Watering Irrigation Drip Irrigation For Sale In San Antonio

It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance. This easy-to-push-on Coupling works with the most common sizes of 1/2 in.

They feature a no-leak fit and are reusable. The Toro Blue Stripe Drip 1/2 in. Use to modify or expand a drip system. Elbows (4-Pack) are a convenient way to reconfigure an existing drip system.

Micro tubing, soaker hose or drip-line. The DIG 1/4 in. Each connection offers raised barbed ends to ensure a strong, water tight fit. Barbed Tee is used to provide a secure connection of three pieces of 1/4 in.

They will not come apart from a fitting causing water to wash out your plants, and they are reusable. The Toro Blue Stripe Drip 1/2 in. Couplings (4-Pack) are a convenient way to modify or expand your existing drip system.

Connect the male pipe thread with semi-rigid riser into the FNPT and thread or insert the micro sprinkler, micro sprayer or drip emitter into the top of the PE riser. Accommodates most all threaded emitters.

Can be used at the end of 1/4 in. RAINDRIP's turbulent flow PC (pressure compensating) drippers maintain their rated flow rate for 10 - 60 PSI inlet pressure. Tubing feeder lines or anywhere they are needed.

The kit contains 50 of 3/8 beige poly pipe, 10.8-GPH foggers and all components needed to install the kit. It can reduce the surrounding air temperature up to 20° and, the hotter and drier the air, the more noticeable the cooling effect.

These 360°, Adjustable Drip Emitter on Spike offer a convenient way to water areas where conventional sprinkler systems are not workable. Available in two models, including model BA1B (pack of 4) and B10B (pack of 10).

25 psi pressure regulator, 3/4 in. Drip tubing with .600 ID x .700 OD, 50 ft. This environmentally friendly kit can conserve water and use clean, renewable solar power without the need for a backup battery or AC power.

Everything is included for full installation, no gluing is required. Complete drip irrigation system ideal for watering pots or planter boxes. Keep up to 10 of your potted plants lush and hydrated with this water conserving drip system.

Great for a new install, or if you are retrofitting an existing system. Rain Bird drippers are made to the highest standard. Giving the user the flexibility to use them in many climates.

Tubing or inserted into the side wall of 1/2 in. 2.0 gph (gallons per hour) emitters are ideal for supplemental watering of individual plants. Distribution tubing. They can be used in-line with 1/4 in.

Clean nozzle by completely unscrewing cap from base unit. Sprays fine water droplets in a 360 full circle pattern and is easy to adjust for flow, and distance. Use this versatile professional grade fan micro spray nozzle to apply water-saving Drip irrigation...

Suggested operating pressure range is 20 - 50 psi. Pop-up spray retracts fully when not in use. Ideal for flowers, mixed planting beds as well as gardens, each pop-up spray delivers 10 -13 GPH.

It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance. This easy-to-push-on Coupling works with the most common sizes of 1/2 in.

Tubing or inserted into the side wall of 1/2 in. 0.5 gph (gallons per hour) emitters are ideal for supplemental watering of individual plants. Distribution tubing. They can be used in-line with 1/4 in.

Slow application of water means less runoff and increased soil absorption. Micro tubing and barb connector. Comes assembled with spray jet, a 13 in. The DIG 360° Jet Sprinkler on Spike ensures uniform saturation of a specified area.

Orbit's 1/4 in. The oversized finger tabs allow for easier installation. Tubing to your 1/2 in. Distribution tubing. Use to adapt 1/4 in. Barbed fittings feature a double barb design for increased grip and durability.

This kit includes cut-to-length tubing and maximizes watering efficiency by hydrating the root zone and eliminating overspray. The Rain Bird Pop-Up to Micro Bubbler Conversion Kit contains all components needed to convert a pop-up sprinkler head to a...

Its uniform watering and low volume technology help soil achieve maximum water absorption, which increases plant growth and decreases water waste. Designed to hydrate while conserving water, the Elgo 50 ft.

This convenient flush port allows filter cleaning without filter removal. The Orbit 3/4 in. To be used outdoors with cold water only. MPT Drip Y-Filter is designed to remove debris from the water source, reducing clogged emitters and sprinkler nozzles.

Fitting sizes and can handle pressure up to 70 psi. The 360° Threaded Umbrella Bubblers (2-Pack) adjust 360° to water your lawn. Use as an emitter for watering lawns. The bubblers feature 1/4 in.

Polyethylene irrigation piping. Simply clamp, push down, twist, and you are done. This saddle is ideal for both contractors and DIY. The Blazing Saddle Swing Pipe Barb is for use with 1-1/2 in.

Spray Pattern: Full-Circle

Thread Type: Threaded

Orbit 67025 Quad Full-Flow Manifold Orbit 67025 Quad Full-Flow Manifold

• Brand Name: Orbit
• Coverage Area: 40 ft.
  • ✓ Thread Type: Threaded
  • ✓ Spray Pattern: Full-Circle
  • ✓ Brand Name: Orbit
  • ✓ Color Family: Black

  • Condition: New
  • Brand: Orbit Underground
  Texas

  San Antonio

Gunite Venturi Tee 4" Nozzle Gunite Venturi Tee 4" Nozzle. Gunite Venturi Tee 4" Nozzle.

The mesh filter is easy to remove for cleaning. This filter is designed specifically for drip watering systems. Removing debris from the water supply minimizes clogging in drippers and spray nozzles.

Stake plus 36 in. The riser adjusts up to 18 in. It is ideal for taller plants such as shrubs and bushes well as for use in flower beds and ground cover where you may want broader coverage.