Watering Irrigation Drip Irrigation Tools Accessories For Sale In Bakersfield

The pressure regulators, installed downstream of the valve or filter, offer exceptional pressure control and provide consistent outlet pressures over a wide range of incoming pressures up to 100 PSI.

MPT Drip Y-Filter is designed to remove debris from the water source, reducing clogged emitters and sprinkler nozzles. This convenient flush port allows filter cleaning without filter removal.

The DIG 1/2 in. Galvanized Tubing Holder is an ideal accessory for holding poly tubing in its place on the ground. Galvanized to provide a sturdy, rust-proof tubing stake. When laying out your drip irrigation systems mainline, it is important to secure...

Tubing Stakes (10-Pack) make quick and easy work of irrigation system installation. Designed for use with your sprinkler and irrigation system. The stakes are 1/4 in.

Polyethylene irrigation piping. The easiest way to a secure fit without any tools. The Blazing Saddle Swing Pipe Barb is for use with 1-1/4 in. Simply clamp, push down, twist, and you are done.

This reduces high pressure damage and drip system failure. For outdoor use with cold water only. The Orbit 25 psi Faucet Regulator keeps water pressure to 25 psi.

Tubing strap helpful addition to secure tubing in a neat and fashionable way. Easily attaches with use of hammer to secure drip 1/4 in. Tubing of all types. Useful on most surfaces found in garden.

The patented cutting tip allows the installer to pierce through pipe quickly, while the ergonomic handle allows for comfort. Available with an FPT, 90° elbow, or straight barb fitting.

Polyethylene irrigation piping. The easiest way to a secure fit without any tools. The Blazing Saddle Swing Pipe Barb is for use with 1 in. Simply clamp, push down, twist, and you are done.

The sharp, stainless steel blade easily cuts through poly, rubber, and plastic pipe without leaving burrs. It has an ergonomic grip for comfortable use and includes a spring handle and lock which reduce strain on your hand.

Both tools come with a comfortable grip and stay sharp, heat treated blade. The tools provide an efficient way to modify and customize your drip irrigation line. The Drip Cutter and Punch Tool Kit are ideal for any drip irrigation installation.

Tie-Down Stakes (10-Pack) will help you get the results you desire. These easy-to-install stakes help keep tubing right where you want it; making it perfect for your garden or landscape.

Tubing to 1/4 in. Barbed fittings where tubing can come off to excessive water pressure or heat. This universal clamp works with most new or drip systems. Use to secure 1/4 in.

Elbow (15-Pack) helps you to create a custom irrigation system by joining different lengths of 1/4 in. Since no glue or clamps are required, this product is easy to install. The Toro Blue Stripe 1/4 in.

Keep up to 10 of your potted plants lush and hydrated with this water conserving drip system. Everything is included for full installation, no gluing is required. Complete drip irrigation system ideal for watering pots or planter boxes.

Poly tubing and create a strong, water tight seal without the use of glues or special tools. Ideal for repairing or expanding your drip irrigation system. Made from durable, UV resistant materials for long life in the landscape.

Spike is used to secure and raise micro sprinklers above the landscape. Micro tubing or poly riser. This spike assists in optimizing a sprayer's reach over foliage and maximizing the circumference of the wetting area.

Simply clamp, push down, twist, and you are done. Polyethylene irrigation piping. This saddle is ideal for both contractors and DIY. The easiest way to a secure fit without any tools.

Simply clamp, push down, twist, and you are done. Polyethylene irrigation piping. This saddle is ideal for both contractors and DIY. The easiest way to a secure fit without any tools.

Everything is included for an easy installation and requires no special tools or glues. Used in conjunction with 1/4 in. The DIG 4-outlet drip manifold kit converts a 1/2 in sprinkler riser into a water conserving drip system.

Micro tubing stake is ideal in securing button or flag drip emitters at the end of 1/4 in. Micro tubing stake is used to secure and stabilize the ¼ in. Micro tubing with emitter near the plant, inside pots or baskets.

Compression End Cap. The end cap is used to periodically flush irrigation systems of dirt and other debris keeping them clog free. It is ideal to flush your system each time you install or replace drippers.

Polyethylene irrigation piping. The easiest way to a secure fit without any tools. The Blazing Saddle 1/2 FPT is for use with 1 in. Simply clamp, push down, twist, and you are done.

Tees (15-Pack) are easy to use and allow you to connect different lengths of Toro Blue Stripe 1/4 in. They can also be used to design a custom layout for your irrigation system. The Toro Blue Stripe Drip 1/4 in.

Poly tubing and create a strong, water tight seal without the use of glues or special tools. Ideal for repairing or expanding your drip irrigation system. Made from durable, UV resistant materials for long life in the landscape.

The End Cap Stake allows you to conclude a distribution line. It is best used in drip irrigation systems. When you want to deliver water to your drip system via an above ground garden hose, these sturdy stakes are the ideal mount for a drip manifold.

Barbed Elbows (4-Pack) are used to cut, connect and secure tubing and emitters to individual plants. The elbows facilitate a fast and convenient installation. Add supplemental watering to individual plants.