter intake area in each dripper are continuously flushed by the water flow to reduce clogging
• ✓ Manufactured from linear low-density polyethylene resin with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays

• Assembled Height (in.): 12 in
• Tubing Length (ft.): 500
• Manufacturer Warranty: 3 years

• Pressure Rating: 60 psi
• Tubing Length (ft.): 500
• Assembled Width (in.): 11 in
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Inner Diameter (in.): 0.25
• Interchangeable with other manufacturers' brands of the same O.D. size micro tubing: Yes

• ✓ 50 ft. L
• ✓ Works with all 1/4 in. barb fittings

• Irrigation System Component: Tubing
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Tubing Length (ft.): 50
• Inner Diameter (in.): 0.25

• ✓ Works with most new or existing drip systems
• ✓ Easy to use and cut

• Inner Diameter (in.): 0.5
• Manufacturer Warranty: None
• Irrigation System Component: Tubing
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ Designed to work with Toro Blue stripe drip-irrigation products
• ✓ 3-layer Matrix technology for improved strength and flexibility
• ✓ Large inner diameter allows installation of long runs of tubing
• ✓ Linear low-density polyethylene tubing is made from high-grade polyethylene resins
• ✓ Minimum 2% carbon black UV inhibitor added for resistance to sunlight deterioration

• Outer Diameter (in.): .71

• ✓ Easy to install
• ✓ Suggested operating pressure: 25 PSI
• ✓ For short runs up to a maximum length of 30 ft.

• Color Family: Blacks
• Irrigation System Component: Tubing
• Assembled Height (in.): 2.25 in

• ✓ Pressure rating of 70 psi
• ✓ Use to run water from faucet or valve to the planting area

• Returnable: 90-Day
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Tubing Length (ft.): 100
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• Pipe & Tubing Product Type: Specialty
• Minimum working temperature (F): -20
• Pipe Size: 1/8"
• Actual inside diameter (in.): .0625
• Material: Rubber
• Product Height (in.): 10

• ✓ Clear with polyester reinforcement
• ✓ Suitable for use with liquids, chemicals and gases

• Product Height (in.): .440 in
• Material: Vinyl
• Returnable: 90-Day
• Pipe & Tubing Product Type: Specialty

• ✓ Fixed nozzle socket to removes brass nozzles
• ✓ Green and black in color
• ✓ 5 screw driver bits for adjusting spray heads and cleaning nozzles

• Material: Metal
• Manufacturer Warranty: None
• Returnable: 90-Day

• ✓ Black color
• ✓ Non-reinforced PVC compound

• Certifications and Listings: No Certifications or Listings
• Maximum working pressure (psi): 20
• Product Width (in.): 2.20
• Material: Vinyl

• ✓ Provides easy one-step installation of Rain Bird dripper/emitters, 1/4 in. fittings and tubing goof plugs
• ✓ Provides easy install of emitters, plugs & 1/4" barbed fittings
• ✓ To more easily install emitters and 1/4 in. fittings in 1/2 in. tubing use a slight twisting action when inserting

• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Product Height (in.): 8.4
• Product Width (in.): 4.4

• ✓ UV resistant
• ✓ Pressure-compensating emitters ensure even watering and save water
• ✓ Dimensions = 0.710 O.D. x 0.620 I.D.

• Inner Diameter (in.): .62
• Assembled Width (in.): 24 in
• Irrigation System Component: Tubing

• ✓ Molded, high-impact, plastic construction for long life
• ✓ For irrigation applications only
• ✓ For use with 1/2 in. riser flex pipe

0.50

• Inner Diameter (in.): 0.50
• Returnable: 90-Day
• Outer Diameter (in.): 0.50

• ✓ Replacement sprinkler valve/controller diaphragm kit
• ✓ Primary application: residential installation
• ✓ Quality construction
• ✓ Includes rubber diaphragm, screws, spring, and solenoid filter
• ✓ Restore irrigation valves to proper on-off operation

• Irrigation System Component: Kit

• Assembled Depth (in.): 3.000 in
• Inner Diameter (in.): 0.25
• Tubing Length (ft.): 50
• Returnable: 90-Day
• Pressure Rating: 25 psi
• UV-resistant: Yes