Watering Irrigation Drip Irrigation Kits For Sale In Palmdale

For proper operation of a drip irrigation system. Convert a Rain Bird 1800 series spray head or a 1/2 in. Riser to a drip zone. This all-in-1 unit includes a 200-mesh filter and 30 PSI pressure regulator.

DIG's 24VAC Drip Zone Valve Assembly Kit is a complete unit composed of a 3/4”, 24 VAC in-line valve with flow control and manual lever for on/off operation, 3/4” heavy duty filter with a 155-mesh screen (model D55), ¾”, 25 PSI preset pressure...

Easily repair tubing breaks using the pail's self-dispensing 250 ft. Coil of 1/4" tubing and assortment of fittings. The Rain Bird Drip Repair and Expansion Kit provides the most commonly needed drip devices and tubing in a handy pail you can use season...

Fittings, PC drippers, stakes, and 250 ft. Micro-tubing to help you keep your existing drip system maintained and operating at peak efficiency. The DB250 Drip Irrigation Maintenance and Repair Expansion Bucket is a fully loaded 162 piece kit that is used...

The Toro 1/4 in. The pieces are made of durable materials. Drip Emitter and Fittings Kit includes the pieces that you need to water container plants or a small bed from an outdoor faucet.

The kit includes all the parts needed to install a drip irrigation system to water roses, vines, shrubs or vegetables, starting from a raised rain barrel with a hose thread outlet or from a garden faucet using the included pressure regulator.

Use this Toro Blue Stripe Drip Zone Valve Kit to incorporate low-volume drip irrigation into your automatic system. The valve kit features built-in backflow prevention, a stainless-steel mesh filter to keep drip emitters clean, a pressure regulator to...

Made from durable, UV resistant materials for long life in the landscape. Easily connect 1/2 in. Poly tubing and create a strong, water tight seal without the use of glues or special tools.

This versatile hose-connected watering kit has everything you need to create a custom drip irrigation layout and apply regulated flow directly to the root zone of vegetable plants, shrubs and trees.

The Rain Bird Pop-Up Sprinkler to Drip Emitter Conversion Kit turns your sprinkler head into a 6-port drip emitter watering system. By applying water directly to the root zone of your plants, you eliminate wasteful overspray and improve plant health while...

The Elgo 25 Drippers Planter Kit is a water conserving drip system designed for potted plants on a patio, balcony or in a greenhouse. Supporting component hardware included. Water supply tube.

4 barbed ports for multiple applications and this manifold comes with a easy access filter. This easy to use manifold connects Drip watering to any existing irrigation system. Simply connect to an existing shrub head or a 1/2 in.

A great choice for your sprinkler and irrigation system, these 1/4 in. The tees have a barbed design and a 1/4 in. Barbed Tees (30-Pack) can be used as hose fittings.

For outdoor use and cold water only. This low volume bubbler is ideal for watering shrubs and potted plants. Adjustable to vary spray distances from 1 to 6 ft. It is 6 inches long and rated at 1-29 GPH at 25 psi.

Used to connect all brands of 1/4 in. For outdoor use and cold water only. Double barb design adds additional holding power. For use with 1/4 in. Distribution (or soaker) tubing. Distribution or soaker tubing.

This easy-to-push-on Coupling works with the most common sizes of 1/2 in. It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance.

DIG's PVC coupling is used to connect 1/2 in. The slip side the coupling is glued onto the end of 1/2 in. (.700 O.D.) poly tubing to 1/2 in. PVC pipe with PVC glue. By walking or wiggling the drip tubing back and forth into the fitting.

We do not recommend extending 1/4 in. DIG's Button Drippers feature labyrinth water flow paths that allow for a consistent flow rate from each dripper at an incoming pressure of 15 to 25 psi with higher discharge at higher pressures and lower discharge...

Accommodates most all threaded emitters. Pipe Thread Adapter can help adapt your sprinkler risers into water-efficient low-volume irrigation systems. Connect the male pipe thread with semi-rigid riser into the FNPT and thread or insert the micro sprinkler,...

The DIG Adjustable-Flow Multi-Stream Dripper offers controlled watering feature to accommodate a variety of different plants within your system. As your plants grow the flow can be increased as they require more water to flourish.

The DIG 360-Degree Adjustable Mini-Bubbler emits uniform umbrella streams to provide 360 degree irrigation coverage. Easily adjust the flow and saturation level by turning the head of the bubbler.

Stake plus 36 in. Throw, allowing you to direct water exactly where you need it in a wide variety of planting areas. Includes a sturdy 8-in. It is ideal for taller plants such as shrubs and bushes as well as for use in flower beds and ground cover where...

This kit contains everything you need to water up to 10 potted plants from a single faucet. If you have multiple containers, additional drippers can allow this system to water up to 30 containers.

The DIG 360° Adjustable Spray Jet offers a low-volume, water saving solution to water, trees flower beds and ground cover. Comes assembled comes with a adjustable spray jet, a 13 in.

DIG's SH50 drip line is an extremely versatile drip irrigation method that will save you time, water and money. Drip line has cylinder, labyrinth emitters inserted inside the tubing every 12 in.

Riser or sprinkler stake. This low volume sprinkler head is an efficient and gentle way to water flower beds. The control knob adjusts water flow and spray distance. Easily threads on a 1/4 in.

Route water in drip and micro irrigation systems with the DIG Corp. Each connection offers dual barbed ends to ensure a strong, water tight fit. Barbed outlets. Barbed Tubing Elbow.