Watering Irrigation Drip Irrigation Tools Accessories For Sale In Baton Rouge

• ✓ Simple to install, no glue necessary
• ✓ Made from high quality, UV resistant materials

• Inlet Thread Type: FHT
• Package Quantity: 1
• Product Height (in.): 6
• Manufacturer Warranty: 3 Year Warranty

• ✓ Universal tool makes it easy to cut tubing, insert various components and remove them just as easily
• ✓ Exclusive combination design helps with any drip system set up and cuts down on the time it takes to complete the installation because everything is all in the same tool, no looking around for extra tools

• Product Depth (in.): 1.13
• Inner Diameter (in.): .00
• Manufacturer Warranty: Limited Lifetime
• Product Height (in.): 10

• Manufacturer Warranty: 3 Year Warranty
• Pressure Rating: 30
• No special tools or glue needed: Yes
• Product Width (in.): .4 in
• Fitting Type: Barb Fittings
• Material: ABS Plastic

2.25

• ✓ Easy to install
• ✓ For above or below ground installation
• ✓ Easy to use

• Product Depth (in.): 2.25
• Product Width (in.): 2.25
• Inlet Diameter (in.): 0.75

• ✓ Convenient package of 10
• ✓ Helps hold poly tubing on the ground

• Manufacturer Warranty: 3 year
• Color Family: Metallics
• Product Depth (in.): 0.5
• Product Width (in.): 3

• ✓ Shorter working height requires less digging
• ✓ Ergonomic handle with 50% more surface area cushions fingers and provides maximum comfort
• ✓ No tools, fittings or clamps required

• Product Width (in.): 2.5
• Outer Diameter (in.): 0
• Returnable: 90-Day

• ✓ Constructed of UV-resistant, durable plastic material to withstand the most adverse conditions
• ✓ Total flow rate for this kit: 32 GPH (.53 GPM)
• ✓ Poly tubing length and size: 100 ft. x 1/2 ft. with 0.600 ID x 0.700 OD
• ✓ Drip emitter flow rates: 0.5 GPH at 5 psi, 0.8 GPH at 10 psi and 1 GPH at 15 psi (nominal)

• Included: Filter,Pressure Regulator,Stakes
• Color Family: Blacks

• ✓ Use to close the end of 1/2 in. distribution tubing
• ✓ Easy to use

• Material: Plastic
• Package Quantity: 1
• Irrigation System Component: Cap
• Manufacturer Warranty: None

1

• Irrigation System Component: Irrigation Tool
• Returnable: 90-Day
• Color Family: Blacks
• Outer Diameter (in.): 1
• Reduces fatigue when setting up your system: Yes
• Inner Diameter (in.): 1

• ✓ Made from high quality, UV resistant materials
• ✓ Hold and supports most sizes of irrigation micro tubing

• Product Width (in.): 4
• Package Quantity: 10
• Color Family: Blacks
• Product Height (in.): 8

• Manufacturer Warranty: 3 Year Warranty
• Product Length (in.): 2.25 in
• Light and compact design: Yes
• Material: ABS Plastic
• Connection: Comp x Comp
• Color Family: Blacks

• ✓ The filter has a pressure rating of 40 psi
• ✓ Helps maintain drip and micro-irrigation systems
• ✓ UV resistant plastic for long life

• Gallons per Hour: Adjustable
• Product Height (in.): 6.6
• Irrigation System Component: Accessory

0.5

• Works with the most common sizes of 1/2 in. drip tubing (0.690, 0.700 and 0.710 O.D.): Yes
• Material: Plastic
• Product Length (in.): 2.25
• Product Width (in.): 1.75
• Inner Diameter (in.): 0.5
• Outer Diameter (in.): 0.5

• Returnable: 90-Day
• Made from high quality, UV resistant materials: Yes
• Product Depth (in.): 3
• Manufacturer Warranty: 3 Year Warranty
• Outlet Diameter (in.): 0.75
• Package Quantity: 1

• ✓ Universal coupling fitting connects two sections of any brand 1/4" Drip irrigation tubing in a straight line
• ✓ Self-piercing barbed end for insertion directly into the side of 1/2" or larger Drip tubing
• ✓ 1/4 in. connection size

• Returnable: 90-Day
• Fitting Type: Barb Fittings
• Outer Diameter (in.): .25

• ✓ Made in the USA
• ✓ 6 in. emitter spacing
• ✓ Covers 16 sq. ft. of garden per kit

• Returnable: 90-Day

• ✓ Regulate the pressure of your drip irrigation or microsprinklers
• ✓ No special tools or glues necessary
• ✓ Size:3/4 in. FHT (inlet) x 3/4 in. MHT (outlet)

• Product Height (in.): 6
• Maximum Inlet Pressure Allowed (psi): 100
• Color Family: Blacks

• ✓ Maximizes the circumference of the wetting area
• ✓ 8 in. spike with needle valve and 8 in. poly-riser
• ✓ Adjustable flow rate to sprinklers

• Package Quantity: 1
• Product Width (in.): 1.825
• Manufacturer Warranty: 3 Year Warranty

• ✓ Helps facilitate a fast and convenient installation
• ✓ Allows creation of a custom layout for your planting area
• ✓ Recommended for 0 to 50 PSI operating pressure
• ✓ Helps add supplemental watering options to individual plants

• Outer Diameter (in.): .7
• Fitting Type: Barb Fittings

• ✓ Easy to install
• ✓ Use to modify or expand a drip system

• Product Length (in.): 1.813
• Pressure Rating: 25 PSI
• Manufacturer Warranty: 1 year
• Drip Irrigation Fitting Type: Coupling

• ✓ Easy installation
• ✓ Uv resistant
• ✓ Designed for use season after season

• Product Depth (in.): 1 in
• Returnable: 90-Day
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• Drip Irrigation Fitting Type: Elbow
• Color Family: Blacks
• Package Quantity: 100
• Manufacturer Warranty: 3 Year Warranty
• Outer Diameter (in.): .25
• Inserts easily into 1/2 in. poly tubing and 1/4 in. micro tubing for a watertight fit: Yes

• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Accepts standard threaded drippers, bubblers and micro sprays: Yes
• Irrigation System Component: Riser
• Product Depth (in.): 2
• Product Height (in.): 15
• Package Quantity: 1

• ✓ Total satisfaction policy
• ✓ Barbed ends for use with 1/4" or 1/2" drip irrigation tubing
• ✓ Flag style dripper
• ✓ Constructed of highly durable UV and chemical-resistant materials to assure long life
• ✓ Non-pressure compensating

• Irrigation System Component: Drip Irrigation Emitter

• ✓ Promotes fast and healthy plant growth with up to 70% less water
• ✓ Can be used at the end of 1/4 in. tubing feeders, or can be inserted directly into 1/2 in., 5/8 in. or 3/4 in. RAINDRIP hose

• Product Height (in.): 7
• Tubing Size: 1/4"
• Product Depth (in.): 1.5
• Irrigation System Component: Drip Irrigation Emitter

• Pressure Rating: 30
• Product Width (in.): .25
• Fitting Type: Barb Fittings
• Returnable: 90-Day
• Connection: Barb x Barb x Barb
• Drip Irrigation Fitting Type: Tee

• ✓ No special tools or glue are needed
• ✓ 3/4 in. FHT x MHT pressure regulator: downstream pressure preset to 25 psi, PC drip emitter flow rate: 1 Gal. per hour (GPH) micro sprayer flow rate: 14 Gal. per hour (GPH), total flow rate for this kit: 120 GPH (2 GPM)
• ✓ Featured a hose end solar powered timer with large, easy-to-read LCD screen and simple, icon-based programming with weekly or cyclical programs, 4 start times per day, durations of up to 6 hours, program delay of up to 99 days, system off, manual operation, and a sensor wire connection to accept a rain sensor, the timer's manual irrigation cycle can be performed via the manual program button use to water roses, shrubs, groundcovers, flowerbeds and trees, ideal for hillsides
• ✓ Complete kit; covers up to 700 sq. ft. (can be easily expanded) contains 5 micro sprayer assemblies, 13 in. spike and micro tubing with barb, including three 360 Degree, four 180 Degree and four 90 Degree patterns, and 50 1-GPH PC button drip emitters, applies water at a very low application rate leading to less surface evaporation from leaves and soil, micro sprayers are useful as water remains in the upper soil layers where the roots are developing, offers flexibility in irrigation frequency and application rate leading to minimized surface compacting and runoff

• Color Family: Blacks
• Included: Backflow Preventer,Pressure Regulator,Timer,Tubing,Tubing Clips