Watering Irrigation Irrigation Tubing For Sale In California

• ✓ Reduced clogging due to large drip emitter labyrinth water passage
• ✓ Designed for placement in both new and existing landscape areas including green-roof areas
• ✓ Can be covered with mulch and used below or above ground

• Inner Diameter (in.): 0.50
• Assembled Width (in.): 19.5 in
• Assembled Height (in.): 5.5 in

• ✓ 500 ft. L
• ✓ Available in length of 50 ft., 100 ft., and 500 ft. coils

• Assembled Width (in.): 11 in
• Manufacturer Warranty: 3 Year Warranty
• Pressure Rating: 60 psi
• Returnable: 90-Day

• ✓ Made from high quality, UV resistant materials
• ✓ 1/2 GPH flow rate from each emitter
• ✓ No special tools or glues necessary for installation

• Manufacturer Warranty: 3 year warranty
• Drip Line/Tubing Type: Porous Tubing
• Assembled Height (in.): 9 in

• ✓ Saves water by delivering water right where it is needed most, at the plant root zone
• ✓ Brown color blends in with the landscape
• ✓ The brown finish easily blends in with your soil and landscape

• Assembled Width (in.): 9 in
• Outer Diameter (in.): .25
• Irrigation System Component: Tubing

• ✓ 60 PSI pressure rating
• ✓ Linear low-density polyethylene tubing is made from high-grade polyethylene resins

• Assembled Height (in.): 4.5 in
• Returnable: 90-Day
• Assembled Depth (in.): 17 in
• Outer Diameter (in.): .71

• Pressure Rating: 161 psi
• Dimensions = .250 OD x .170 ID: Yes
• Assembled Width (in.): 10.5 in
• Irrigation System Component: Tubing
• Outer Diameter (in.): .25
• Tubing Length (ft.): 100

• ✓ Can water up to 60 containers
• ✓ Enjoy less work in the garden
• ✓ Additional emitters sold separately
• ✓ Extremely durable for all-weather performance, yet easy to cut with scissors
• ✓ Neutral color complements any outdoor living space

• Manufacturer Warranty: No

8 in

• ✓ Use with 1/4 in. barbed fittings and stakes
• ✓ Black color
• ✓ 25 to 30 psi recommended operating pressure

• Assembled Depth (in.): 8 in
• Color Family: Blacks
• Assembled Width (in.): 8 in

• ✓ Watering provides full length, slow and steady flow
• ✓ For cold water use only
• ✓ A single 1/4 in. soaker line should not exceed 15 ft.
• ✓ Easy to install

0.25

• Inner Diameter (in.): 0.25
• Outer Diameter (in.): 0.25

• ✓ Total of 65 1-GPH PC drip emitters per 100 ft.
• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
• ✓ Use with DIG black insert, 0.700 compression fittings, brown barbed fittings and nut lock fittings

• Assembled Depth (in.): 23 in
• Outer Diameter (in.): .50
• Tubing Length (ft.): 250

• ✓ Use for groundcover, roses, shrubs, plantings in narrow areas or loops around trees.
• ✓ Maximum run length of 202 ft. can be achieved from a single water source at 45 psi
• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
• ✓ Discharges 1 GPH per each drip emitter at 10 to 45 psi

• Assembled Height (in.): 6 in
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ Black
• ✓ Enhanced kink resistance up to 30% more flexible than other swing pipe brands
• ✓ 0.49 in. (1,24 cm) I.D.
• ✓ Allows for more accurate positioning of sprinklers

• Assembled Depth (in.): 20 in
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• ✓ Can be buried or left out on the surface in any weather
• ✓ For use as a supply- or feeder line to any low-flow and drip-watering system

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Pressure Rating: 35 psi
• Color Family: Blacks
• Returnable: 90-Day

• ✓ Maximum operating pressure: 60 psi
• ✓ Used as the primary supply line in a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected

• Assembled Depth (in.): 21 in
• Returnable: 90-Day
• Assembled Height (in.): 4 in
• Irrigation System Component: Tubing

• Inner Diameter (in.): 0.25
• Manufacturer Warranty: None
• Compatible with all drip irrigation systems: Yes
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Irrigation System Component: Tubing
• Assembled Width (in.): 7.000 in

• ✓ For use above or below ground
• ✓ Maximum recommended operating pressure: 60 psi
• ✓ Conveniently water your plants with drip irrigation
• ✓ Use with DIG Corp 1/4 in. barb fittings
• ✓ 100 ft. of tubing length

• Outer Diameter (in.): 0.25

.625

• Made in North America: Yes
• Material: Vinyl
• Maximum working pressure (psi): 30
• Product Width (in.): .625
• Actual outside diameter (in.): .625
• Pipe or Fitting Product Type: Pipe & Tubing

• ✓ Suitable for use with air and water lines
• ✓ Use as pneumatic control line

• Product Weight (lb.): .29lb
• Returnable: 90-Day
• Pipe Size: 1/4"
• Pipe & Tubing Product Type: Specialty

• ✓ 50 ft length of tubing
• ✓ 1/4 Inch wide
• ✓ Easy to cut
• ✓ For drip irrigation applications only

• Outer Diameter (in.): 0.25
• Returnable: 90-Day

• Application: Sewer & Drain,Water Supply
• For use with hose barbs and clamps: Yes
• Product Depth (in.): 4
• Product Length (ft.): 100
• Minimum working temperature (F): 25
• Pipe & Tubing Product Type: Specialty

• ✓ Helps makes sprinkler installation quick and easy with no cutting, glue or clamps required
• ✓ 3/8 in. I.D. flexible tubing
• ✓ Pre-installed funny pipe fittings

• Irrigation System Component: Tubing
• Pressure Rating: 120 psi
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ Allows connection of 3/4 in. hose and 1/2 in. hose (not included)
• ✓ For 0.700 or 0.634 drip tubing

• Drip Irrigation Fitting Type: Adapter
• Product Length (in.): 6.5 in
• Package Quantity: 1
• Inner Diameter (in.): .58

• ✓ 2 simple steps are needed to install this kit: step 1 - connect to water source, step 2 - lay out the supply tubing - no need to add drippers or connectors because they are already pre-installed in the dripper line
• ✓ Kit has everything you need to get started with drip irrigation

• Irrigation System Component: Kit
• Color Family: Browns / Tans
• Manufacturer Warranty: 2 year limited
• Package Quantity: 1

• ✓ Operates reliably at any pressure between 10 and 55 psi
• ✓ Connects to 1/4 in. micro tubing or directly into 1/2 in. poly tubing
• ✓ Delivers a flow rate of 1 GPH

• Gallons per Hour: 1
• Returnable: 90-Day
• Tubing Size: 1/4"

• ✓ For use in a sprinkler and irrigation system
• ✓ Each tee has 3 openings
• ✓ Accepts any manufacturer's O.D. tubing from 0.630" to 0.700"

• Drip Irrigation Fitting Type: Tee
• Product Height (in.): 8.800 in
• Returnable: 90-Day

• ✓ Low density polyethylene construction
• ✓ Designed not to kink or crimp
• ✓ Use as a primary feeder line from a 1/2 in. poly-tube

• Returnable: 90-Day
• Tubing Length (ft.): 50
• Color Family: Blacks

• ✓ No steel splinters
• ✓ Rugged design protects pipe from soil entry
• ✓ For use with 1 in. 100# poly pipe
• ✓ Kit includes grip, chain/adapter, and bullet

• Manufacturer Warranty: King Innovation products are guaranteed against faulty materials or workmanship for a period of one year from date of purchase. Contact factory for full warranty information.
• Package Quantity: 1