Agiseek home

Veneered Mdf

Become a Partner
1 in. x 2 in. x 8 ft. MDF Moulding Board
★★★★★
Prices start at : 5.73 USD / each

Some S4S mouldings board can be used as balusters to support hand rails. MDF S4S moulding board is great for constructing cabinets or bookcases. MDF S4S Moulding Board can be used for a wide variety of projects.
  • ✓ Can also be used to accent shelving, cabinets or any other interior elements
  • ✓ Smooth, consistent surface is factory finished for easy installation
  • Manufacturer Warranty: N/A
  • Nominal Product Length (ft.): 8
  • Board Joint Type: Square Edge
  • Fastener recommendation: 18 ga brad nails. 1" to 1-1/4" long
Georgia
Atlanta
All Weather System 2.2 in. x 2.2 in. x 8 ft. Composite Siding End Trim in Peruvian Teak Board
Prices start at : 24.00 USD / piece

The siding will slide into the trim and create a finished look for your wall and/or enclosing. It is made of the same product as the siding, so there are no issues with fading and staining.
  • Board Joint Type: Tongue and Groove
  • Nominal Product Thickness (in.): 1-1/8
  • Material: Composite
  • Finish Type: Finished
  • Fastener recommendation: N/A
  • Coverage Area (sq. ft.): 1
Georgia
Atlanta
All Weather System 2.2 in. x 2.2 in. x 8 ft. Composite Siding Outside Corner Trim Brazilian Ipe Board
Prices start at : 24.00 USD / piece

The siding will slide into the trim and create a finished look for your wall and/or enclosing. It is made of the same product as the siding, so there are no issues with fading and staining.

8

    • Nominal Product Length (ft.): 8
    • Texture: Smooth
    • Appearance Board Type: Composite Boards
    • Manufacturer Warranty: 5 Years
    • Seamless look: Yes
    • Actual product Length (ft.): 8
    Georgia
    Atlanta
    0.375 in. x 6.000 in. x 8 ft. Primed MDF Shiplap Interior Siding (10-Pack)
    ★★★★★
    Prices start at : 68.00 USD / package

    MDF has many advantages over plank wood, particleboard or high density fiberboard. This also means that a coat of primer and a couple of coats of paint take well, leaving an attractive, finished surface unlike other composite wood products.
    • Finish Type: Primed
    • Appearance Board Type: MDF Boards
    • Oil-base or latex paints can be used when finishing MDF: Yes
    • Returnable: 90-Day
    • Nominal Product Thickness (in.): 3/8
    • Number Of Boards Per Pack: 10
    Georgia
    Atlanta
    0 .472 in. x 5.5 in. x 96 in. Primed MDF Shiplap Interior Siding (8-Pack)
    ★★★★★
    Prices start at : 60.57 USD / package

    MDF Shiplap is a very uniform board when put together forms a ¼” gap (groove) which creates texture and depth to a wall or ceiling. MDF is an engineered wood made up of fine wood fibers and a resin binder to create a dense yet smooth board.
    • Actual product width (in.): 5.5
    • Nominal Product Length (ft.): 8
    • Nominal Product Thickness (in.): 1/2
    • Coverage Area (sq. ft.): 28.5
    • Does not split, cut, or twist: Yes
    • Board Joint Type: Shiplap
    Georgia
    Atlanta
    1 in. x 4 in. x 8 ft. MDF Moulding Board
    ★★★★★
    Prices start at : 9.5 USD / each

    Some S4S moulding board can be used as balusters to support hand rails. MDF S4S moulding board is great for constructing cabinets or bookcases. MDF S4S Moulding Board can be used for a wide variety of projects.
    • ✓ Simply nail to the wall and fill the holes for a perfect installation
    • ✓ Don't forget the color matched caulk and fill stick

    8

      • Board Joint Type: Square Edge
      • Nominal Product Thickness (in.): 1
      • Actual product Length (ft.): 8
      • Nominal Product Length (ft.): 8
      Georgia
      Atlanta
      1 in. x 8 in. x 8 ft. MDF Moulding Board
      ★★★★★
      Prices start at : 18.17 USD / each

      Use the complete solution of the color matched touch-up kit and caulk with your Finished Elegance installation to create a lasting impression for your entire room. Finished Elegance MDF S4S board is great for constructing cabinets or bookcases.
      • ✓ Simply nail to the wall and fill the holes for a perfect installation
      • ✓ Don't forget the color matched caulk and fill stick
      • ✓ Smooth, consistent surface is factory finished for easy installation
      • Manufacturer Warranty: N/A
      • Texture: Smooth
      • Appearance Board Type: MDF Boards
      Georgia
      Atlanta
      All Weather System 2.2 in. x 2.2 in. x 8 ft. Composite Siding End Trim in Hawaiian Charcoal Board
      Prices start at : 24.00 USD / piece

      The siding will slide into the trim and create a finished look for your wall and/or enclosing. It is made of the same product as the siding, so there are no issues with fading and staining.
      • Material: Composite
      • Actual product thickness (in.): 1.8
      • Returnable: 90-Day
      • Color matched with siding: Yes
      • Nominal Product Thickness (in.): 1-1/8
      • Appearance Board Type: Composite Boards
      Georgia
      Atlanta
      1 in. x 3 in. x 8 ft. MDF Moulding Board
      ★★★★★
      Prices start at : 6.94 USD / each

      Some S4S mouldings board can be used as balusters to support hand rails. MDF S4S moulding board is great for constructing cabinets or bookcases. MDF S4S Moulding Board can be used for a wide variety of projects.
      • ✓ Simply nail to the wall and fill the holes for a perfect installation
      • ✓ Can also be used to accent shelving, cabinets or any other interior elements
      • Board Joint Type: Square Edge
      • Returnable: 90-Day
      • Number Of Boards Per Pack: 1
      • Nominal Product Length (ft.): 8
      Georgia
      Atlanta
      All Weather System 2.2 in. x 2.2 in. x 8 ft. Composite Siding End Trim in Brazilian Ipe Board
      Prices start at : 24.00 USD / piece

      The siding will slide into the trim and create a finished look for your wall and/or enclosing. It is made of the same product as the siding, so there are no issues with fading and staining.

      1

        • Returnable: 90-Day
        • Features: Water Resistant
        • Coverage Area (sq. ft.): 1
        • Actual product width (in.): 1.7
        • Fastener recommendation: N/A
        • Number Of Boards Per Pack: 1
        Georgia
        Atlanta
        All Weather System 2.2 in. x 2.2 in. x 8 ft. Composite Siding Outside Corner Trim in Peruvian Teak Board
        Prices start at : 24.00 USD / piece

        The siding will slide into the trim and create a finished look for your wall and/or enclosing. It is made of the same product as the siding, so there are no issues with fading and staining.
        • ✓ Seamless look
        • ✓ Color matched with siding
        • Appearance Board Type: Composite Boards
        • Actual product width (in.): 2.2
        • Board Joint Type: Tongue and Groove
        • Returnable: 90-Day
        Georgia
        Atlanta
        All Weather System 2.2 in. x 2.2 in. x 8 ft. Composite Siding Outside Corner Trim in Hawaiian Charcoal Board
        Prices start at : 24.00 USD / piece

        The siding will slide into the trim and create a finished look for your wall and/or enclosing. It is made of the same product as the siding, so there are no issues with fading and staining.
        • ✓ Color matched with siding
        • ✓ Same material as siding
        • Actual product Length (ft.): 8
        • Nominal Product Thickness (in.): 2
        • Board Joint Type: Tongue and Groove
        • Nominal Product Width (in.): 2.2
        Georgia
        Atlanta
        42 sq. ft. MDF Cape Cod Beadboard Planking (9-Planks)
        ★★★★★
        Prices start at : 65.66 USD / box

        The style is a classic, yet modern beadboard that can be used for back splashes, ceilings or wall applications. Cape cod MDF beadboard plank paneling is a simple way to give your home a sophisticated finish.
        • ✓ Carb phase II compliant
        • ✓ Great for restorative projects and for new construction
        • Actual product Length (ft.): 8
        • Features: Beadboard,No Additional Features,Paintable
        • Board Joint Type: Tongue and Groove
        • Finish Type: Primed
        Georgia
        Atlanta
        1 in. x 6 in. x 8 ft. MDF Moulding Board
        ★★★★★
        Prices start at : 13.2 USD / each

        Some S4S mouldings board can be used as balusters to support hand rails. MDF S4S moulding board is great for constructing cabinets or bookcases. MDF S4S Moulding Board can be used for a wide variety of projects.
        • Manufacturer Warranty: N/A
        • Actual product width (in.): 5.5
        • Fastener recommendation: 18 ga brad nails. 1" to 1-1/4" long
        • Simply nail to the wall and fill the holes for a perfect installation: Yes
        • Nominal Product Width (in.): 6
        • Nominal Product Length (ft.): 8
        Georgia
        Atlanta
        All Weather System 2.2 in. x 2.2 in. x 8 ft. Composite Siding End Trim in Spanish Walnut Board
        Prices start at : 24.00 USD / piece

        The siding will slide into the trim and create a finished look for your wall and/or enclosing. It is made of the same product as the siding, so there are no issues with fading and staining.

        8

          • Features: Water Resistant
          • Nominal Product Length (ft.): 8
          • Actual product Length (ft.): 8
          • Manufacturer Warranty: 5 Years
          • Material: Composite
          • Appearance Board Type: Composite Boards
          Georgia
          Atlanta
          All Weather System 2.2 in. x 2.2 in. x 8 ft. Composite Siding Outside Corner Trim in Westminster Gray Board
          Prices start at : 24.00 USD / piece

          The siding will slide into the trim and create a finished look for your wall and/or enclosing. It is made of the same product as the siding, so there are no issues with fading and staining.

          2.2

            • ✓ Same material as siding
            • ✓ Easy to install
            • Actual product thickness (in.): 2.2
            • Manufacturer Warranty: 5 Years
            • Nominal Product Width (in.): 2.2
            • Fastener recommendation: N/A
            Georgia
            Atlanta
            2 in. x 2 in. x 8 ft. MDF Moulding Board
            Prices start at : 7.74 USD / each

            Some S4S mouldings board can be used as balusters to support hand rails. MDF S4S moulding board is great for constructing cabinets or bookcases. MDF S4S Moulding Board can be used for a wide variety of projects.
            • ✓ Don't forget the color matched caulk and fill stick
            • ✓ Simply nail to the wall and fill the holes for a perfect installation
            • Manufacturer Warranty: N/A
            • Coverage Area (sq. ft.): 1 ft²
            • Material: Medium Density Fiberboard (MDF)
            • Actual product width (in.): 1.5
            Georgia
            Atlanta
            All Weather System 2.2 in. x 2.2 in. x 8 ft. Composite Siding Outside Corner Trim in Roman Antique Board
            Prices start at : 24.00 USD / piece

            The siding will slide into the trim and create a finished look for your wall and/or enclosing. It is made of the same product as the siding, so there are no issues with fading and staining.
            • Material: Composite
            • Actual product width (in.): 1.7
            • Nominal Product Width (in.): 1.8
            • Nominal Product Thickness (in.): 2
            • Board Joint Type: Tongue and Groove
            • Appearance Board Type: Composite Boards
            Georgia
            Atlanta
            Beech Veneer, Crowned And Quartered
            Price : CALL

            Please contact us for more information.
            • Volume: 100 - 15.000 m2 (sqm) per month
            • Type of species: European Hardwood
            • Origin: Romania
            • Quality: COMERCIAL/SEMI-1ª CALIDAD.
            • Delivery deadline: In Stock
            • Length: 2.55+ m
            Valencian Community
            PAIPORTA -VALENCIA-
            Engineered Veneer, Teak, Flat Cut, Plain
            Price : CALL

            • Cut: Flat cut, plain
            • Length: 2500 mm
            • Width: 630 mm
            • Quality: A (first)
            • Type of species: African Hardwood
            Valencian Community
            PAIPORTA
            Natural Veneer, Walnut, Flat Cut, Plain
            Price : CALL

            I sell sliced ​​high quality of various essences divided on pallets with the same format In total are 30,000 square meters Price special offer 1 euro per square meter I sell closed packages whole pallets Refrain wasting time and no money Available...
            • Sliced veneer type: Natural Veneer
            • Quality: A (first)
            • Thickness: 6; 10 mm
            • Surface area: 30000 m2 (sqm)
            Veneto
            LOZZO DI CADORE (BL)
            Natural Veneer, Teak, Rifted
            Price : CALL

            • Cut: Rifted
            • Surface area: 3000 m2 (sqm)
            • Type of species: Asian Hardwood
            • Sliced veneer type: Natural Veneer
            Valencian Community
            PAIPORTA
            Oak Natural Veneer, 0.6 mm Thick
            Price : CALL

            • Sliced veneer type: Natural Veneer
            • Thickness: 0.6 mm
            • Cut: Flat cut, figured
            • Surface area: 50000 m2 (sqm)
            • Origin: Poland
            Mazowieckie
            RADOM
            Steamed Beech Veneer Offer
            Price : CALL

            Steamed beech veneer, lenght cm 210-245, AB grade, crown and quarter
            • Length: 210-245 cm
            • Cut: Flat cut, plain
            • Origin: Romania
            • Sliced veneer type: Natural Veneer
            • Thickness: 0.55 mm
            Veneto
            Maserada sul Piave
            Raw Wenge Rifted Sliced Veneer
            Price : CALL

            The pallet has 252 bundles: Width 30+ = 66 bundles Width 20+ = 93 bundles Width 12+ = 43 bundles Width 15- = 50 bundles Raw veneer on 1 pallet.
            • Width: ~100-300 mm
            • Sliced veneer type: Natural Veneer
            • Surface area: 3770 m2 (sqm)
            • Cut: Rifted
            • Thickness: 0.55 mm
            Trentino-Alto Adige
            Laces
            Steamed Beech AB grade 0.50 to 2.10 m
            Price : CALL

            Steamed Beech AB grade 0.50 cm to 210 cm Good veneer for furniture and door manufacturers.
            • Length: < 2.10 m
            • Sliced veneer type: Natural Veneer
            • Availability: In Stock
            • Origin: Romania
            • Surface area: 100.000 m2 (sqm)
            • Cut: Crown and quarter cut
            Galicia
            LA CORUNA
            European Oak Wrapping Veneer Rolls
            Price : CALL

            Wrapped material, supporting paper 23g/m², sanding grain 180 or 220, starting from width 130mm with middle splice, endless roll with finger joint 30 + 50g/m² supporting paper possible on request! Structure ranging from quarter cut till half-crown
            • Sliced veneer type: Natural Veneer
            • Volume: 1000 - 5000 m2 (sqm) per month
            • Type of species: European Hardwood
            • Cut: Schlicht bis Halbdosse
            • Incoterm: EXW - ex-works (seller's), goods are at seller's place Country Italy
            Trentino-Alto Adige
            Laces
            Agricultural market place, farms, farmers, land