Vacuum Regulation Monitoring Vacuum Components For Sale In San Antonio

This is the Spanish-language version with instructions, labels and readout in Spanish. Featuring a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator...

Featuring ABS housings and top dome and main filter, the Mark II may be adjusted between 10" and 15". 2" Female NPT mounting connections. The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and...

Dial is 3-7/8" in. Glycerine fill assures accuracy by providing a cushion against vibration. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

Safety Valve for Stabilvac Seperate styles.

4” x 4” x 2” unit prints characters and graphics on a strip of paper. Includes cables, paper roll, and AC transformer.

Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min. At 50 kPa (49 cfm at 15" Hg.)

Dial is 2-5/8" in., and gauge is threaded for 1/4" NPT back mount with a stainless steel cover. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

Features a dual scale for inches Mercury (Hg) or kPa. Basic Digimet 3000 includes readout unit with preloaded computer programs, serial cable, miscellaneous fittings, case and carrying strap.

Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise...

Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) . Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations.

Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum. In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level.

Large 5" diameter dial is easy to read at a distance, and gauge has stainless steel cover and is threaded for 1/4” NPT bottom mount. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

Replacement Foam Filter for 173-02010 Vacuum Regulator. Two filters required.

Part number "348-28" on schematic diagram.

Please note: Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation, and many other factors. Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts...

Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread. Fine quality--economically priced

Replacement Filter Cartridge for Fresh Air.

This separate-style regulator, which divides the servo valve and the main control valve into two parts as shown, is recommended for vacuum pumps from 35 to 106 cfm (1,000 to 3,000 liters/min) and will maintain vacuum from 10” to 15” Hg (34 to 50 kPa).

Part number "348-35" on schematic diagram.

Please note: Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation, and many other factors. Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts...

Relief Valve safeguards the system against high vacuum incidents. For Sentinel models MKII and M100.

Kit includes Gauge, pipe nipple, elbow, coupling and instructions. Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance, kit installs on Omega Vacuum Pumps or any pump with 1/4” opening.

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

• 303 Stainless Steel Shaft. • USDA Epoxy Finish. • Works with most competing milk pumps - C-Face. • Drains in End shield. 1/2 HP Leeson Washguard Motor tm motors are designed and built for extended life in the wet, humid environment of the dairy.

Part number "348-36" on schematic diagram.

Nickel-plated clamp-style Angle Stall Cock fits up to 11/4 to 11/2 OD vacuum pipe. Washer included.

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.