Watering Irrigation Drip Irrigation For Sale In Maryland

Includes 100 ft. The DIG Maverick 12-outlet drip irrigation manifold kit provides a quick solution for saving water. Easily convert a sprinkler riser to a 12-outlet drip system. Incorporating a Maverick drip manifold can save water while increasing your...

The vegetable watering kit will deliver almost unbelievable results with tomatoes and many other bedding vegetables. You will be amazed at how fast your plants will grow with so little time and attention.

The DIG 4 GPH Flag Drippers provide a reliable, point source irrigation solution for your drip system. Twist open flag top can be removed for easy cleaning. Flag drippers offer the posted flow rate with a line pressure of 25 psi.

This all-in-1 unit includes a 200-mesh filter and 30 PSI pressure regulator. Riser to a drip zone. For proper operation of a drip irrigation system. Convert a Rain Bird 1800 series spray head or a 1/2 in.

1-GPH drip line with 18 in. Riser conversion adapter, 3/4 in. The G50 Landscape Drip Watering Kit is a complete kit to start a drip irrigation system from a 1/2 in. The kit is also suitable to install around building foundations to prevent slab damage...

The DIG 3/4 in. Female Hose Thread x 1/2 in. Garden hose or hose thread to 1/2 in. Compression fitting provides a secure, water-tight fit. Easily installed without the use of special tools or glues.

Cut, connect and secure tubing and emitters to individual plants. Barbed Couplings (4-Pack) are used to connect 2 pieces of 1/2 in. The couplings facilitate a fast and convenient installation.

Protects drippers and micro sprinklers from clogging. Hose Thread Screen Filter. Inner filter can be easily removed for cleaning. Remove dirt and particles from your irrigation system with the DIG 3/4 in.

This multi-stream dripper head is an efficient and gentle way to spot water plants and shrubs. The control knob adjusts water flow and spray distance. To be used outdoors with cold water only.

Provides a secure, water tight fit without the use of glues or special tools. Poly tubing regardless of tubing's specific inner or outer diameter. Made from rugged, UV resistant plastic.

DIG pressure compensating drippers help ensure your outdoor plants and landscaping are getting just the right amount of water. Labyrinth water passage regulates the flow of water to provide the most accurate and consistent irrigation despite pressure...

Drip installation instructions are also included in this handy, refillable case. Fittings, heads, and accessories. All of the products included are universal and work with most major brands.

Utilizing a double barb, the drip line is pushed over the barbed side of the fittings for a tight, leak-free connection. MPT x 17 mm barb adapter is used in the installation of DIG's and others 17 mm pressure compensating (PC) drip line.

Includes 100 ft. The DIG Maverick 12-outlet drip irrigation manifold kit provides a quick solution for saving water. Easily convert a sprinkler riser to a 12-outlet drip system. Incorporating a Maverick drip manifold can save water while increasing your...

This easy-to-push-on Coupling works with the most common sizes of 1/2 in. It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance.

The DIG Corp Adjustable-Flow Bubbler on Spike provides controlled watering feature to accommodate a variety of different plants within your system. Watering radius is adjustable from a gentle flow to off.

MPT 1-Port Manifold features an easy-clean filter that helps prevent clogged nozzles. Add a Drip watering line to an existing shrub head or 1/2 in. Female-threaded pipe fittings (sold separately).

The DB250 Drip Irrigation Maintenance and Repair Expansion Bucket is a fully loaded 162 piece kit that is used to repair, expand, or maintain your drip irrigation system. Micro-tubing to help you keep your existing drip system maintained and operating...

The couplings are a great choice for your sprinkler and irrigation system. Barbed Couplings (30-Pack) offers quick, easy connection. Connection size. Featuring a 1/4 in. The barbed design of these 1/4 in.

Irrigation tubes together. The Toro Blue Stripe 3/4 in. Also, barb connections are featured on each end. This coupling has a pressure rating of 161. Drip Coupling is used to connect two 1/4 in.

Used to reduce and regulate the water pressure entering a low volume irrigation system, the 30 psi preset pressure regulator can lower the incoming pressure from as high as 150 psi to a downstream pressure of 30 psi at a flow range of 0.5 to 12 GPM.

Non-pressure compensating. Barbed ends for direct insertion into the side of 1/2 in. Tubing for positioning near individual plants. Drip irrigation tubing or use with 1/4 in. Low-flow dripper for watering of small plants and containers.

Ideal for watering potted plants and plants spaced 10 in. Distribution tubing. This dripper allows connection of multiple drippers along a single line of 1/4 in. Cap off the end of the line by attaching a short piece of drip tubing to the last dripper...

The DIG 360-Degree Adjustable Mini-Bubbler emits uniform umbrella streams to provide 360 degree irrigation coverage. This adjustable bubbler comes on a on a stake and with a barb connector for easy installation.

Avoid over- or under-watering of plants with different moisture needs in the zone. Easily adjust or shut off flow in 1/2 in. Barbed ends permit easy, leak-free insertion into drip tubing.

The Toro Blue Stripe Drip 1/2 in (1.3 cm) Emitter Kit contains an assortment of drip emitters and accessories for your convenience. This eliminates the need to purchase various emitters, providing a convenient drip irrigation option for your landscape.

The DIG Adjustable-Flow Multi-Stream Dripper offers controlled watering feature to accommodate a variety of different plants within your system. Drip emitter watering radius is adjustable from a gentle stream pattern to drip and to off.