Watering Irrigation Irrigation Tubing For Sale In Jackson

• ✓ Black in color
• ✓ For drip irrigation applications only
• ✓ Waters 0.25 GPH every 5 ft. at 25 psi
• ✓ Note: product may vary by store

• Outer Diameter (in.): 0.25
• Assembled Depth (in.): 3.0 in

• ✓ 100 mil thick
• ✓ Up to 30% more flexible than competitors
• ✓ 24 in. L

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Color Family: Blacks
• Assembled Depth (in.): 24 in

• ✓ Note: product may vary by store
• ✓ 100 mil thick

• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Pressure Rating: 80
• Inner Diameter (in.): .5
• Tubing Length (ft.): 100

• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
• ✓ Flow-regulated, self-flushing in-line emitters deliver equal flow over a wide pressure range and over the length of the drip line
• ✓ Maximum run length of 369 ft. can be achieved from a single water source at 45 PSI

• Irrigation System Component: Tubing
• Manufacturer Warranty: 3 Year Warranty
• Inner Diameter (in.): .50

• ✓ Use with DIG Maverick 12-outlet drip manifolds (Models PC1202, PC1204, PC12100 and PC14100)
• ✓ 50 ft. L

• Assembled Height (in.): 5 in
• Assembled Depth (in.): 2.5 in
• Outer Diameter (in.): .125
• Pressure Rating: 35 psi

0.25

• Assembled Height (in.): 2.5 in
• Outer Diameter (in.): 0.25
• Color Family: Blacks
• Inner Diameter (in.): 0.25
• Low density polyethylene construction: Yes
• Manufacturer Warranty: 3 years

• ✓ Produced using dows 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
• ✓ Use with DIGs 0.710 compression fittings, color blue and nut lock fittings
• ✓ Maximum recommended flow rate per each length of drip tubing is not to exceed 228 GPH (3.8 GPM)
• ✓ Used as the primary supply line in a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected

• Irrigation System Component: Tubing
• Pressure Rating: 80

• ✓ Made in USA
• ✓ 1/2 gallon per hour turbulent flow drippers spaced at 12 in. intervals

• Inner Diameter (in.): 0.25
• Irrigation System Component: Pipe
• Pressure Rating: 25
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ 100 ft. length
• ✓ 12 in. pre-inserted emitter spacing

9 in

• Drip Line/Tubing Type: Porous Tubing
• Assembled Height (in.): 9 in
• Assembled Depth (in.): 9 in
• Returnable: 90-Day

• ✓ Close the end of the line with a goof plug
• ✓ Suggested operating pressure: 25 PSI
• ✓ Flow Rates: 17 GPH per 50 ft(.4 GPH per foot)

• Assembled Height (in.): 2.25 in
• Returnable: 90-Day
• Irrigation System Component: Tubing

• ✓ 1/2 gallon per hour (GPH) emitters every 6 in. are factory-installed for uniform water distribution
• ✓ Factory-installed emitters cut installation time

• Assembled Depth (in.): 10.5 in
• Inner Diameter (in.): .170
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Returnable: 90-Day

• Maximum working pressure (psi): 250
• Suitable for use with liquids, chemicals and gases: Yes
• Pipe & Tubing Product Type: Specialty
• Features: Flexible,Lead Free
• Material: Vinyl
• Application: Sewer & Drain,Water Supply

• Irrigation System Component: Tubing
• Returnable: 90-Day
• Drip Line/Tubing Type: Porous Tubing
• Connects to 1/2 in. poly tubing mainline using a 1/4 in. barb connector: Yes
• Manufacturer Warranty: 3 Years
• Assembled Width (in.): .7 in

9 in

• Returnable: 90-Day
• Irrigation System Component: Tubing
• Saves water by delivering water right where it is needed most, at the plant root zone: Yes
• Assembled Width (in.): 9 in
• Manufacturer Warranty: 3 year warranty
• Assembled Depth (in.): 9 in

• ✓ Black fittings are .600 ID (inside diameter) x .700 OD (outside diameter)
• ✓ No special tools or glues needed

• Product Length (in.): 2.25 in
• Material: ABS Plastic
• Package Quantity: 1
• Color Family: Blacks

• ✓ Adjustable nozzle - 25 to 360°
• ✓ Compatible with all Orbit, Rain Bird and Hunter spray heads and nozzles
• ✓ No special tools required, simply attach and adjust by hand
• ✓ Spray distance of 18 ft.
• ✓ Made of durable plastic for years of precision watering

• Returnable: 90-Day

0.5

• Inner Diameter (in.): 0.5
• Package Quantity: 1
• Works with the most common sizes of 1/2 in. drip tubing (0.670- 0.710 O.D.): Yes
• Color Family: Blacks
• Product Height (in.): 2.375
• Outer Diameter (in.): 0.5

• Returnable: 90-Day
• Made from high-quality durable materials: Yes
• Outer Diameter (in.): .50
• Pressure Rating: 25
• Product Height (in.): 2
• Product Width (in.): 1

• ✓ No special tools or glues needed
• ✓ Connects to any outdoor faucet or garden hose

• Package Quantity: 1
• Included: Backflow Preventer,Tubing
• Returnable: 90-Day
• Manufacturer Warranty: 3 year

• ✓ Easy to replace in timer
• ✓ For irrigation applications
• ✓ For cold water use only
• ✓ For use with all makes of sprinkler timers
• ✓ For installation, consult timer manual

• Manufacturer Warranty: 1 year

• ✓ Dura-coated
• ✓ Saves time and money
• ✓ Slip resistant

• Package Quantity: 1
• Irrigation System Component: Accessory
• Manufacturer Warranty: 3 Years

1.13

• Temperature range +25°F to +150°F: Yes
• Maximum working pressure (psi): 100
• Product Length (ft.): 2
• Product Width (in.): 1.13
• Certifications and Listings: No Certifications or Listings
• Product Height (in.): 1.13

• ✓ Made in the USA
• ✓ Lightweight, easy to move, and incredibly durable
• ✓ Commercial Grade construction stands up to the elements
• ✓ RB or Riverbed color includes brown and black tones and highlights
• ✓ Ideal cover and protection for most small backflow devices found within the residential and commercial sprinkler system

• Manufacturer Warranty: 5 years manufacturing defect for replacement

• ✓ For outdoor use only
• ✓ Connects an underground pipe to a sprinkler head
• ✓ 1/2 in. x 1/2 in. x 2 in. size for connection to compatible pipes and sprinkler heads
• ✓ Do not insert fingers
• ✓ For irrigation applications only

• Irrigation System Component: Riser

• ✓ Removes 1/2 in. and 3/4 in. broken risers from fittings
• ✓ Plastic-coated handle for a secure grip
• ✓ Easy to use

• Product Depth (in.): 1.25
• Manufacturer Warranty: None
• Product Width (in.): 4.75

• ✓ Inlet size: 1/4 in. barb, outlet side: 1/8 in. barb; filter requirement: 150 mesh
• ✓ Design of the drip emitter‘s self-activated flushing mechanism ensures continuous flushing of sediments and small particles for better operation over time; colored barbed cap outlet enables easy identification of dripper flow rate; the barbed outlet can be configured to work with 1/8 in. or 1/4 in. micro tubing for branching from the dripper

• Product Width (in.): 4
• Manufacturer Warranty: 3 year warranty
• Gallons per Hour: 0.5
• Color Family: Browns / Tans

• ✓ Compatible with Lawn Genie and Rain Jet manual valve models
• ✓ Easy to replace

• Irrigation System Component: Accessory
• Manufacturer Warranty: 1 year
• Package Quantity: 2