Watering Irrigation Drip Irrigation Tools Accessories For Sale In Saskatchewan

The filter has a pressure rating of 40 psi. The 40 psi Pressure-Regulating Filter helps maintain drip and micro-irrigation systems. Also has a 1 in. MPT fitting size.

Use the pressure regulator on any irrigation system that needs a lower pressure. Adjusting pressure: To adjust the pressure, turn the off, remove the colored cap from the top of the pressure regulator and use a screwdriver to turn the screw under the...

Hose Thread Screen Filter. Remove dirt and particles from your irrigation system with the DIG 3/4 in. Protects drippers and micro sprinklers from clogging. Inner filter can be easily removed for cleaning.

Distribution or soaker tubing in place. Durable construction provides years of reliable use. Use this stake to hold 1/2 in. Works with most different kinds of drip tubing.

By applying a small amount of pressure, a perfectly sized hole is created in 1/2 in. Barbed drippers or fittings can then be inserted into the 1/2 in. The tubing punch tool is indispensable to the drip installation process.

This product punches holes in the hoses so that emitters can be installed. Use the Toro Blue Stripe Drip Hose Punch in irrigation applications with Blue Stripe Drip 1/2 in.

The mesh filter is easy to remove for cleaning. This filter is designed specifically for drip watering systems. Removing debris from the water supply minimizes clogging in drippers and spray nozzles.

Stakes (10-Pack) are used to position your 1/4 in. The Toro Blue Stripe 1/4 in. Irrigation drip tubing just about anywhere. Just slide the stake over tubing and anchor in ground.

For outdoor use with cold water only. The Orbit 25 psi Faucet Regulator keeps water pressure to 25 psi. This reduces high pressure damage and drip system failure.

Poly tubing and create a strong, water tight seal without the use of glues or special tools. Easily connect 1/2 in. Ideal for repairing or expanding your drip irrigation system. Made from durable, UV resistant materials for long life in the landscape.

These non-threaded couplings deliver an easy fit for quick installation. Set up your sprinkler and irrigation system with these Easy Fit Couplings (2-Pack). Designed to connect hoses.

X Swing Pipe Barb End of Line is the easiest way to connect Polyethylene pipe for irrigation systems. The Blazing Fast Fittings 1 in. This line of Clampless fittings require no tools or extra fittings to install.

Use this DIG hole punch to punch holes in 1/2 in. Poly tubing main line to 1/4 in. This hole punch allows for a connection from the 1/2 in. Also used as a punch for the insertion of drippers or micro sprinklers into the main line.

Long Galvanized Wire Stake for 1/4 in. The extended bend design prevents movement of tubing while accepting all brands and sizes of 1/4 in. Corrosion-resistant galvanized stake secures 1/4 in.

Great for a new install, or if you are retrofitting an existing system. Rain Bird drippers are made to the highest standard. Giving the user the flexibility to use them in many climates.

Included is a 60-mesh screen to help filter out water impurities. The DIG 3/4 in. Compression Fitting enables the connection of micro tubing to any 3/4 in. Installing the micro tubing into the compression fitting provides a secure, water tight fit without...

The versatility of the Gro Garden Sprinkler Kit can help you save water and time versus hand-watering. With the Gro Garden Sprinkler Kit you're just 3 simple steps away from a whole season of hassle-free watering.

Barbed fittings feature a double barb design for increased grip and durability. Tubing to your 1/2 in. Orbit's 1/4 in. Use to adapt 1/4 in. The oversized finger tabs allow for easier installation.

Designed for use in your sprinkler and irrigation system. Barbed Tees (10-Pack) help you connect together pieces of hose. These tees are non-threaded and barbed.

Poly tubing to 1/2 in. Poly tubing is inserted easily into the compression side without the need for glue or special tools. DIG's D48 makes it simple to connect a 1/2 in. Great for use in conjunction with your in-ground irrigation system.

Stabilizer Stakes to help keep your irrigation micro tubing in place. Use the DIG 6 in. These stakes lift emitters and foggers above the soil line to maximize the wetting diameter.

With this dripper we highly recommended adding a 3/4 in. Micro tubing from the button drip emitter nipple to the plant area. Drip tubing, or you can extend the drippers into the plants with 1/4 in.

Works exclusively with the FlowerHouse Solar RainMaker. FlowerHouse Solar RainMaker replacement kit/extension kit is designed to supply all the tubing, water emitters/drippers, fittings and ground stakes to re-arrange your watering needs for a new season.

Installation suggestions: 1. Swivel adapter or garden hose with female hose thread only. Male thread (NPT) sprinkler riser into a ¾ in. Male hose thread any fitting, ¾ in. Do not over tighten.

Also available in: 0.5, and 1.0 GPH flow rates to customize watering of varying plant types and sizes. Convenient plastic bag contains (10) red-colored emitters. Rain Bird's pressure-compensating design ensures all plants receive the desired watering...

The 4 in 1 Universal cut and punch tool cuts tubing, inserts and removes drippers and inserts 1/4 in. The special tool works on any size tubing. It also saves time and wear and tear on your hands.

Measures 6-1/2 in. Contains 5 pieces per bag. High and is compatible with 1/4 in. Additionally, this micro-bubbler features a convenient adjustable-flow design. The Toro Blue Stripe Bubbler is ideal for small trees and shrubs whose growth requires increasing...