Watering Irrigation Drip Irrigation Tubing For Sale In Rancho Cucamonga

• ✓ 100 ft. of tubing length
• ✓ Flexible design allows for ease of use

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Irrigation System Component: Tubing
• Assembled Width (in.): 6.5 in
• Inner Diameter (in.): 0.25

• ✓ For outdoor use only
• ✓ Easy to use and cut

• Outer Diameter (in.): 0.5
• Assembled Width (in.): 24 in
• Manufacturer Warranty: None
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ Easy to cut tubing
• ✓ For outdoor use only
• ✓ Easy to attach drip fittings

• Manufacturer Warranty: None
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Outer Diameter (in.): 0.25

• ✓ 2 simple steps are needed to install this kit: step 1 - connect to water source, step 2 - lay out the supply tubing - no need to add drippers or connectors because they are already pre-installed in the dripper line
• ✓ Kit has everything you need to get started with drip irrigation

• Package Quantity: 1
• Included: Garden Hose Connection,Stakes,Tubing
• Manufacturer Warranty: 2 year limited
• Returnable: 90-Day

• Color Family: Blacks
• Returnable: 90-Day
• Manufacturer Warranty: 3 Year Warranty
• Included: Backflow Preventer,Filter,Pressure Regulator,Stakes,Tubing
• 1 GPH flow rate from each dripper: Yes
• Package Quantity: 1

• ✓ Timer, pressure regulator and supply tubing are all threaded just like a hose, making it easy to hook up and start using your system
• ✓ Kit includes: 50 ft. of 1/2 in. pre-assembled hose, a filter/regulator combo, timer, "Y" valve, 5 wire stakes, 10 hole plugs, an end plug, a universal "T", 10 pre-assembled 2 GPH feeder lines, 10 plastic stakes

• Number of pieces included: 41
• Irrigation System Component: Kit
• Kit Type: Drip Irrigation Kit
• Package Quantity: 1

• ✓ Eliminate wasteful overspray and improve plant health while using less water
• ✓ Includes (3) 1 GPH and (3) 2 GPH drip emitters to allow you to vary flow to each plant
• ✓ The conversion head has a built-in pressure regulator and filter
• ✓ Converts all pop-up sprinklers with a 1/2 in. threaded bottom inlet

• Kit Type: Drip Irrigation Kit,Planters
• Returnable: 90-Day

• ✓ Use to build and maintain a sprinkler system
• ✓ For non-mainline cold water outdoor irrigation connections only
• ✓ Not for mainline use

• Manufacturer Warranty: None
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Outer Diameter (in.): 0.5

• ✓ Can be used around building foundations to maintain moisture in heavy soils to prevent slab damage
• ✓ Designed for new and existing landscapes, including difficult terrain such as slopes and oddly shaped areas

• Number of pieces included: 11
• Manufacturer Warranty: 3 Year Warranty
• Included: Pressure Regulator,Tubing,Tubing Clips
• Irrigation System Component: Kit

• ✓ Flow rate of 1 GPH operating pressure of 15 psi
• ✓ High-quality materials ensure a long life

• Returnable: 90-Day
• Dripper Type: Button
• Irrigation System Component: Drip Irrigation Emitter
• Package Quantity: 25

• Assembled Width (in.): 10.5 in
• Tubing Length (ft.): 100
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Manufacturer Warranty: 1 year
• Inner Diameter (in.): .170
• Dimensions = 0.250 O.D. x 0.170 I.D.: Yes

• ✓ Flexible tubing with UV-resistance
• ✓ Works with most new or existing drip systems.
• ✓ For drip irrigation applications only
• ✓ For outdoor use only
• ✓ Black in color

• Assembled Width (in.): 17.000 in

• ✓ For use on all manufacturers' NSF #80, #100, or #160 polyethylene pipe
• ✓ Friction loss is comparable to traditional insert fittings
• ✓ Suggested operating pressure is 10-80 PSI

• Outer Diameter (in.): 1.315
• Product Length (in.): 5.875
• Connection: Barb

• ✓ Made from high-quality durable materials
• ✓ Sprinkler still functions when reattached to top of adapter
• ✓ For use with all 1/4 in. micro tubing - poly or vinyl

• Color Family: Blacks
• Outer Diameter (in.): .50
• Product Length (in.): 1.5

• ✓ Reusable - loosen nut to remove tubing
• ✓ Works with 1/2 in. Orbit, 5/8 in. Raindrip, Toro Blue Stripe and 1/2 in. DIG

• Package Quantity: 1
• Outer Diameter (in.): 0.5
• Fitting Type: Drip Adapters
• Product Length (in.): 1.375

• ✓ Feel good about not wasting water
• ✓ Easy to install and use
• ✓ Kit includes a 3/4 in. back-flow device, 25 psi 3/4 in. preset pressure regulator, 3/4 in. swivel adapter, 200 ft. 1/2 in. drip irrigation hose and 50 ft. 1/4 in. micro tubing
• ✓ 11, 13” stakes assembly with micro tubing and barbs for use with micro sprayers

• Returnable: 90-Day
• Included: Backflow Preventer,Pressure Regulator,Tubing,Tubing Clips

• ✓ Quick tips; dip ends of tubing in warm water for a minute to soften up before inserting into fitting, and twist fitting onto tubing while inserting if necessary
• ✓ Accepts any manufacturer's O.D. tubing from 0.630" to 0.700"
• ✓ Hose fittings
• ✓ For drip applications

• Drip Irrigation Fitting Type: Tee
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• ✓ 2 pack - 1/4" Barbed Vavle for easy adjust or shut off
• ✓ Valve for use with 1/4" Drip irrigation tubing
• ✓ On/off or regulated flow

• Returnable: 90-Day
• Pressure Rating: 40
• Package Quantity: 2

• ✓ Can be used at the end of 1/4 in. tubing feeders, or can be inserted directly into 1/2 in., 5/8 in. or 3/4 in. RAINDRIP hose
• ✓ Can be buried and "ported" up to the surface with 1/4 in. tubing

• Gallons per Hour: 0.5
• Tubing Size: 1/4"
• Spray Pattern: Drip
• Package Quantity: 50

0.25

• ✓ Works with all brands of 1/4" drip tubing
• ✓ For drip irrigation applications only

• Inner Diameter (in.): 0.25
• Package Quantity: 25
• Outer Diameter (in.): 0.25
• Returnable: 90-Day

• ✓ For drip irrigation applications only
• ✓ Unique release feature simplifies installation and maintenance
• ✓ Works with 1/2" Orbit, 5/8" Raindrip, Toro Blue Stripe, 1/2" DIG and 1/2" Mister Landscaper Drip Tubing

• Fitting Type: Push to Connect Fittings
• Product Length (in.): 2.25
• Connection: Snap-on

• ✓ 360°, adjustable drip emitter mounted on 6 in. stake for easy installation
• ✓ Available in two models: Model BA1B (pack of 4) and B10B (pack of 10)
• ✓ Recommended operating pressure is 15 to 25 psi with adjustable flow from 0-14.1 GPH

• Spray Pattern: Adjustable
• Product Height (in.): 8
• Product Width (in.): 1.5

• Product Length (in.): 1.5
• Barbed ends for insertion into 1/2" or 5/8" drip tubing: Yes
• Pressure Rating: 40
• Fitting Type: Barb Fittings
• Outer Diameter (in.): .70
• Product Height (in.): 3

• ✓ 3/4 in. male pipe thread inlet and outlet
• ✓ For drip irrigation applications
• ✓ For cold water use only
• ✓ Easy to install

• Outlet Thread Type: MHT
• Returnable: 90-Day

• Slow watering rate allows soil to absorb water more completely in the root zones of plants: Yes
• Spray Pattern: Drip
• Dripper Type: Pressure Compensating
• Product Depth (in.): 0.75
• Tubing Size: Fits All Tubing Sizes
• Gallons per Hour: 0.5

• ✓ Includes backflow preventer, 25 psi regulator and mesh filter
• ✓ Multi-function kit helps ensure the proper operation of your drip irrigation system
• ✓ Provides a simple connection method

• Outer Diameter (in.): .70
• Fitting Type: Compression Fittings
• Drip Irrigation Fitting Type: Adapter

• Universal nut lock system offers a tight fit regardless of the size of the tubing: Yes
• Package Quantity: 1
• Product Width (in.): 1.5
• Product Height (in.): 4
• Drip Irrigation Fitting Type: Coupling
• Material: Polypropylene