Vacuum Regulation Monitoring Vacuum Components For Sale In Pennsylvania

Part number "348-36" on schematic diagram.

In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level. Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum.

This regulator is recommended for vacuum pumps from 35 to 70 cfm (1,000 to 2,000 liters/min) and will maintain vacuum from 11” to 15” Hg (36 to 50 kPa). The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme...

3" Female NPT mounting connections. Overall dimensions 7" in diameter and 12.5" high. May be adjusted between 10" and 15". The Model 500 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 500 CFM ASME and features...

Part number "353-06" on schematic diagram.

Part number "348-35" on schematic diagram.

Replacement foam filter sold separately. Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable...

Part number "348-17" on schematic diagram. For systems with CFM's over 250, two are recommended. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum.

Glycerine fill assures accuracy by providing a cushion against vibration. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

2" Female NPT mounting connections. Overall dimensions 6" in diameter and 11-1/4" high. Featuring ABS housings and top dome and main filter, the Mark II may be adjusted between 10" and 15".

Replacement foam filter sold separately. Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable...

Featuring a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

This regulator is recommended for vacuum pumps from 106 to 159 cfm (3,000 to 4,500 liters/min) and will maintain vacuum from 10” to 15” Hg (36 to 50 kPa). The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with...

3" Female NPT mounting connections. Overall dimensions 7" in diameter and 12.5" high. May be adjusted between 10" and 15". The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features...

Fine quality--economically priced Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread.

Fits assemblies with 50 to 60 HP pump. Straight Silencer with 8" NPT. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately.

At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1250 and the CFM is 17. There is about 4 CFM needed per cow. Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many...

Please note: Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation, and many other factors. When supporting a vacuum level of 13.5", it spins at 4735 RPM at 82% speed, moves 116 CFM and has a noise level...

Quart weighs 2.5 lbs. Rust-inhibiting and will not form sludge. Non-foaming Vacuum Pump Oil flows freely even at low temperatures.

Replacement Lid Gasket for Pre-Filters 160201, 160206, 160208, 160237 and 160238

The RDY series combination chamber absorptive-type discharge silencer is replaceable, if necessary. For more information regarding capacities and applications, please contact our experienced sales staff or see Kaeser Bare Pump Head description.

Please note: Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation, and many other factors. When supporting a vacuum level of 13.5", it spins at 4209 RPM at 85% speed, moves 252 CFM and has a noise level...

Washguard motors meet all applicable UL and CSA standards. 3HP with a 7/8" shaft in a stainless steel finish, three phase, 145TC frame, 208-230/460 voltage, and 3600 RPM. They feature type 303 stainless steel shafts, drains in end shield, moisture-resistant...

If standard sizes are not suitable, we will customize a tank for you. Specify length (up to 12 ft.) and number, size and placement of openings. End caps feature four inch solvent-weld and are domed for strength.

Replacement End Cap for 15" tank with one 3" inlet

This separate-style regulator, which divides the servo valve and the main control valve into two parts as shown, is recommended for vacuum pumps from 106 to 159 cfm (3,000 to 4,500 liters/min) and will maintain vacuum from 11” to 15” Hg (36 to 50...

Dimensions 10-7/8"W by 18"L by 5/16". Replacement Stainless Steel screen for old-style Pre-Air Filters.