Watering Irrigation Drip Irrigation Tools Accessories For Sale In Richmond

Available with an FPT, 90° elbow, or straight barb fitting. King Innovation's SnapTap pipe saddles are number one in their class for speed, comfort and durability. The patented cutting tip allows the installer to pierce through pipe quickly, while the...

Protects drippers and micro sprinklers from clogging. Inner filter can be easily removed for cleaning. Remove dirt and particles from your irrigation system with the DIG 3/4 in.

The stake holds spray devices above plants. This way, the spray achieves good water coverage. Polyflex Riser Stake helps you apply water like a spray head on an underground system.

The main feature of the tool is tubing cutter that can easily punches hole in the drip tubing and then use the side of the toll to insert drippers or barbs fittings into the drip tubing or micro tubing.

Available with an FPT, 90° elbow, or straight barb fitting. King Innovation's SnapTap pipe saddles are number one in their class for speed, comfort and durability. The patented cutting tip allows the installer to pierce through pipe quickly, while the...

The mesh filter is easy to remove for cleaning. This filter is designed specifically for drip watering systems. Removing debris from the water supply minimizes clogging in drippers and spray nozzles.

Includes a sturdy 8 in. Tubing with barbed fitting for quick attachment to 1/2 in. Apply drip watering efficiency in more places around your landscaping with this adjustable staked riser for use with threaded drippers, bubblers and micro sprays.

The easiest way to a secure fit without any tools. Simply clamp, push down, twist, and you are done. This saddle is ideal for both contractors and DIY. The Blazing Saddle Swing Pipe Barb is for use with 1-1/4 in.

These hose fittings help you maintain your sprinkler and irrigation system. Closure Goof Plugs (30-Pack) are 1/4 in.

Facilitates a fast, convenient installation. This Tubing Cutter helps you size tubing to meet the unique needs of your sprinkler and irrigation system. This non-threaded cutter prepares tubes for connection.

They help conserve up to 50% of your outdoor water use by avoiding water loss to evaporation and run-off. The stakes also allow you to aerate and fertilize the roots and soil of your plants.

Allows for easy flushing of your system to keep your emitters clog free. Installed and removed easily without the need for glues or special tools. Securely close off the end of 1/2 in.

FHT 25 psi Regulator is designed to connect to a standard hose bib. This regulator helps maintain optimum pressure and water flow to the drip line and emitters. Featuring a capacity of 20 GPM.

Ideal for repairing or expanding your drip irrigation system. Made from durable, UV resistant materials for long life in the landscape. Easily connect 1/2 in. Poly tubing and create a strong, water tight seal without the use of glues or special tools.

Use for continuing lengths of micro tubing or to extend a micro tubing from the poly tubing. Each connection offers raised barbed ends to ensure a strong, water tight fit. Micro tubing, soaker hose or drip-line around sharp corners.

Tubing Holder is an ideal accessory for holding poly tubing in its place on the ground. Ridges on the top of the add grip when using your foot to inserting the stake into the soil.

Poly tubing or drip line. Each connection offers dual barbed ends to ensure a strong, water tight fit. The DIG 1/2 in. Barb Connector is used to provide a secure connection of two pieces of 1/2 in.

Toro Blue Stripe Drip Emitters (5-Pack) incorporate a flow and adjustment system that fine-tunes the flow of water from a gentle stream to a slow drip or shuts it off completely. These emitters feature a full-circle pattern and an adjustable throw distance...

It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance. This easy-to-push-on Coupling works with the most common sizes of 1/2 in.

Compression fitting provides a secure, water tight fit without the use of glue. The DIG Hose Thread Swivel Tee is designed to attached your drip irrigation system to a hose thread outlet.

Using additional drip hose, drip emitters and micro sprayers to a total flow rate of up to 220 GPH. And can accommodate expansion of up to 1000 sq. The kit can cover up to 700 sq. This kit is ideal for use in gardens planted with roses, shrubs, ground...

Tubing or inserted into the side wall of 1/2 in. Distribution tubing. 5.0 gph (gallons per hour) emitters are ideal for supplemental watering of individual plants. They can be used in-line with 1/4 in.

This product punches holes in the hoses so that emitters can be installed. Use the Toro Blue Stripe Drip Hose Punch in irrigation applications with Blue Stripe Drip 1/2 in.

Installs easily with barbed inlet and outlet, providing a water tight seal without the need for glue. Turn valve 90° to stop the flow of water. The DIG 1/4 in. In-Line Shut-Off Valve is to allow full control to turn on or off the flow of 1/4 in.

Tubing or 1/2 in. Emitter tubing to allow for easy flushing and draining of the system. Used with 1/2 in. The Rain Bird EC50 1/2 in. End Closure is used to close a drip line system without the need of cutting the tubing which can later on be used to extend...

It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance. This easy-to-push-on Coupling works with the most common sizes of 1/2 in.

Compression fittings are a simple and secure way to assemble your drip irrigation system. Pipe thread outlet to start your drip irrigation system. Poly tubing compression fitting. Pipe thread connector by 1/2 in.