Watering Irrigation Irrigation Tubing For Sale In Fort Worth

• ✓ Manufactured using 3-layer matrix technology to provide superior strength and flexibility
• ✓ Larger-diameter tubing allows for more emitters on the same line
• ✓ 1-gallon per hour emitters installed every 18 in.

• Tubing Length (ft.): 100
• Inner Diameter (in.): .62
• Assembled Height (in.): 5.5 in

• ✓ 1/4 Inch wide
• ✓ For drip irrigation applications only

0.25

• Manufacturer Warranty: None
• Irrigation System Component: Tubing
• Outer Diameter (in.): 0.25
• Inner Diameter (in.): 0.25

• ✓ Can be used to run water to emitter tubing
• ✓ 70 psi

• Returnable: 90-Day
• Tubing Length (ft.): 250
• Assembled Depth (in.): 10.5 in
• Outer Diameter (in.): .255

• ✓ Kink resistant materials help provide dependable water flow
• ✓ Flexible for easy installation
• ✓ To water plants, add 1/4 in. tubing barbed couplings or drippers

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Assembled Height (in.): 3.8 in
• Assembled Width (in.): 20.3 in

• ✓ Ideal for repairs to piping systems
• ✓ Flexible pipe means fewer fittings required and joints to glue in piping systems

• Assembled Height (in.): 1.125 in
• Returnable: 90-Day
• Irrigation System Component: Pipe
• Color Family: Blacks

• ✓ Clog-resistant pressure compensating emitters
• ✓ Connect with Rain Bird 1/2 in. barbed or easy-fit compression fittings

• Returnable: 90-Day
• Tubing Length (ft.): 100
• Assembled Depth (in.): 20.0 in
• Irrigation System Component: Tubing

• ✓ Large inner diameter allows installation of long runs of tubing
• ✓ 1 to 60 psi pressure rating

• Outer Diameter (in.): .71
• Tubing Length (ft.): 500
• Irrigation System Component: Tubing
• Returnable: 90-Day

• ✓ 3/8 in. I.D. flexible tubing
• ✓ Great for installing or relocating sprinklers in hard-to-reach areas
• ✓ Cushions the sprinkler to help prevent damage

• Tubing Length (ft.): .67
• Assembled Width (in.): 2.13 in
• Assembled Depth (in.): 10.75 in

• ✓ PC drip-line be used above or below ground
• ✓ Manufactured with dow's 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
• ✓ Total of 65 1 GPH PC drip emitters per 100 ft.
• ✓ Each emitter continuously adjusts to varying incoming water pressures ranging from 10 to 45 PSI, ensuring a constant flow rate regardless of elevation along the line

• Assembled Depth (in.): 18 in
• Outer Diameter (in.): .50

• ✓ Emitters are designed for clog-resistant flow to help ensure even, reliable watering
• ✓ Emitters feature two outlet holes, one on either side of tubing (180° apart)

• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Returnable: 90-Day
• Assembled Height (in.): 1.9 in
• Assembled Depth (in.): 7.8 in

• ✓ Helps minimize repairs and prolongs sprinkler life
• ✓ Black
• ✓ Versatile EZ pipe creates flexible connections for your sprinklers
• ✓ Allows for more accurate positioning of sprinklers

• Assembled Depth (in.): 20 in
• Color Family: Blacks

• ✓ Waters uniformly, improving plant health and growth
• ✓ Rugged and flexible
• ✓ Total Satisfaction Policy

• Inner Diameter (in.): .54
• Outer Diameter (in.): .63
• Irrigation System Component: Tubing

• ✓ Resistant to cracking, heat, UV rays and chemicals
• ✓ Maximum recommended flow rate per each length of drip tubing is not to exceed 228 GPH (3.8 GPM)
• ✓ Use with DIGs 0.710 compression fittings, color blue and nut lock fittings

• Inner Diameter (in.): .50
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Tubing Length (ft.): 100

• ✓ 10 foot length
• ✓ Easy to install
• ✓ For outdoor use only

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Manufacturer Warranty: None
• Assembled Width (in.): 12.0 in

• ✓ Made of high-quality polyethylene that is flexible and contains no harmful chemicals
• ✓ 1/2 gallon per hour (GPH) emitters every 6 in. are factory-installed for uniform water distribution

• Tubing Length (ft.): 100
• Color Family: Blacks
• Returnable: 90-Day
• Outer Diameter (in.): .250

• ✓ Consists of 100 ft. of 1/2 in. with .700 OD pressure compensating (PC) dripline
• ✓ Maximum run length of 202 ft. can be achieved from a single water source at 45 psi
• ✓ Can be covered with mulch and may used below or above the ground

• Assembled Height (in.): 6 in
• Assembled Width (in.): 17.5 in
• Pressure Rating: 10-45 PSI

• Irrigation System Component: Tubing
• Assembled Height (in.): 2.25 in
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Color Family: Blacks
• Assembled Depth (in.): 5.5 in
• Inner Diameter (in.): 0.25

• ✓ Pulls up and then holds a spray head stem to keep it from retracting
• ✓ Rugged steel pliers hold the nozzle stem in extended position
• ✓ Rugged steel pliers hold the nozzle stem firmly in extended position
• ✓ Works with all major nozzle brands: Rain Bird, Hunter, Toro orbit

• Product Depth (in.): 1
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• ✓ Saves water by delivering water right where it is needed most, at the plant root zone
• ✓ Made from high quality, UV resistant materials

• Assembled Width (in.): .7 in
• Assembled Height (in.): 1.75 in
• Drip Line/Tubing Type: Porous Tubing
• Assembled Depth (in.): 7 in

• ✓ Waters uniformly, improving plant health and growth
• ✓ .9 GPH (3.4 LPH) flow per emitter
• ✓ Rugged and flexible
• ✓ Works like soaker hose - only better
• ✓ 50 foot coil

• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• ✓ Sized to 0.7 in. outside diameter
• ✓ For cold water use only
• ✓ Works with most new or existing drip systems
• ✓ For drip irrigation applications

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Outer Diameter (in.): 0.5

• ✓ PVC compounds with polyester braiding
• ✓ High quality construction ensures excellent performance and longer life

• Actual inside diameter (in.): .625
• Maximum Working Temperature (F): 150
• Actual outside diameter (in.): .875
• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.

• ✓ Suitable for use with liquids, chemicals and gases
• ✓ Clear with polyester reinforcement
• ✓ For use with hose barbs and clamps
• ✓ Temperature range +25°F to +150°F

• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.
• Pipe Size: 1-1/4"

• ✓ Operating pressure: 80 psi
• ✓ Superior flexibility allows pipe to be efficiently routed

• Assembled Height (in.): 2 in
• Assembled Depth (in.): 24 in
• Outer Diameter (in.): .5
• Color Family: Blacks

• Works with any typical spray or rotating sprinkler with a male or female inlet: Yes
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Outer Diameter (in.): .7
• Irrigation System Component: Tubing
• Inner Diameter (in.): .495
• Color Family: Blacks

• ✓ Connects to 1/2 in. sprinkler risers
• ✓ Use with 1/8 in. or 1/4 in. micro tubing
• ✓ Built-in pressure compensating emitters provide consistent flow

• Manufacturer Warranty: 3 Year Warranty
• Number of pieces included: 47
• Color Family: Blacks

• ✓ Simply place an emitter or fitting into specialized opening in end of tool; press barbed point into side wall of 1/2 in. tubing
• ✓ Secures tubing and emitters to water individual plants
• ✓ Provides easy one-step installation of Rain Bird dripper/emitters, 1/4 in. fittings and tubing goof plugs
• ✓ Facilitates a fast and convenient installation

• Color Family: Purples / Lavenders
• Irrigation System Component: Irrigation Tool