Watering Irrigation Drip Irrigation Fittings For Sale In Manitoba

Do not over tighten. Hose thread outlet. This DIG conversion elbow is used to convert any 1/2 in. Male hose thread any fitting, ¾ in. (Make sure that the female thread used has a washer.).

Sprinkler riser into a low flow drip irrigation zone. Riser to 1/2 in. The 25 psi pressure regulator reduces the outgoing pressure, providing protection to the zone. Conversion adapter, a 25 psi preset pressure regulator, and a 0.700 O.D. swivel tee to...

Easily connect 1/2 in. Made from durable, UV resistant materials for long life in the landscape. Ideal for repairing or expanding your drip irrigation system. Poly tubing and create a strong, water tight seal without the use of glues or special tools.

It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance. This easy-to-push-on Coupling works with the most common sizes of 1/2 in.

MPT x 17 mm barb adapter is used in the installation of DIG's and others 17 mm pressure compensating (PC) drip line. Utilizing a double barb, the drip line is pushed over the barbed side of the fittings for a tight, leak-free connection.

This line of Clampless fittings require no tools or extra fittings to install. The Blazing Fast Fittings 1 in. Made of high-impact ABS, the Blazing Fast Fittings are the most eco-friendly fittings on the market.

Poly tubing compression fitting. Pipe thread connector by 1/2 in. Compression fittings are a simple and secure way to assemble your drip irrigation system. Pipe thread outlet to start your drip irrigation system.

The DIG 1/4 in. Each connection offers raised barbed ends to ensure a strong, water tight fit. Micro tubing, soaker hose or drip-line. Barbed Tee is used to provide a secure connection of three pieces of 1/4 in.

These couplings are barbed and non-threaded. Designed for use in your sprinkler and irrigation system. Barbed Couplings (10-Pack) help you connect pieces of hose.

The DIG 1/4 in. Each connection offers raised barbed ends to ensure a strong, water tight fit. Micro tubing, soaker hose or drip-line. Barb Connector is used to provide a secure connection of two pieces of 1/4 in.

Orbit's 1/4 in. The oversized finger tabs allow for easier installation. Barbed fittings feature a double barb design for increased grip and durability. Distribution tubing. Tubing to your 1/2 in.

The DIG 1/4 in. Each connection offers raised barbed ends to ensure a strong, water tight fit. Micro tubing, soaker hose or drip-line around sharp corners. Barbed Elbow is used to provide a secure connection of two pieces of 1/4 in.

Compression fitting provides a secure, water tight fit without the use of glue. The DIG Hose Thread Swivel Tee is designed to attached your drip irrigation system to a hose thread outlet.

Compatible with all brands of 1/2 in. Drip irrigation tubing. Compression fittings provide quick, leak-tight connection. Hose bib or garden hose. This adapter provides simple connection of a drip system to a 3/4 in.

The Toro Blue Stripe Drip 1/2 in. Use to modify or expand a drip system. They feature a no-leak fit and are reusable. Elbows (4-Pack) are a convenient way to reconfigure an existing drip system.

Drip Irrigation Tubing. Includes 150 mesh stainless steel filter to catch debris and prevent clogging. Outside diameter Drip irrigation tubing. Drip irrigation tubing to 3/4 threaded faucet or garden hose.

Easily adjust or shut off flow in 1/2 in. Drip tubing runs to different sections of your plant watering area. Barbed ends permit easy, leak-free insertion into drip tubing. Top cap turns to adjust flow.

Installs easily with barbed inlet and outlet, providing a water tight seal without the use of glue. In-Line Shut-Off Valve is to allow full control to turn on or off the flow of 1/2 in.

Easily connect 1/2 in. Made from durable, UV resistant materials for long life in the landscape. Ideal for repairing or expanding your drip irrigation system. Poly tubing and create a strong, water tight seal without the use of glues or special tools.

Easy push-together installation connects 2 pieces of 1/2 in. Connect pieces of hose quickly and easily with this Easy Fit 1/2 in. Made for use in a sprinkler and irrigation system.

Use to retrofit an existing irrigation system from a 1/2 in. Hose, the Toro Blue Stripe Drip 1/2 in. Designed to join 2 lengths of Blue Stripe Drip 1/2 in. Riser Adapter Tees (2-Pack) offer a fit that resists leakage.

Poly tubing compression fitting. Pipe thread connector by 1/2 in. Compression fittings are a simple and secure way to assemble your drip irrigation system. Pipe thread outlet to start your drip irrigation system.

This kit provides a complete assembly for connecting a drip irrigation system to an outdoor faucet with an extra outlet left for your garden hose. DIGs Drip Zone Faucet Connection Kit with a 2-Way Splitter combines all the parts needed to start a drip...

The DIG 1/4 in. Each connection offers raised barbed ends to ensure a strong, water tight fit. Micro tubing, soaker hose or drip-line. Barb Connector is used to provide a secure connection of two pieces of 1/4 in.

DIG's D48 makes it simple to connect a 1/2 in. Poly tubing to 1/2 in. (PVC side will require glue for connection). Poly tubing is inserted easily into the compression side without the need for glue or special tools.

It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance. This easy-to-push-on Coupling works with the most common sizes of 1/2 in.

Easily connect 1/2 in. Made from durable, UV resistant materials for long life in the landscape. Ideal for repairing or expanding your drip irrigation system. Poly tubing and create a strong, water tight seal without the use of glues or special tools.