Vacuum Regulation Monitoring Vacuum Components For Sale In Virginia

The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Replacement filters available. The Separate Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf).

Replacement filters available. Depending on the model, the Monobloc Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf).

Relief Valve safeguards the system against high vacuum incidents. For Sentinel models MKII and M100.

Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. Part number "348-17" on schematic diagram. For systems with CFM's over 250, two are recommended.

Replacement filters available. The Monobloc Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf).

Replacement filters available. The Monobloc Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf).

Safety Valve for Stabilvac Seperate styles.

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1100 and the CFM is 21.

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. At sea level at a temperature of 68F, with a 1.5HP motor, the RPM of this model is 1400 and the CFM is 12.

DOS and Windows software is included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Dual scale, Hg and KPA. Factory calibrated for accuracy. Dial is 2-5/8" in diameter, and gauge is threaded for 1/4” NPT bottom mount and...

The CFM's listed indicate the pump's performance at sea level at 68 degrees at the vacuum level given. Kaeser Tri-Lobe Style Vacuum Pumps have improved vacuum-producing technology for reduced pressure pulsations and lower noise levels.

The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Fits assemblies with 7.5 to 10 HP pump. Straight Silencer with 2.5" NPT.

Vacum Pre-Air Filter with 6" pump connection for 4" single or duble vacuum line . A plug is included to seal off the unneeded outlet in single configuration. Pre-Filters are made of l-1/2” thick PVC construction and are absolutely moisture-proof, rust-proof,...

Coburn Molded Poly Vacuum Pre-Filters are more economical than PVC and very sanitary as they have the advantage of being molded in one piece, eliminating the crevices that could trap dirt and germs.

Replacement End Cap for 15" tank with three 3" inlets.

The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1250 and the CFM is 17.

Replacement filters available. The Separate Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf).

Replacement End Cap for 15" tank with 1-1/4" drain opening.

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. Featuring a serial port and a variety of additional internal features, the Digimet...

Anti-reversing valve has a rubber cap and comes with a hose clamp to fit 1.5 - 2" openings.

37' OVERALL LENGTH + TONGUE, 102" WIDTH, 6-AXLE, 3 FRONT AXLES STEERABLE, 12 WHEELS, SELF CONTAINED KOHLER DIESEL WITH MASPORT PUMP, 18'X7' ROUND TANK, 32' HOSE RACKS, 5' STEEL TOOL BOX ON PASSENGER SIDE

Kit includes Gauge, pipe nipple, elbow, coupling and instructions. Vacuum Gauge has stainless steel case and is glycerine-filled to cushion against vibration. Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance,...

Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Fits assemblies with 50 to 60 HP pump. Straight Silencer with 8" NPT.