Watering Irrigation Drip Irrigation Tubing For Sale In North Las Vegas

• ✓ 3-layer Matrix technology for improved strength and flexibility
• ✓ Large inner diameter allows installation of long runs of tubing

• Manufacturer Warranty: 1 year
• Assembled Width (in.): 42 in
• Color Family: Blacks
• Pressure Rating: 1 to 60 psi

• ✓ Total satisfaction policy
• ✓ 0.63 in. O.D., 0.54 in. I.D.
• ✓ Copper shield technology naturally protects from root intrusion
• ✓ Combine up to five 50 ft. coils to extend your watering coverage up to 250 ft.

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Inner Diameter (in.): .60

• ✓ Conforms to strict ASAE standards for minimum inside diameter and wall thickness
• ✓ Designed for use with other Toro Blue Stripe Drip products

• Assembled Height (in.): 2.7 in
• Tubing Length (ft.): 100
• Inner Diameter (in.): .17
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ Use for groundcover, roses, shrubs, plantings in narrow areas or loops around trees.
• ✓ Total of 100 1 GPH PC drip emitters per 100 ft. of dripline
• ✓ Large labyrinth water passage and filter intake area in each dripper are continuously flushed by the water flow to reduce clogging
• ✓ 3-year warranty
• ✓ Can be covered with mulch and may used below or above the ground

• Returnable: 90-Day

• ✓ Black in color
• ✓ Easy to install

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Assembled Height (in.): 19.000 in
• Tubing Length (ft.): 50
• Irrigation System Component: Tubing

• ✓ Maximum recommended flow rate per each length of drip tubing is not to exceed 220 GPH (3.6 GPM)
• ✓ Produced using dow's 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays

• Tubing Length (ft.): 100
• Outer Diameter (in.): .50
• Assembled Height (in.): 5 in
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ Dimensions: 100 ft. with 0.620 ID x 0.710 OD
• ✓ Bending radius: 1.5 ft.
• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)

• Manufacturer Warranty: 3 year warranty
• Pressure Rating: 80
• Inner Diameter (in.): .50

• ✓ 2 simple steps are needed to install this kit: step 1 - connect to water source, step 2 - lay out the supply tubing - no need to add drippers or connectors because they are already pre-installed in the dripper line
• ✓ Kit includes: 50 ft. of 1/4 in. pre-assembled tubing and 10 wire stakes
• ✓ Easy to customize or expand your system; you can add additional tubing, feeder lines and fittings to fit your drip system to your landscape; or add our newly designed timer to make watering automatic and stop watering by hand while keeping your plants healthy even when you're on vacation

• Package Quantity: 1
• Color Family: Browns / Tans
• Returnable: 90-Day

1

• Product Width (in.): 1
• Package Quantity: 1
• Returnable: 90-Day
• Connection: Comp
• Outer Diameter (in.): .50
• No special tools or glues needed: Yes

• ✓ Light and compact design
• ✓ Easily installed

2.5

• Product Length (in.): 2.5
• Outer Diameter (in.): .50
• Product Height (in.): 2.5
• Manufacturer Warranty: 3 Year Warranty

• ✓ Includes easy access filter
• ✓ For outdoor use and cold water only

• Drip Irrigation Fitting Type: Adapter
• Inner Diameter (in.): 0.5
• Fitting Type: Drip Adapters
• Connection: Barb

• ✓ Made of high-quality material for long life in the landscape
• ✓ Pack of 25

• Manufacturer Warranty: 3 year
• Inner Diameter (in.): .50
• Fitting Type: Compression Fittings
• Material: ABS Plastic

• ✓ Non-threaded
• ✓ Barbed ends grab tubing for a secure leak-proof connection
• ✓ Helps add supplemental watering options to individual plants

• Pressure Rating: 0 to 50 psi
• Package Quantity: 4
• Outer Diameter (in.): .70

• ✓ For outdoor use only
• ✓ For cold water use only
• ✓ Easy to use

• Material: Plastic
• Inner Diameter (in.): 0.25
• Pressure Rating: 25 psi

• ✓ Built in check valve
• ✓ Easy installation
• ✓ Professional choice
• ✓ Great for gardens
• ✓ Allows for easy expansion of drip system
• ✓ Designed for use season after season

1

• Pressure Rating: 10-80 PSI
• Connection: Barb
• Maximum operating pressure: 80 PSI for #80 pipe, 100 PSI for #100 pipe, and 160 PSI for #160 pipe: Yes
• Inner Diameter (in.): 1
• Product Height (in.): 1
• Manufacturer Warranty: King Innovation products are guaranteed against faulty materials or workmanship for a period of one year from date of purchase. Contact factory for full warranty information

• ✓ For non-mainline cold water outdoor irrigation connections only
• ✓ Eco-lock material is environmentally friendly and recyclable
• ✓ Flexible construction for installation configurability and simplified maintenance
• ✓ Use to build and maintain a sprinkler system

• Tubing Length (ft.): 100
• Assembled Depth (in.): 16.0 in

• ✓ Maximum run length of 369 ft. can be achieved from a single water source at 45 PSI
• ✓ PC drip-line be used above or below ground

• Inner Diameter (in.): .50
• Assembled Width (in.): 18 in
• Tubing Length (ft.): 100
• Pressure Rating: 50 psi

• ✓ Saves water by delivering water right where it is needed most, at the plant root zone
• ✓ Easily installed, simple do-it-yourself project

• Number of pieces included: 51
• Color Family: Blacks
• Returnable: 90-Day
• Included: Backflow Preventer,Pressure Regulator,Stakes,Tubing,Tubing Clips

• Color Family: Blacks
• Dripper Type: Flag
• Maximum Gallons Per Minute: 0.06
• Manufacturer Warranty: 3 Year Warranty
• Irrigation System Component: Drip Irrigation Emitter
• Returnable: 90-Day

.25

• Fitting Type: Barb Fittings
• Material: ABS Plastic
• Inner Diameter (in.): .25
• Outer Diameter (in.): .25
• Pressure Rating: 30
• Contains UV inhibitors to protect against direct sun exposure: Yes

• ✓ Quick and easy to install
• ✓ Made from high-quality materials for long life in the landscape

• Pressure Rating: 60
• Inner Diameter (in.): .75
• Drip Irrigation Fitting Type: Adapter
• Product Height (in.): 2.75

• ✓ Slips easily into pipe without the need for tools, clamps, or extra fittings
• ✓ Maximum operating pressure: 80 PSI for #80 pipe, 100 PSI for #100 pipe, and 160 PSI for #160 pipe
• ✓ Burst pressure exceeds 400 PSI; however, this product is not intended to be used on main lines or under constant pressure

• Connection: Male Pipe Thread
• Package Quantity: 25
• Fitting Type: Push to Connect Fittings

• Package Quantity: 1
• Color Family: Blacks
• Product Width (in.): 3.375
• Inner Diameter (in.): 0.5
• For drip irrigation applications only: Yes
• Pressure Rating: 80

• ✓ The conversion head has a built-in pressure regulator and filter
• ✓ Comes with everything you need to convert a sprinkler head or ½ in. riser to 6 drippers for watering shrubs and landscaping
• ✓ Includes (3) 1 GPH and (3) 2 GPH drip emitters to allow you to vary flow to each plant

• Returnable: 90-Day
• Package Quantity: 15
• Color Family: Blacks

• ✓ Works with all brands of 1/4 in. drip tubing
• ✓ For cold water use only
• ✓ Black in color
• ✓ For use with 1/4 in. distribution or soaker tubing

• Product Width (in.): 3.500 in
• Material: Poly

• Pressure Rating: 60
• Spray Pattern: Drip
• Product Width (in.): 4
• Package Quantity: 50
• Manufacturer Warranty: Limited Lifetime
• Can be buried and ported up to the surface with 1/4 in. tubing: Yes