Watering Irrigation Drip Irrigation For Sale In San Jose

In-Line Shut-Off Valve is to allow full control to turn on or off the flow of 1/2 in. The DIG 1/2 in. Turn valve 90° to stop the flow of water. Installs easily with barbed inlet and outlet, providing a water tight seal without the use of glue.

Threaded riser. Female-threaded pipe fittings (sold separately). Add a Drip watering line to an existing shrub head or 1/2 in. MPT 1-Port Manifold features an easy-clean filter that helps prevent clogged nozzles.

In-Line Shut-Off Valve is to allow full control to turn on or off the flow of 1/4 in. The DIG 1/4 in. Turn valve 90° to stop the flow of water. Installs easily with barbed inlet and outlet, providing a water tight seal without the need for glue.

Barbed ends permit easy, leak-free insertion into drip tubing. Easily adjust or shut off flow in 1/2 in. Avoid over- or under-watering of plants with different moisture needs in the zone.

Barb Connector is used to provide a secure connection of two pieces of 1/4 in. Micro tubing, soaker hose or drip-line. Each connection offers raised barbed ends to ensure a strong, water tight fit.

Long each) and a 12 ft. Perfect for potted plants, hanging baskets and vegetable gardens, the Planters Drip Kit features pre-assembled components with water saving technologies. Water supply tube.

Elbow has a 1/2 in. This Easy Fit 1/2 in. Connection size. The elbow is designed to help you connect hose into your sprinkler and irrigation system.

The kit includes all the parts needed to install a drip irrigation system to water roses, vines, shrubs or vegetables, starting from a raised rain barrel with a hose thread outlet or from a garden faucet using the included pressure regulator.

And can be expanded using additional raindrip products. It is ideal for all vegetable garden areas and creates excellent growth and plant health with little water. This kit comes with everything you need to set up your drip watering system.

Barbed Tee is used to provide a secure connection of three pieces of 1/4 in. Micro tubing, soaker hose or drip-line. Each connection offers raised barbed ends to ensure a strong, water tight fit.

This water conserving drip system covers up to 150 sq. The DIG Drip Irrigation Watering Kit is ideal for watering shrubs, trees, flowers, bushes and more. Everything is included for a complete installation, no gluing is required.

Attaches to a 1 in. The 2-in-1 stands in the market as the industry's first "one piece" Drip Filter, and 30 psi Pressure Regulator combination. Compact design to fit in a standard Valve box.

The riser adjusts up to 18 in. H and the spray adjusts from 0 ft. Drip irrigation tubing. Apply drip watering efficiency in more places around your landscaping with this versatile staked riser with adjustable micro spray flow and height.

PVC irrigation piping. The Blazing Saddle Swing Pipe Barb is for use with 1 in. Simply clamp, push down, twist, and you are done. This saddle is ideal for both contractors and DIY.

Pipe thread connector by 1/2 in. Compression fittings are a simple and secure way to assemble your drip irrigation system. Easily connect to a 3/4 in. Pipe thread outlet to start your drip irrigation system.

The valve kit features built-in backflow prevention, a stainless-steel mesh filter to keep drip emitters clean, a pressure regulator to control pressure and a convenient shut-off valve for maintenance.

These emitters can be used with Blue Stripe Drip 1/4 in. Additionally, the emitters feature a pressure-compensating diaphragm. Toro Blue Stripe Drip Turbo SC Plus Emitters (6-Pack) are ideal for individual plants and have a self-flushing mode that clears...

Green King Watering Stakes are designed to efficiently and effectively water your trees, shrubs, and plants directly at the roots. They help conserve up to 50% of your outdoor water use by avoiding water loss, due to evaporation and run-off.

Hose, the Toro Blue Stripe Drip 1/2 in. Designed to join 2 lengths of Blue Stripe Drip 1/2 in. Riser Adapter Tees (2-Pack) offer a fit that resists leakage. Use to retrofit an existing irrigation system from a 1/2 in.

Distribution (or soaker) tubing. For outdoor use and cold water only. Used to connect all brands of 1/4 in. Distribution or soaker tubing. Double barb design adds additional holding power.

Sprinkler Risers are ideal for elevating jet sprayers, foggers or threaded micro sprinklers. These DIG Corp 6 in. Above the ground, these risers help increase the circumference of the wetting area.

Stake includes a flow control knob to adjust spray distance from 5-10 ft. Sold in a bag of 5, these micro sprinklers come with snap-on nozzles for Full, Half, and Quarter Spray Patterns.

Fittings, heads, and accessories. Drip installation instructions are also included in this handy, refillable case. All of the products included are universal and work with most major brands.

Vintage Air 12513-VCD U Bend 'Em Aluminum Refrigerant Hardline U Bend 'Em Aluminum Refrigerant Hardline -8 AN 1/2" Outer Diameter Male-Female O-Ring End Fittings 12" Section U Bend 'Em Aluminum Refrigerant Hardline -8 AN 1/2" Outer Diameter Male-Female...

Water your garden with ease, simply stake down the drip line in your garden bed and attach the garden hose. This universal kit can be used on any raised or elevated garden bed. Works great with a timer.

DIG Corp's 1/4 in. The durable micro tubing is manufactured of high quality, professional grade materials and can be used either above or below ground. Polyethylene micro tubing is used in the installation of drip irrigation system.

Poly riser can be used to extend the micro sprayers, misters, or foggers above the plant canopy, providing a simple solution to a spray height layout within the plant growth area. Long semi-rigid poly riser with self-piercing fast threaded barb is used...