Vacuum Regulation Monitoring Vacuum Components For Sale In Utah

Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min. At 50 kPa (49 cfm at 15" Hg.)

Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. Replacement foam filter sold separately. The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable...

Glycerine fill assures accuracy by providing a cushion against vibration. Gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Factory calibrated for accuracy.

May be adjusted between 10" and 15". Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

For systems with CFM's over 250, two are recommended. Part number "348-17" on schematic diagram. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum.

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

May be adjusted between 10" and 15". The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

Part number "348-36" on schematic diagram.

Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) . Regulator has two washable replaceable filters. Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations.

Part number "348-35" on schematic diagram.

Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. Replacement foam filter sold separately. The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable...

DOS and WindowsA software isA included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

Nickel-plated clamp-style Angle Stall Cock fits up to 11/4 to 11/2 OD vacuum pipe. Washer included.

Pre-Air Filters are packaged in 350-lb. A plug is included to seal off the unneeded outlet in single configuration. Pre-Air Filters for Double or Single Vacuum Line include automatic drain valve assembly, gasketed removable lid, stainless steel screen,...

Kaeser Pump Oil is a special synthetic oil especially recommended for Kaeser pumps. It requires changing much less often than ordinary petroleum-based oils.

Straight Silencer with 2.5" NPT. Fits assemblies with 7.5 to 10 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately.

37' OVERALL LENGTH + TONGUE, 102" WIDTH, 6-AXLE, 3 FRONT AXLES STEERABLE, 12 WHEELS, SELF CONTAINED KOHLER DIESEL WITH MASPORT PUMP, 18'X7' ROUND TANK, 32' HOSE RACKS, 5' STEEL TOOL BOX ON PASSENGER SIDE

Sized to fit all sizes of PVC or stainless steel tubing. A quality product at a reasonable price, with a guaranteed not to leak vacuum. Die-cast, rust-free metal construction. Fits Strangko, Bou-Matic, Schlueter and Westfalia electric pulsators.

Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum. In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level.

Pre-Air Filters are packaged in 350-lb. A plug is included to seal off the unneeded outlet in single configuration. Pre-Air Filters for Double or Single Vacuum Line include automatic drain valve assembly, gasketed removable lid, stainless steel screen,...

Replacement Lid Gasket for Pre-Filters 160201, 160206, 160208, 160237 and 160238

Stall Cock Repair Kit includes 2 long screw, 1 o-ring, 1 short screw, 2 insulating washer, 6 brass washers, 2 stall cock inserts, and 1 ball.

Five-gallon pail. Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

Dial is 2-5/8" in., and gauge is threaded for 1/4" NPT back mount with a stainless steel cover. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.