Watering Irrigation Drip Irrigation Kits For Sale In Gilbert

The DIG Flower Bed Watering Kit is a complete system that is designed to be used to irrigate borders, planters, flower beds and under canopies. Low volume irrigation can show a significant reduction in water usage.

The Toro Blue Stripe Drip Starter Kit is great for watering containers, flower beds and plants. This all-in-one kit is designed to install to a standard faucet. Ideal for watering plants and containers.

The Rain Bird Pop-Up to Micro Bubbler Conversion Kit contains all components needed to convert a pop-up sprinkler head to a water-saving drip system with 6 adjustable micro bubblers.

Convert a Rain Bird 1800 series spray head or a 1/2 in. This all-in-1 unit includes a 200-mesh filter and 30 PSI pressure regulator. Riser to a drip zone. For proper operation of a drip irrigation system.

The raindrip Ground Cover and Flower Bed Kit waters up to 50 ft. It is ideal for all landscape, perennial and garden areas and creates excellent growth and plant health with little water.

DIG's PVC coupling is used to connect 1/2 in. PVC pipe with PVC glue. This adapter is primarily used to connect 1/2 in. The slip side the coupling is glued onto the end of 1/2 in. By walking or wiggling the drip tubing back and forth into the fitting.

Used to connect all brands of 1/4 in. Distribution or soaker tubing. For use with 1/4 in. Double barb design adds additional holding power. For outdoor use and cold water only. Distribution (or soaker) tubing.

Riser Adapter Tees (2-Pack) offer a fit that resists leakage. Use to retrofit an existing irrigation system from a 1/2 in. Hose, the Toro Blue Stripe Drip 1/2 in. Designed to join 2 lengths of Blue Stripe Drip 1/2 in.

This Rain Bird Faucet Connection Kit provides a simple method for connecting a drip irrigation system to an outdoor faucet. The kit includes a backflow preventer, 25 psi regulator and a mesh filter for dependable drip system performance.

Riser while still retaining the ability to have full flow to the sprinkler head. Micro tubing to a 1/2 in. No need to compromise your sprinkler system performance to accommodate drip irrigation applications.

Garden hose or hose thread to 1/2 in. Easily installed without the use of special tools or glues. Compression fitting provides a secure, water-tight fit. Female Hose Thread x 1/2 in.

The DIG 1/4 in. Micro tubing, soaker hose or drip-line. Barb Connector is used to provide a secure connection of two pieces of 1/4 in. Each connection offers raised barbed ends to ensure a strong, water tight fit.

Set up your sprinkler and irrigation system with these Easy Fit Couplings (2-Pack). Designed to connect hoses. These non-threaded couplings deliver an easy fit for quick installation.

This 1 GPH Flag dripper is ideal for spot watering trees and shrubs. The easy to remove top makes for easy cleaning.

Add some color and excitement to your drip irrigation system with Drip Pets. Great to get the kids involved with family and home improvement activities. Easily attach to the drip tube and instantly give your yard some pop.

RAINDRIP's turbulent flow PC (pressure compensating) drippers maintain their rated flow rate for 10 - 60 PSI inlet pressure. Can be used at the end of 1/4 in. More drippers on a single line increase versatility and decrease complexity.

The DIG Maverick 12-outlet drip irrigation manifold kit provides a quick solution for saving water. Includes 100 ft. Incorporating a Maverick drip manifold can save water while increasing your plants health by supplying water to where it is needed most,...

The DIG Hose Thread Swivel Tee is designed to attached your drip irrigation system to a hose thread outlet. Provides a split direction from your drip head assembly. Compression fitting provides a secure, water tight fit without the use of glue.

The Sediment Filter keeps your sprinklers clear of sediment and debris which can disrupt the flow of water to the sprinkler, hindering spray pattern. You can see the collected sediment through the clear cover to determine when the filter needs to be cleaned.

Multiple drippers can be placed on the same 1/4 in. Ideal for pots, baskets and containers with shorter lengths 1/4 in. Micro tubing line then circled around larger plants. DIG Inline Drippers have barbed inlets and outlets and are designed for use with...

With this dripper we highly recommended adding a 3/4 in. We do not recommend extending 1/4 in. Drip tubing, or you can extend the drippers into the plants with 1/4 in. The drippers can be installed by punching a hole into the 1/2 in.

The riser adjusts up to 18 in. This allows you to direct water exactly where you need it in a wide variety of planting areas. It is ideal for taller plants such as shrubs and bushes well as for use in flower beds and ground cover where you may want broader...

The innovative new PC-CV-1 pressure compensating drip emitter with special water saving feature to eliminate water drainage when the system is shut off is designed to produce a consistent flow rate over a wide range of pressures and to simplify the installation...

Connect two lengths of 1/4 in. Simple to insert by hand, or use the Rain Bird insertion tool ET-1PKS (purchased separately) for faster installation in larger projects. Drip tubing in an "L" shape with this barbed elbow.

Remove dirt and particles from your irrigation system with the DIG 3/4 in. Protects drippers and micro sprinklers from clogging. Hose Thread Screen Filter. Inner filter can be easily removed for cleaning.

This multi-stream dripper head is an efficient and gentle way to spot water plants and shrubs. The control knob adjusts water flow and spray distance. To be used outdoors with cold water only.

Comes assembled with spray jet, a 13 in. Micro tubing and barb connector. Slow application of water means less runoff and increased soil absorption. The DIG 180° Jet Sprinkler on Spike ensures uniform saturation of a specified area.