Watering Irrigation Drip Irrigation Tools Accessories For Sale In St Paul

The Blazing Saddle Swing Pipe Barb is for use with 3/4 in. This saddle is ideal for both contractors and DIY. Simply clamp, push down, twist, and you are done. The easiest way to a secure fit without any tools.

This spike assists in optimizing a sprayer's wetting area over foliage. Universal Sprinkler Spike with Flow Control to raise your spray jet or fogger above the ground. This spike features flow control with the ability to adjust water flow rates to the...

Galvanized Tubing Holder is an ideal accessory for holding poly tubing in its place on the ground. The DIG 1/2 in. Galvanized to provide a sturdy, rust-proof tubing stake. When laying out your drip irrigation systems mainline, it is important to secure...

These hose fittings help you maintain your sprinkler and irrigation system. Closure Goof Plugs (30-Pack) are 1/4 in.

The Toro Blue Stripe Drip 1/2 in. Can be removed and reused for drip system modification or expansion. Figure 8 End Clamps (4-Pack) are designed to provide a strong grip but can be removed and reused for your convenience.

The Rain Bird EC50 1/2 in. Used with 1/2 in. Emitter tubing to allow for easy flushing and draining of the system. Tubing or 1/2 in. End Closure is used to close a drip line system without the need of cutting the tubing which can later on be used to extend...

No need to compromise your sprinkler system performance to accommodate drip irrigation applications. Use in conjunction with drippers, micro sprinklers, or other low-volume emitters for large containers, pots or individual plants and trees.

Micro tubing, soaker hose or drip-line. Barbed Tee is used to provide a secure connection of three pieces of 1/4 in. Each connection offers raised barbed ends to ensure a strong, water tight fit.

King Innovation's SnapTap pipe saddles are number one in their class for speed, comfort and durability. Available with an FPT, 90° elbow, or straight barb fitting. The patented cutting tip allows the installer to pierce through pipe quickly, while the...

Simply connect the Barbed Valve into any type if 1/4 in. Would you like to control the water flow to plants or shrubs in your Micro Drip, now you can will the Barbed Shut-off Valve.

The DIG Maverick 12-outlet drip irrigation manifold kit provides a quick solution for saving water. Incorporating a Maverick drip manifold can save water while increasing your plants health by supplying water to where it is needed most, at the plants...

Lightly spray water over surrounding flowers by extending the riser to a 20 in. Riser fits perfectly within a garden or flowerbed. The decorative design of the Orbit 12 in. Sprinkler Stake with 12 in.

Never drag around the hose or a heavy watering can again. Perfect for raised beds and gardens, the Gro Garden Sprayer Kit provides a network of adjustable sprayer heads to make sure that, from root to canopy, everyone is covered.

The DIG Corp Adjustable-Flow Bubbler on Spike provides controlled watering feature to accommodate a variety of different plants within your system. As your plants grow the flow can be increased as they require additional water to flourish.

Rain Bird drippers are made to the highest standard. Great for a new install, or if you are retrofitting an existing system. Giving the user the flexibility to use them in many climates.

Not recommended for securing ¼ in. Micro tubing with emitter near the plant, inside pots or baskets. Micro tubing stake is used to secure and stabilize the ¼ in. Poly or vinyl micro tubing.

It is 6 inches long and rated at 1-29 GPH at 25 psi. Adjustable to vary spray distances from 1 to 6 ft. For outdoor use and cold water only. This low volume bubbler is ideal for watering shrubs and potted plants.

The Toro 1/4 in. The pieces are made of durable materials. Drip Emitter and Fittings Kit includes the pieces that you need to water container plants or a small bed from an outdoor faucet.

Cut, connect and secure tubing and emitters to individual plants. The couplings facilitate a fast and convenient installation. Barbed Couplings (4-Pack) are used to connect 2 pieces of 1/2 in.

Easily convert a sprinkler riser to a 12-outlet drip system. 12-outlet drip irrigation manifold provides a quick solution for saving water. Incorporating a Maverick drip manifold can save water while increasing your plants health by supplying water to...

Drip tubing, or you can extend the drippers into the plants with 1/4 in. Micro tubing or distribution tubing. We do not recommend extending 1/4 in. Micro tubing from the button drip emitter nipple to the plant area.

This easy-to-push-on 90° Elbow works with the most common sizes of 1/2 in. It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance.

Prevents outside water from siphoning through an outside faucet. To be used outdoors with cold water only. This prevents drinking water contamination.

The Blazing Saddle Swing Pipe Barb is for use with 1 in. This saddle is ideal for both contractors and DIY. Simply clamp, push down, twist, and you are done. The easiest way to a secure fit without any tools.

Easily installed by snapping directly into 1/2 in. These DIG Corp 6 in. Raising the height to an effective 6 in. Sprinkler Risers are ideal for elevating jet sprayers, foggers or threaded micro sprinklers.

Designed for use with your sprinkler and irrigation system. Tubing Stakes (10-Pack) make quick and easy work of irrigation system installation. The stakes are 1/4 in.

Easily threads on a 1/4 in. The control knob adjusts water flow and spray distance. Riser or sprinkler stake. This low volume sprinkler head is an efficient and gentle way to water flower beds.