Agiseek home

Watering Irrigation Drip Irrigation Tubing For Sale In St Petersburg

Become a Partner
1/4 in. x 100 ft. Poly Tubing
Prices start at : 7.58 USD / each

DIG Corp's 1/4 in. The durable micro tubing is manufactured of high quality, professional grade materials and can be used either above or below ground. Polyethylene micro tubing is used in the installation of drip irrigation system.
  •  For use above or below ground
  •  Made of high quality, linear low-density polyethylene resin
  •  Maximum recommended operating pressure: 60 psi
  • Pressure Rating: 60 psi
  • Color Family: Blacks
  • Drip Line/Tubing Type: Drip or Emitter Line Tubing
Florida
St. Petersburg
1/4 in. x 50 ft. Porous Soaker Tubing
Prices start at : 6.35 USD / each

The Orbit Soaker Tubing is easy to install and is ideal for watering flowerbeds, closely planted areas, potted plants and vegetable gardens. Durable and UV resistant construction provide years of reliable use.
  •  For outdoor use only
  •  Watering provides full length, slow and steady flow
  •  For drip irrigation applications only
  •  Easy to install
  • Assembled Width (in.): 7.25 in
  • Assembled Depth (in.): 3.0 in
Florida
St. Petersburg
Blue Stripe 1/2 in. x 100 ft. Drip Tubing
Prices start at : 15.75 USD / each

The Toro Blue Stripe 1/2 in. It is UV resistant and has been consistently tested in agriculture and greenhouse applications. Drip Tubing is manufactured via a patented process with a 3-layer construction consisting of two strong outer layers and a muscular,...
  • Assembled Depth (in.): 17 in
  • Dimensions = .710 OD x .620 ID: Yes
  • Inner Diameter (in.): .62
  • Returnable: 90-Day
  • Outer Diameter (in.): .71
  • Assembled Height (in.): 4.5 in
Florida
St. Petersburg
1/4 in. x 500 ft. Micro Drip Tubing
Prices start at : 23.98 USD / each

The vinyl micro tubing is used in a wide range of drip irrigation layouts, including being used as feeder lines from the ½ in. Made of high quality vinyl, the micro tubing is flexible and relatively soft when compared to polyethylene micro tubing.
  • Irrigation System Component: Tubing
  • Outer Diameter (in.): 0.25
  • Use with 1/4 in. barbed fittings: Yes
  • Assembled Height (in.): 5.5 in
  • Assembled Depth (in.): 11 in
  • Pressure Rating: 60 psi
Florida
St. Petersburg
Maverick 2 GPH 12-Outlet Drip Manifold Kit
Prices start at : 12.5 USD / each

The DIG Maverick 12-outlet drip irrigation manifold kit provides a quick solution for saving water. Incorporating a Maverick drip manifold can save water while increasing your plants health by supplying water to where it is needed most, at the plants...
  •  Can be used with 1/4 in. drip-line, DIG model SH50
  •  Use with 1/8 in. or 1/4 in. micro tubing
  • Manufacturer Warranty: 3 Year Warranty
  • Color Family: Blacks
  • Kit Type: Drip Riser Kits
  • Package Quantity: 1
Florida
St. Petersburg
Faucet Connection Kit
Prices start at : 11.97 USD / each

This Rain Bird Faucet Connection Kit provides a simple method for connecting a drip irrigation system to an outdoor faucet. To automate your watering schedule, add a Rain Bird hose-end timer.
  •  Multi-function kit helps ensure the proper operation of your drip irrigation system
  •  Total Satisfaction Policy
  •  Connect half-inch drip tubing to an outdoor faucet or garden hose
  •  Easily attaches to any outdoor faucet or garden hose
  • Returnable: 90-Day
  • Color Family: Blacks
Florida
St. Petersburg
1/2 in. 0.700 O.D. Compression Tee
Prices start at : 0.98 USD / each

Made from durable, UV resistant materials for long life in the landscape. Poly tubing and create a strong, water tight seal without the use of glues or special tools. Easily connect 1/2 in.
  •  Resistance causes a compression seal that the water cannot penetrate
  •  Light and compact design
  • Outer Diameter (in.): .50
  • Fitting Type: Compression Fittings
  • Manufacturer Warranty: 3 Year Warranty
  • Pressure Rating: 60
Florida
St. Petersburg
1/2 in. 0.700 OD Compression Coupling (25-Pack)
Prices start at : 11.98 USD / each

Made from durable, UV resistant materials for long life in the landscape. Poly tubing and create a strong, water tight seal without the use of glues or special tools. Easily connect 1/2 in.
  •  Pack of 25
  •  Light and compact design
  • Manufacturer Warranty: 3 year
  • Outer Diameter (in.): 0.50
  • Product Width (in.): 10
  • Inner Diameter (in.): .50
Florida
St. Petersburg
180-Degree Half Circle Micro-Bubbler (4-Pack)
Prices start at : 4.97 USD / each

Ideal for shrub plantings, trees, containers and flower beds. Rain Bird Micro Bubblers provide adjustable, low-volume watering up to a 3 ft.
  •  Includes spike for easy plant placement
  •  Cap rotates to adjust coverage up to 3 ft. circle
  • Tubing Size: 1/4"
  • Color Family: Blacks
  • Product Height (in.): 7.5
  • Pressure Rating: 20 psi
Florida
St. Petersburg
Blue Stripe Drip 1/2 in. x 50 ft. Tubing
Prices start at : 13.36 USD / each

The Toro Blue Stripe 1/2 in. It is UV resistant and has been consistently tested in agriculture and greenhouse applications. Drip Tubing is manufactured via a patented process with a 3-layer construction consisting of two strong outer layers and a muscular,...
  •  Dimensions = 0.710 O.D. x 0.620 I.D.
  •  Conforms to A.S.A.E. standards for minimum inside diameter and wall thickness
  • Inner Diameter (in.): .62
  • Manufacturer Warranty: 1 YR
  • Returnable: 90-Day
  • Drip Line/Tubing Type: Drip or Emitter Line Tubing
Florida
St. Petersburg
6 in. x 1/2 in. x 3/4 in. Swing Pipe Assembly
Prices start at : 2.3 USD / each

The Rain Bird SA65 6 in. Textured surface makes product easier to handle, contributing to labor efficiency, especially under wet conditions. Swing Pipe Assembly is a flexible swing assembly that connects sprinkler heads to lateral pipes.
  • Drip Line/Tubing Type: Drip or Emitter Line Tubing
  • Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
  • Operating pressure: 80 psi: Yes
  • Pressure Rating: 80
  • Assembled Depth (in.): 6 in
  • Tubing Length (ft.): 6
Florida
St. Petersburg
24 VAC Powered Drip Zone Valve Assembly
Prices start at : 25.98 USD / each

The improved design Drip Zone Valve Assembly Kit provides installation simplicity with reliable performance and an affordable price to start a drip irrigation installation. DIG's 24VAC Drip Zone Valve Assembly Kit is a complete unit composed of a 3/4”,...
  •  Made from high quality, UV resistant materials
  •  No special tools or glue needed for installation
  •  The 155-mesh screen filter can easily be removed for cleaning
  •  Operating pressure: 10 to 100 PSI
  •  Used to automate a drip zone
  • Included: Filter,Pressure Regulator
Florida
St. Petersburg
3/4 in. x 1/2 in. FHT x MHT Hose Adapter
Prices start at : 1.98 USD / each

Hose and 1/2 in. FHT x MHT Hose Adapter in your drip or micro-irrigation system. Hose (not included). Install this 3/4 in. For drip or micro-irrigation applications. This will create a connection between 3/4 in.
  •  Black
  •  Allows connection of 3/4 in. hose and 1/2 in. hose (not included)
  •  70 psi pressure rating
  • Product Width (in.): 5.7
  • Returnable: 90-Day
  • Fitting Type: Compression Fittings,Universal Fittings
Florida
St. Petersburg
1 GPH Inline Dripper (10-Pack)
Prices start at : 2.66 USD / bag

To be used outdoors with cold water only. The dripper is best used when watering plants spaced 10-20 in. The Orbit 1 GPH Inline Dripper is utilized best in watering a specific landscape feature.

1

    • Manufacturer Warranty: None
    • Gallons per Hour: 1
    • Fitting is black in color: Yes
    • Tubing Size: 1/4"
    • Pressure Rating: 25 psi
    • Product Depth (in.): 1
    Florida
    St. Petersburg
    Vegetable Garden Drip Watering Kit
    Prices start at : 19.97 USD / each

    This kit comes with everything you need to set up your drip watering system. And can be expanded using additional raindrip products. The raindrip Vegetable Garden Drip Kit waters up to 50 ft.
    •  Easy to customize or expand your system; you can add additional tubing, feeder lines and fittings to fit your drip system to your landscape; or add our newly designed timer to make watering automatic and stop watering by hand while keeping your plants healthy even when you're on vacation
    •  Kit includes: 50 ft. of 1/4 in. pre-assembled tubing and 10 wire stakes
    •  2 simple steps are needed to install this kit: step 1 - connect to water source, step 2 - lay out the supply tubing - no need to add drippers or connectors because they are already pre-installed in the dripper line
    • Number of pieces included: 11
    • Irrigation System Component: Kit
    • Color Family: Browns / Tans
    Florida
    St. Petersburg
    2 GPH Flag Dripper (25-Pack)
    Prices start at : 5.24 USD / each

    The DIG 2 GPH Flag Drippers provide a reliable, point source irrigation solution for your drip system. Flag drippers offer the posted flow rate with a line pressure of 25 psi. Twist open flag top can be removed for easy cleaning.
    • Maximum Gallons Per Minute: 0.03
    • Color Family: Blacks
    • Spray Pattern Degrees: 360 Degrees
    • Manufacturer Warranty: 3 Year Warranty
    • Pressure rating of 25 psi: Yes
    • Product Width (in.): 4
    Florida
    St. Petersburg
    1/2 in. 0.700 O.D. Compression Coupling
    Prices start at : 0.92 USD / each

    Made from durable, UV resistant materials for long life in the landscape. Poly tubing and create a strong, water tight seal without the use of glues or special tools. Easily connect 1/2 in.
    • Returnable: 90-Day
    • Fitting Type: Compression Fittings
    • Drip Irrigation Fitting Type: Coupling
    • Product Length (in.): 1
    • Color Family: Blacks
    • Black fittings are 0.600 I.D. (inside diameter) x 0.700 O.D. (outside diameter): Yes
    Florida
    St. Petersburg
    Drip 1/4 in. Barbed On/Off Valve (2-Pack)
    Prices start at : 1.97 USD / each

    Easily adjust or shut off flow in 1/4 in. Avoid over or under-watering of plants with different moisture needs in a timed drip zone. Top cap turns to adjust flow. Drip tubing runs to different sections of your plant watering area.
    •  On/off or regulated flow
    •  2 pack - 1/4" Barbed Vavle for easy adjust or shut off
    • Connection: Barb x Barb
    • Material: Plastic
    • Drip Irrigation Fitting Type: Valve
    • Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
    Florida
    St. Petersburg
    Flower, Shrub and Tree Drip Watering Kit
    Prices start at : 53.32 USD / each

    The raindrip Flower, Shrub and Tree Kit waters up to 10 trees and hedges, as well as 30 plants or 20 shrubs and vines. Comes with everything you need to set up your drip watering system.
    •  Our patented clamp-N-pierce connector on all of the assembled feeder lines means there are no tools required - a simple push and it connects, pierces the tubing and is "drip ready"
    •  Kit includes: 50 ft. of 1/2 in. pre-assembled hose, a filter/regulator combo, timer, "Y" valve, 5 wire stakes, 10 hole plugs, an end plug, a universal "T", 10 pre-assembled 2 GPH feeder lines, 10 plastic stakes
    • Manufacturer Warranty: 2 YEAR LIMITED
    • Kit Type: Drip Irrigation Kit
    • Irrigation System Component: Kit
    • Package Quantity: 1
    Florida
    St. Petersburg
    1/2 in. Pipe Thread Adapter with Riser
    Prices start at : 1.28 USD / each

    Accommodates most all threaded emitters. Pipe Thread Adapter can help adapt your sprinkler risers into water-efficient low-volume irrigation systems. Connect the male pipe thread with semi-rigid riser into the FNPT and thread or insert the micro sprinkler,...
    • Manufacturer Warranty: 3 Year Warranty
    • Outer Diameter (in.): .50
    • Material: ABS Plastic
    • Product Height (in.): 8.25
    • No special tools or glues necessary: Yes
    • Drip Irrigation Fitting Type: Adapter
    Florida
    St. Petersburg
    0-2 GPM Flood Bubbler with Fully Adjustable, Full Circle
    Prices start at : 0.97 USD / each

    The Toro Flood Bubbler has a full circle pattern for slow, deep watering around trees, shrubs, and vegetable gardens. NPT riser for non-traffic areas. It is fully adjustable from off to 2 GPM and a 0 to 2-ft.
    •  Ideal for trees, shrubs, vegetable and flower gardens
    •  Removable filter screen
    • Product Length (in.): 0.017 in
    • Pressure Rating: 75 psi
    • Maximum Gallons Per Minute: 2
    • Tubing Size: 1/2"
    Florida
    St. Petersburg
    1/2 in. Easy-Fit Elbow
    Prices start at : 1.27 USD / each

    This Easy Fit 1/2 in. Elbow has a 1/2 in. Connection size. The elbow is designed to help you connect hose into your sprinkler and irrigation system.
    •  Easy-fit compression fittings accept any manufacturer's O.D. tubing from 0.630 in. to 0.700 in.
    •  Non-threaded
    •  Hose fitting
    • Outer Diameter (in.): .70
    • Drip Irrigation Fitting Type: Elbow
    • Color Family: Blacks
    Florida
    St. Petersburg
    Gro Potted Drip Kit
    Prices start at : 31.57 USD / each

    In just 3 simple steps you can save time, water and backache with hands-free, precision watering all season long. Perfect for pots, patios and planters, the Gro Potted Drip Kit provides a fully customizable system that allows you to set-up once and deliver...
    •  Kit includes everything you need to start precision watering
    •  Reduce wasted water
    •  Covers up to 8 pots or planters
    • Color Family: Blacks
    • Manufacturer Warranty: Satisfaction Guaranteed or your money back. If you are not satisfied, return the product and all pieces to Scotts Miracle-Gro Products, Inc. P.O. Box 606, Marysville, OH 43040 Limit: One product per family
    • Irrigation System Component: Kit
    Florida
    St. Petersburg
    1/4 in. x 50 ft. Poly Micro Drip Tubing
    Prices start at : 4.27 USD / each

    The DIG Corp 1/4 in. The durable tubing is UV resistant and can be laid either above or below ground. Vinyl Micro-tube is designed not to kink or crimp. It can be used either for extending drippers and micro-sprinklers from a main line or as the basis...
    •  May be laid above or below ground
    •  Use as a primary feeder line from a 1/2 in. poly-tube
    • Assembled Height (in.): 2.5 in
    • Assembled Depth (in.): 6 in
    • Drip Line/Tubing Type: Drip or Emitter Line Tubing
    • Returnable: 90-Day
    Florida
    St. Petersburg
    Quick Lock 3/4 in. FHT Adapter
    Prices start at : 6.26 USD / each

    Simple twist on/off design requires no tools for installation: thoroughly tighten 3/4 female pipe thread inlet to faucet or hose; insert tubing into quick lock outlet compression fitting and twist to complete.
    •  No tool installation
    •  Accepts Rain Bird and all other brands of .700 outside Dia drip irrigation tubing
    •  Quickly connects .700 in. outside Dia Drip irrigation tubing to 3/4 in. faucet or garden hose
    •  Durable, leak-resistant connection stays in place season after season
    • Outer Diameter (in.): .5
    • Product Length (in.): 1.0 in
    Florida
    St. Petersburg
    Blue Stripe Drip Turbo SC Plus Emitters (6-Pack)
    Prices start at : 3.37 USD / each

    Additionally, the emitters feature a pressure-compensating diaphragm. These emitters can be used with Blue Stripe Drip 1/4 in. Toro Blue Stripe Drip Turbo SC Plus Emitters (6-Pack) are ideal for individual plants and have a self-flushing mode that clears...
    •  Durable construction works well in most water conditions
    •  Great for individual plants, shrubs and trees
    • Spray Pattern: Drip
    • Maximum Gallons Per Minute: 2.0
    • Dripper Type: Pressure Compensating
    • Tubing Size: Fits All Tubing Sizes
    Florida
    St. Petersburg
    1/4 in. x 100 ft. Blue Stripe Drip Tubing with Emitters
    Prices start at : 20.49 USD / each

    Use it with other Blue Stripe Drip products to create a custom irrigation layout that is specific to your landscape or garden. The Toro Blue Stripe Drip 1/4 in. Tubing with Emitters is a professional-quality drip hose made of high-quality polyethylene.
    •  1/2 gallon per hour (GPH) emitters every 6 in. are factory-installed for uniform water distribution
    •  Factory-installed emitters cut installation time
    • Manufacturer Warranty: 1 year
    • Color Family: Blacks
    • Inner Diameter (in.): .170
    • Assembled Height (in.): 2.7 in
    Florida
    St. Petersburg