Watering Irrigation Drip Irrigation Fittings For Sale In Kansas

• Simple and easy solution for starting a drip irrigation system; provides flexibility in converting a 1/2 in. riser into a drip irrigation zone in a few steps; secure and easy installation of drip line or drip tubing without glue or clamps: Yes
• Connection: Male Pipe Thread
• Manufacturer Warranty: 3 year warranty
• Product Length (in.): 6 in
• Returnable: 90-Day
• Color Family: Blacks

• ✓ Easy to install without use of special tools
• ✓ Used as a connection method for a drip irrigation system

• Returnable: 90-Day
• Product Width (in.): 1.25 in
• Color Family: Blacks
• Fitting Type: Compression Fittings

• Product Length (in.): 10 in
• Outer Diameter (in.): 0.50
• Resistance causes a compression seal that the water cannot penetrate: Yes
• Fitting Type: Compression Fittings
• Product Height (in.): 12
• Inner Diameter (in.): .50

• ✓ For outdoor use only
• ✓ Hand twist the outer nut to lock the tubing on the fitting
• ✓ Durable and long lasting material

• Manufacturer Warranty: None
• Connection: Snap-on
• Pressure Rating: 120 PSI

• ✓ Friction loss is comparable to traditional insert fittings
• ✓ O-ring material: EPDM
• ✓ Suggested operating pressure is 10-80 PSI
• ✓ Burst pressure exceeds 400 PSI; however, this product is not intended to be used on main lines or under constant pressure

• Product Width (in.): 1.1875
• Outer Diameter (in.): 1.315

• ✓ Faster and easier to install—requires up to 50% less force to install tubing, making your installation project faster and easier
• ✓ Accepts any manufacturer's O.D. tubing from 0.630" to 0.700"
• ✓ Non-threaded

• Package Quantity: 1
• Outer Diameter (in.): .70
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• ✓ Works with all brands of 1/4" drip tubing
• ✓ Durable and long lasting material
• ✓ Easy to install
• ✓ Double barb design adds additional holding power

• Connection: Barb
• Manufacturer Warranty: 1

1 in

• Fitting Type: Compression Fittings
• All DIG compression fittings with black insert fit polyethylene drip tubing with .690 O.D., .700 O.D., .704 O.D. and brown PC drip line: Yes
• Manufacturer Warranty: 3 years
• Pressure Rating: 60
• Product Length (in.): 1 in
• Product Width (in.): 1 in

• ✓ Flow rates are comparable to traditional insert fittings
• ✓ O-ring material: EPDM
• ✓ Burst pressure exceeds 400 PSI; however, this product is not intended to be used on main lines or under constant pressure
• ✓ Suggested operating pressure is 10-80 PSI
• ✓ Friction loss is comparable to traditional insert fittings

• Product Height (in.): 1

• Fitting Type: Compression Fittings
• Material: ABS Plastic
• Product Width (in.): 10
• Pressure Rating: 60
• Resistance causes a compression seal that the water cannot penetrate: Yes
• Package Quantity: 25

.5

• ✓ Total satisfaction policy
• ✓ Easy twist on and off design

1.0 in

• Inner Diameter (in.): .5
• Outer Diameter (in.): .5
• Product Length (in.): 1.0 in
• Product Width (in.): 1.0 in

• ✓ 3/4 in. FHT x 1/2 in. compression tee
• ✓ Recommended operating pressure: 0 to 60 PSI
• ✓ Use with 1/2 in. or 5/8 in. drip irrigation tubing (0.63 in. or 0.70 in. O.D.)

• Material: Plastic
• Package Quantity: 1
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

.625

• Outer Diameter (in.): .625
• Pressure Rating: 25 PSI
• Connection: Male Pipe Thread
• Inner Diameter (in.): .625
• Reusable and easy to remove: Yes
• Product Length (in.): 1.813

• ✓ 1/2 in. fitting
• ✓ Made of durable, UV-resistant materials for years of dependable use
• ✓ For outdoor use with cold water only

• Material: Plastic
• Drip Irrigation Fitting Type: Adapter
• Inner Diameter (in.): 0.5

• Product Height (in.): 1
• Material: Acrylonitrile Butadiene Styrene (ABS)
• Pressure Rating: 10-80 PSI
• Fitting Type: Push to Connect Fittings
• Friction loss is comparable to traditional insert fittings: Yes
• Connection: Male Hose Thread

• Material: Polypropylene
• Drip Irrigation Fitting Type: Tee
• Outer Diameter (in.): .50
• Pressure Rating: 60 psi
• Product Width (in.): 3.5
• Package Quantity: 1

• Pressure Rating: 161
• Product Height (in.): 5.5
• Fittings are barbed for easy, no-tool installation: Yes
• Manufacturer Warranty: 1 YR
• Fitting Type: Barb Fittings
• Drip Irrigation Fitting Type: Tee

• ✓ Easy to use
• ✓ Works with the most common sizes of 1/2 in. drip tubing (0.690, 0.700 and 0.710 O.D.)

• Material: Plastic
• Package Quantity: 1
• Drip Irrigation Fitting Type: Coupling
• Product Height (in.): 1.125

• Outer Diameter (in.): .25
• Material: ABS Plastic
• Connection: Barb x Barb x Barb
• Color Family: Blacks
• Manufacturer Warranty: 3 Year Warranty
• Inserts easily into 1/2 in. poly tubing and 1/4 in. micro tubing for a watertight fit: Yes

• ✓ Universal-fits on all 1/4 in distribution tubing
• ✓ Black in color
• ✓ Includes: 10 couplings, 10 plugs, 5 tees, and 5 elbows

• Pressure Rating: 25 PSI
• Outer Diameter (in.): 0.25
• Product Height (in.): 5.750 in

• ✓ Contains UV inhibitors to protect against direct sun exposure
• ✓ Made from durable, high-quality material

• Product Width (in.): .4 in
• Manufacturer Warranty: 3 Year Warranty
• Returnable: 90-Day
• Pressure Rating: 60

• Product Width (in.): .5 in
• Product Height (in.): 5.5
• Spray Pattern Degrees: 360 Degrees
• Manufacturer Warranty: 3 Year Warranty
• Color Family: Blacks
• Package Quantity: 5

• ✓ Light and compact design
• ✓ Resistance causes a compression seal that the water cannot penetrate

• Manufacturer Warranty: 3 Year Warranty
• Product Width (in.): 1 in
• Material: ABS Plastic
• Connection: Comp x Comp

• Product Width (in.): 1.75
• Drip Irrigation Fitting Type: Coupling
• Connection: Press Fit
• Unique release feature simplifies installation and maintenance: Yes
• Product Height (in.): 1.125 in
• Manufacturer Warranty: 1 year

• ✓ For cold water use only
• ✓ 6 in. Stake

• Spray Pattern Degrees: Full Circle
• Returnable: 90-Day
• Pressure Rating: 120 psi
• Maximum Gallons Per Minute: 0.025

• ✓ Working pressure rated from 0-50 PSI
• ✓ 1/4 in. connection size
• ✓ For use in drip irrigation to run emitters to individual plants
• ✓ Barbed design

• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Drip Irrigation Fitting Type: Coupling

• ✓ Easy to install
• ✓ Use to retrofit an existing irrigation system from a 1/2 in. riser

• Drip Irrigation Fitting Type: Adapter
• Manufacturer Warranty: 1 YR
• Pressure Rating: 25 PSI
• Color Family: Blacks