Watering Irrigation Irrigation Controllers For Sale In Kelowna

• ✓ Operating pressure: 20 to 125 psi
• ✓ Minimum flow to operate: .25 to 20 GPM

• Timing Segments: 1 minute
• Sprinkler Type: Fixed,Pop-Up
• Back Battery Type: Alkaline
• Program Type: Odd/Even Day Program,Programmable,Rain Delay,Schedule Programming

• ✓ Environmentally friendly uses clean, renewable solar power with no backup battery or AC power
• ✓ Run times from 1 minute to 6 hours
• ✓ Rain sensor compatible

• Irrigation System Component: Controller/Timer
• Number of Zones: 1
• Power Type: Battery

• ✓ Manual irrigation cycle can be performed via the timer's manual program button or via the solenoid
• ✓ 3-year warranty
• ✓ No wiring or digging required
• ✓ 1 button for program off until reactivated or as an irrigation suspension override (rain mode)

• Compatibility Type: Rain Sensor Compatible
• Returnable: 90-Day

• ✓ Barbed ends for direct insertion into the side of 1/2 in. drip irrigation tubing
• ✓ Non-pressure compensating, low flow 1 GPH
• ✓ Barbed ends for use with 1/4 in. or 1/2 in. drip irrigation tubing
• ✓ 25 Pack - Non-pressure compensating, medium flow 1.0 GPH

• Product Width (in.): 1
• Dripper Type: Button

• ✓ Made of durable, UV-resistant materials for years of dependable use
• ✓ Removable fitting

• Product Length (in.): 2.25
• Material: Polyethylene
• Outer Diameter (in.): 0.5
• Fitting Type: Push to Connect Fittings

• ✓ Durable, closed end design protects pipe from soil entry
• ✓ No tape required
• ✓ Compatible for 3/4 in. to 2 in. polyethylene pipe
• ✓ No steel splinters
• ✓ For use with 1 in. 100# poly pipe

• Package Quantity: 1

• Maximum Gallons Per Minute: .016
• Color Family: Blacks
• Spray Pattern: Drip
• Product Height (in.): 5.5
• Tubing Size: 1/2"
• 1 GPH flow rate: Yes

• ✓ Adjustable stainless steel screw reduces the radius by up to 25%
• ✓ Color coded - allows for easy identifications

• Returnable: 90-Day
• Package Quantity: 1
• Irrigation System Component: Nozzle

• ✓ 570 MPR+ nozzles are also available in specialty patterns for unlimited design flexibility
• ✓ Matched precipitation rate (MPR) ensures even water distribution
• ✓ Pre-installed pressure-compensating device (PCD) conserves water by eliminating fogging and misting

• Package Quantity: 1
• Irrigation System Component: Nozzle
• Returnable: 90-Day

• ✓ Zero-flush seal helps prevent water loss at start-up while keeping dirt and debris from entering the sprinkler
• ✓ Compatible with Toro 570 fixed-spray and specialty pattern nozzles (sold separately)
• ✓ Flush plugs are included to keep dirt and debris out during maintenance or installation
• ✓ Ideal for small lawn and shrub areas
• ✓ Install Toro matched precipitation rate (MPR) nozzles to ensures even water distribution, any pattern and any radius to prevent over or under watered areas
• ✓ Radius reduction screw reduces spray radius up to 25% so you can customize each sprinkler according to landscape needs

• ✓ Impact and weather resistant design produced from heavy-duty polyethylene construction
• ✓ Installation and ventilation hardware included

• Irrigation System Component: Accessory
• Manufacturer Warranty: 5 years manufacturing defect for replacement
• Package Quantity: 1

• ✓ High-quality, UV resistant materials for long life in the landscape
• ✓ Adjustable 0-10 GPH flow rate

Adjustable

• Color Family: Blacks
• Gallons per Hour: Adjustable
• Tubing Size: Fits All Tubing Sizes
• Dripper Type: Adjustable

• ✓ Extra-large o-rings ensure a watertight seal
• ✓ The o-ring ensures a watertight connection
• ✓ Use with Orbit's 1, 2 and 3 port manifolds and sprinkler valve systems
• ✓ For irrigation applications only

• Package Quantity: 1
• Manufacturer Warranty: 6 years

• ✓ Standardly furnished with 20 mesh screen
• ✓ Wye type strainer for domestic water applications

• Manufacturer Warranty: All goods sold hereunder are warranted to be free from defects in material and factory workmanship for a period of one year from date of purchase.
• Returnable: 90-Day
• Irrigation System Component: Irrigation Tool

• ✓ Slow and even water flow (0.35 Gallons per hour per dripper) reduces water waste up to 70% while providing sufficient hydration for your plants
• ✓ Compatible with any timer, faucet, and garden hose
• ✓ Complete kit with preassembled components perfect for watering flower beds, gardens and lawns

• Returnable: 90-Day
• Irrigation System Component: Kit
• Kit Type: Drip Irrigation Kit

• ✓ Fittings are barbed for easy, no-tool installation
• ✓ No-leak fit
• ✓ 15-pack

• Product Height (in.): 5.5
• Fitting Type: Barb Fittings
• Pressure Rating: 161

• ✓ Converts your female garden hose inlet to male pipe thread
• ✓ Backed by a 3-year warranty for your satisfaction
• ✓ Maximum working pressure of 100 PSI

• Inner Diameter (in.): .75
• Material: ABS Plastic
• Manufacturer Warranty: 3 Year Warranty

• ✓ Used to install PVC sprinkler systems
• ✓ Saves time no glue, primer, clamps or drying time required

• Inner Diameter (in.): 0.5
• Package Quantity: 1
• Returnable: 90-Day
• Irrigation System Component: Fittings & Connectors

• ✓ Operates at very low flow from less than 1 gallon per minute up to 12 gallons per minute
• ✓ Inlet and outlet size: 3/4” FNPT inlet X 3/4” MPT outlet or .700 OD drip size connection
• ✓ Operating pressure: 10 to 100 PSI

• Package Quantity: 1
• Kit Type: Drip Valve Kit
• Returnable: 90-Day

• ✓ Double-pop flushes on startup and shutdown to help keep the nozzle clear of debris
• ✓ Can be used with other MP Rotator models on the same zone for system flexibility
• ✓ Versatile design is suitable for new irrigation systems and for revitalizing old systems
• ✓ Adjustable sprinkler offers a 13 - 21 ft. radius and a full-circle arc
• ✓ Low prescription rate helps to minimizes runoff
• ✓ Multi-trajectory rotating streams provide even watering and minimal water use

• ✓ Quick tips; dip ends of tubing in warm water for a minute to soften up before inserting into fitting, and twist fitting onto tubing while inserting if necessary
• ✓ Hose fitting

• Inner Diameter (in.): .63
• Pressure Rating: 0 to 60 psi
• Drip Irrigation Fitting Type: Coupling
• Returnable: 90-Day

• ✓ Built-in mini disk filter provides additional system protection and easy cleaning
• ✓ Connects to 1/2 in. sprinkler risers
• ✓ Designed for new and existing landscapes, including oddly shaped areas where a sprinkler head cannot provide good coverage

• Package Quantity: 1
• Kit Type: Drip Riser Kits
• Manufacturer Warranty: 3 Year Warranty

• ✓ Fits Lawn Genie L7010, L7034 and RainJet 711DLG, 713DLG valves
• ✓ Easy to replace
• ✓ High quality material for long life

• Irrigation System Component: Accessory
• Package Quantity: 1

• ✓ Solid brass for strength and durability
• ✓ For use with plastic or copper floats
• ✓ MPT ends on both ends
• ✓ Float valve stem

• Manufacturer Warranty: Watts (the "Company") warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.
• Irrigation System Component: Accessory

• ✓ Textured base and collar are easy to grip, even when wet
• ✓ Ideal for watering odd-shaped areas
• ✓ No tools required, just a twist of center collar adjusts the arc

• Irrigation System Component: Nozzle
• Returnable: 90-Day
• Manufacturer Warranty: Rain Bird replace at no charge any Rain Bird professional product that fails in normal use within a 3 year warranty period stated below. Product failures due to acts of God including without limitation, lightning and flooding, are not covered by this warranty.

• ✓ Dual barbed ends for use with 1/4 in. and 1/2 in. drip tubing
• ✓ Total satisfaction policy
• ✓ Medium-flow 2.0 GPH

• Tubing Size: Fits All Tubing Sizes
• Irrigation System Component: Drip Irrigation Emitter
• Pressure Rating: 30 psi

• ✓ Extra long filter provides longer time between cleanings
• ✓ Fixed half circle pattern - 10 ft. spray nozzle

• Manufacturer Warranty: 2 Year Limited Warranty
• Irrigation System Component: Nozzle
• Package Quantity: 1