Watering Irrigation Drip Irrigation For Sale In Canada

• ✓ Each emitter features 2 outlets to help prevent clogging
• ✓ Kit includes everything needed for a complete installation
• ✓ 2 outlets per each drip emitter helps to prevents clogging
• ✓ Water your vegetable garden to promote growth

• Kit Type: Planters
• Returnable: 90-Day

• ✓ Includes 50 ft. of 1/4 in. distribution tubing
• ✓ The conversion head has a built-in pressure regulator and filter
• ✓ Converts a sprinkler head to a drip watering zone with no digging
• ✓ Comes with everything you need to convert a sprinkler head or ½ in. riser to 6 drippers for watering shrubs and landscaping
• ✓ All-in-1 kit includes fine mesh filter, 30 PSI pressure regulator and manifold that connects to 1/4 in. tubing

• Kit Type: Drip Irrigation Kit,Planters

• ✓ Easy to use push on fitting
• ✓ Works with the most common sizes of 1/2 in. drip tubing (0.670 in. - 0.710 in. O.D.)
• ✓ Unique release feature simplifies installation and maintenance
• ✓ For outdoor use only
• ✓ Made of durable, UV-resistant materials for years of dependable use

• Product Length (in.): 2.0

• Fitting Type: Compression Fittings
• Returnable: 90-Day
• Product Height (in.): 12
• Black fittings are .600 ID (inside diameter) x .700 OD (outside diameter): Yes
• Drip Irrigation Fitting Type: Tee
• Product Length (in.): 10 in

• ✓ O-ring material: EPDM
• ✓ Body material: ABS
• ✓ Burst pressure exceeds 400 PSI; however, this product is not intended to be used on main lines or under constant pressure

• Drip Irrigation Fitting Type: Coupling
• Product Width (in.): 1.1875
• Material: Acrylonitrile Butadiene Styrene (ABS)

• ✓ Simple setup - reuse for several seasons
• ✓ Add a capful of liquid fertlizer at each fill - stand back and watch the results
• ✓ Going on vacation? No problem

• Irrigation System Component: Kit

• ✓ 1 GPH flow rate from each dripper
• ✓ 3/4 in. Backflow preventer is included
• ✓ Included drippers are pressure compensating (PC) providing consistent, uniform flow
• ✓ Saves water by delivering water right where it is needed most, at the plant root zone

• Number of pieces included: 47
• Color Family: Blacks

.625

• Inner Diameter (in.): .625
• Connection: Male Pipe Thread
• Outer Diameter (in.): .625
• No-leak fit: Yes
• Product Length (in.): 1.813
• Product Width (in.): 0.813

.25

• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Pressure Rating: 0 - 50 psi
• Allows creation of a custom layout for your planting area: Yes
• Product Width (in.): .25
• Returnable: 90-Day
• Outer Diameter (in.): .25

• ✓ Connects any 1/2 in. drip tubing
• ✓ Disassembles easily for maintenance

1.5

• Material: Polypropylene
• Color Family: Browns / Tans
• Product Width (in.): 1.5
• Product Length (in.): 1.5

• ✓ 5 pieces per bag
• ✓ For use with 1/4 in. distribution or soaker tubing
• ✓ To be used with Drip Irrigation

• Connection: Barb x Barb
• Manufacturer Warranty: None
• Outer Diameter (in.): 0.25

• ✓ System includes, reel holder with 2 water supply tubes (50 ft. long each) with drip holes every 12 in., pressure regulator, hose connector, 4 mounting spikes, component hardware
• ✓ 2 drip lines offer 100 lin. ft. of coverage

• Irrigation System Component: Kit
• Kit Type: Drip Irrigation Kit
• Number of pieces included: 6
• Manufacturer Warranty: 2 Years

• Special, extra sharp barb design for secure and easy installation of the brown drip line without glue or clamps: Yes
• Color Family: Browns / Tans
• Pressure Rating: 35 PSI
• Connection: Barb x Barb
• Inner Diameter (in.): .50
• Product Width (in.): 4 in

• Connection: Screw on
• Outer Diameter (in.): .50
• Returnable: 90-Day
• Product Width (in.): 3.5
• Fitting Type: Push to Connect Fittings
• Product Height (in.): 5

0.75

• Outer Diameter (in.): 0.75
• Easily installed: Yes
• Pressure Rating: 60
• Inner Diameter (in.): 0.75
• Drip Irrigation Fitting Type: Coupling
• Fitting Type: Compression Fittings

• ✓ Maximum operating pressure: 80 PSI for #80 pipe, 100 PSI for #100 pipe, and 160 PSI for #160 pipe
• ✓ O-ring material: EPDM
• ✓ Suggested operating pressure is 10-80 PSI
• ✓ Flow rates are comparable to traditional insert fittings

• Returnable: 90-Day
• Product Width (in.): 1.125

• ✓ 1/2 in. fitting
• ✓ For irrigation applications only
• ✓ Made of durable, UV-resistant materials for years of dependable use
• ✓ Easy-to-push-on fitting

• Outer Diameter (in.): 0.5
• Fitting Type: Push to Connect Fittings

• ✓ For irrigation applications only
• ✓ Convenient installation and maintenance
• ✓ For outdoor use with cold water only

• Product Height (in.): 1.25
• Pressure Rating: 80
• Material: Polyethylene

• ✓ Quick tips; dip ends of tubing in warm water for a minute to soften up before inserting into fitting, and twist fitting onto tubing while inserting if necessary
• ✓ Total satisfaction policy
• ✓ Works with virtually any manufacturer's 1/2 in. tubing, where the outside diameter ranges from 0.630 in. to 0.700 in.

• Inner Diameter (in.): .63
• Fitting Type: Push to Connect Fittings
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• ✓ Use to connect Blue Stripe Drip 1/2 in. tubing to an outdoor faucet
• ✓ Kit includes: 10 blue 0.5 GPH emitters, 10 black 1 GPH emitters, 10 red 2 GPH emitters, 10 tie-down stakes, 1 hole punch, 24 hose plugs, 1 end clamp and 1 hose adapter
• ✓ Self-flushing NGE emitters are pressure compensating for uniform flow, even on sloping landscapes

• Irrigation System Component: Kit
• Package Quantity: 1
• Kit Type: Drip Irrigation Kit

• Package Quantity: 1
• Material: Polypropylene
• Manufacturer Warranty: 3 year
• Drip Irrigation Fitting Type: Elbow
• Inner Diameter (in.): .50
• Universal nut lock system offers a tight fit regardless of the size of the tubing: Yes

• ✓ Kit includes: 50 ft. of 1/4 in. pre-assembled tubing and 10 wire stakes
• ✓ 2 simple steps are needed to install this kit: step 1 - connect to water source, step 2 - lay out the supply tubing - no need to add drippers or connectors because they are already pre-installed in the dripper line

• Included: Garden Hose Connection,Stakes,Tubing
• Returnable: 90-Day
• Kit Type: Drip Hose Bib Kits
• Manufacturer Warranty: 2 year limited

• ✓ Eliminates the need to hand water free-standing planters and patio pots
• ✓ Eliminates hand watering of free-standing planters & patio pots

• Irrigation System Component: Kit
• Kit Type: Patio Starter Kit
• Included: Filter,Garden Hose Connection,Pressure Regulator,Sprinklers,Stakes,Tubing,Tubing Clips
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• ✓ Pressure regulator helps provide even and consistent water flow throughout the entire system.
• ✓ Complete kit perfect for watering potted plants, hanging baskets and vegetable gardens
• ✓ Pre-assembled system saves time, no cutting or hole punching required
• ✓ Bleed function allows you to flush any debris from system

• Irrigation System Component: Kit
• Included: Backflow Preventer,Filter,Garden Hose Connection,Pressure Regulator

• ✓ Easy push-together installation
• ✓ Requires up to 50% less force to install tubing
• ✓ 70 PSI pressure rating
• ✓ Total satisfaction policy
• ✓ UV resistant plastic for long life
• ✓ Provide an easy fit

• ✓ Pack of 25
• ✓ Resistance causes a compression seal that the water cannot penetrate

• Connection: Comp
• Package Quantity: 25
• Product Width (in.): 10
• Product Length (in.): 10 in

• Fitting Type: Push to Connect Fittings
• Product Height (in.): 1.125
• Product Length (in.): 2.25
• Product Width (in.): 1.75
• Drip Irrigation Fitting Type: Coupling
• Connection: Snap-on