Watering Irrigation Drip Irrigation Tubing For Sale In Rhode Island

0.25

• ✓ Low density polyethylene construction
• ✓ Designed not to kink or crimp

• Assembled Width (in.): 6 in
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Outer Diameter (in.): 0.25
• Inner Diameter (in.): 0.25

• ✓ 50 ft. drip soaker ideal for watering planters and small plants in rows and borders
• ✓ Made in USA

• Assembled Width (in.): 6 in
• Manufacturer Warranty: Limited Lifetime
• Color Family: Blacks
• Outer Diameter (in.): 0.25

• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
• ✓ Drip line produces a flow rate of 1 GPH per each drip emitter at 10 to 45 PSI

• Manufacturer Warranty: 3 Year Warranty
• Outer Diameter (in.): .50
• Pressure Rating: 50 psi
• Drip Line/Tubing Type: Porous Tubing

• ✓ Rugged and flexible, easy to unroll and stake in the garden, flower bed, ground cover or other landscaped areas
• ✓ 100 ft. coil with built-in pressure compensating emitters spaced every 18 in.
• ✓ UV resistant
• ✓ Easy to unroll and stake in a garden, flower bed, or other landscape areas
• ✓ Connect with Rain Bird 1/2 in. barbed or easy-fit compression fittings

• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• ✓ 100 of coverage with 1-GPH drippers every 12 in. with total of 100-drippers
• ✓ Reduced clogging due to large drip emitter labyrinth water passage
• ✓ Ideal for installation on difficult terrain such as on slopes, in oddly shaped areas and on windy sites
• ✓ Operating pressure range: 10 to 45 PSI
• ✓ Designed for placement in both new and existing landscape areas including green-roof areas

• Tubing Length (ft.): 100

0.5

• ✓ Easy to use and install
• ✓ Elbow is made for convenient installation and maintenance
• ✓ Works with 1/2 in. Orbit, 5/8 in. Raindrip, Toro Blue Stripe and 1/2 in. DIG

• Inner Diameter (in.): 0.5
• Outer Diameter (in.): 0.5
• Drip Irrigation Fitting Type: Elbow

0.5

• ✓ 1/2 in. fitting
• ✓ For use with drip irrigation

• Inner Diameter (in.): 0.5
• Outer Diameter (in.): 0.5
• Manufacturer Warranty: 1 Year Limited
• Product Height (in.): 2.375

• Manufacturer Warranty: 3 Year warranty
• Color Family: Blacks
• Number of pieces included: 162
• Irrigation System Component: Kit
• Kit Type: Drip Irrigation Kit
• Drip irrigation maintenance and repair expansion bucket features DIG's versatile, color-coded, pressure-compensating drippers in 3 flow rates (1, 2, and 4 GPH) to efficiently repair, add to, or modify your exiting drip system; the kit is economically priced well below the cost of the individual parts combined: Yes

• ✓ Includes 1 GPH and 2 GPH emitters to customize flow
• ✓ Includes (3) 1 GPH and (3) 2 GPH drip emitters to allow you to vary flow to each plant
• ✓ Converts all pop-up sprinklers with a 1/2 in. threaded bottom inlet
• ✓ Conserve water and save money by watering your plants directly with drip irrigation

• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Number of pieces included: 15

• ✓ Allows creating a custom layout for your planting area
• ✓ Barbed end can also be inserted directly into the side of 1/2 in. drip tubing to extend flow to individual plants with 1/4 in. tubing
• ✓ Fast, easy and convenient installation
• ✓ Working pressure rated from 0-50 PSI

• Returnable: 90-Day
• Product Height (in.): 1

• Product Height (in.): 5
• Drip Irrigation Fitting Type: Tee
• Product Width (in.): 3.5
• Disassembles easily for maintenance: Yes
• Manufacturer Warranty: 3 year
• Product Length (in.): 1.5

• ✓ Bleed function allows you to flush any debris from system
• ✓ Compatible with any timer, faucet, and garden hose
• ✓ Pressure regulator helps provide even and consistent water flow throughout the entire system
• ✓ Slow and even water flow (0.35 Gallons per hour per dripper) reduces water waste up to 70% while providing sufficient hydration for your plants

• Number of pieces included: 46
• Irrigation System Component: Kit

• Drip Irrigation Fitting Type: Tee
• Outer Diameter (in.): .50
• No special tools or glues needed: Yes
• Color Family: Blacks
• Pressure Rating: 60
• Material: ABS Plastic

• ✓ Twist head to increase and decrease the flow
• ✓ Recommended spacing: 1 per plant
• ✓ Provides a flow rate of 0 - 30 GPH
• ✓ Filter requirement: minimum of 120 mesh

• Irrigation System Component: Drip Irrigation Emitter
• Pressure Rating: 25 PSI

• ✓ Includes 1/4 in. barb connector for securing 1/4 in. micro tubing to 1/2 in. poly tubing
• ✓ Multiple streams provide 180 degree coverage
• ✓ Recommended operating pressure: 25 psi with flow rate of 14.1 GPH (use with model D46 25 psi pressure regulator)
• ✓ Dripper head can be removed for easy cleaning

• Package Quantity: 5
• Gallons per Hour: Adjustable

• Returnable: 90-Day
• Connection: Barb x Barb x Barb
• Fitting Type: Barb Fittings
• Color Family: Blacks
• Product Height (in.): 5.5
• Drip Irrigation Fitting Type: Tee

• ✓ Ideal for smaller drip irrigation systems
• ✓ 25 psi suggested operating pressure

• Material: ABS Plastic
• Product Height (in.): 5.5
• Connection: FHT x MHT
• Inner Diameter (in.): .75

• ✓ Barbed ends for insertion into 1/2 in. or 5/8 in. drip irrigation tubing
• ✓ Barbed ends for insertion into 1/2" or 5/8" drip tubing

• Returnable: 90-Day
• Product Length (in.): 1.5
• Inner Diameter (in.): .63
• Package Quantity: 1

• ✓ All DIG compression fittings with black insert fit polyethylene drip tubing with .690 O.D., .700 O.D., .704 O.D. and brown PC drip line
• ✓ Glues onto 1/2 in. PVC
• ✓ Non-threaded, PVC slip connection

• Drip Irrigation Fitting Type: Coupling
• Fitting Type: Compression Fittings
• Material: ABS Plastic

• ✓ For non-mainline cold water outdoor irrigation connections only
• ✓ Use to build and maintain a sprinkler system
• ✓ Push-and-go design creates a secure, leak-resistant connection with no clamping, gluing or waiting
• ✓ Use only with Eco-Lock pipe

• Tubing Length (ft.): 100
• Assembled Depth (in.): 16.0 in

• Maximum Gallons Per Minute: .2
• Connects underground flexible 1/4 in. drip irrigation tubing: Yes
• Spray Pattern Degrees: Full Circle
• Features: Retraction Spring
• Product Height (in.): 7.5
• Tubing Size: 1/4"

• ✓ Four 1/4 in. barbed ports with threaded caps
• ✓ One 1/4 in. barbed port
• ✓ Includes easy access filter
• ✓ Connects to a 1/2 in. threaded riser

• Inner Diameter (in.): 0.5
• Fitting Type: Drip Adapters

• ✓ Non-pressure compensating model
• ✓ 25-pack of drippers/emitters in convenient plastic bag

• Returnable: 90-Day
• Product Height (in.): 1
• Color Family: Blacks
• Maximum Gallons Per Minute: .03

• ✓ Includes backflow preventer so water does not re-enter the main water supply through siphoning
• ✓ Included drippers are pressure compensating (PC) providing consistent, uniform flow
• ✓ Covers up to 150 sq. ft. and can be easily expanded

• Included: Backflow Preventer,Pressure Regulator,Stakes,Tubing,Tubing Clips
• Number of pieces included: 51
• Returnable: 90-Day

• ✓ Dimensions = .710 OD x .620 ID
• ✓ Linear low-density polyethylene tubing is made from high-grade polyethylene resins
• ✓ Minimum 2% carbon black UV inhibitor added for resistance to sunlight deterioration

• Inner Diameter (in.): .62
• Outer Diameter (in.): .71
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ Large water passages and self-flushing action help prevent clogging
• ✓ Total satisfaction policy
• ✓ 10-pack of 2 gallon per hour dripper/emitters in convenient plastic bag
• ✓ Pressure-compensating to deliver same uniform flow rate from beginning to end of tubing runs
• ✓ Unique dripper/emitter features a built-in check valve to eliminate wasteful drainage on slopes

• Pressure Rating: 30 psi

• ✓ No special tools or glues needed
• ✓ Pack of 15

• Product Width (in.): 10
• Connection: Comp
• Fitting Type: Compression Fittings
• Product Length (in.): 10 in