Vacuum Regulation Monitoring Vacuum Components For Sale In New Jersey

DOS and Windows software is included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

Features a dual scale for inches Mercury (Hg) or kPa. Basic Digimet 3000 includes readout unit with preloaded computer programs, serial cable, miscellaneous fittings, case and carrying strap.

Gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Factory calibrated for accuracy. Glycerine fill assures accuracy by providing a cushion against vibration.

Overall dimensions 7" in diameter and 12.5" high. May be adjusted between 10" and 15". The Model 500 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 500 CFM ASME and features direct sensing that is sensitive to...

This regulator is recommended for vacuum pumps from 35 to 70 cfm (1,000 to 2,000 liters/min) and will maintain vacuum from 11” to 15” Hg (36 to 50 kPa). The design allows for quick installation, and the unit can be cleaned and serviced in less than...

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

Complete Digimet 3000 features a dual scale for inches Mercury (Hg) or kPa and includes readout unit with preloaded computer programs, cables, printer, battery pack, miscellaneous fittings, and carrying case--everything needed to print out data in the...

Glycerine fill assures accuracy by providing a cushion against vibration. Dual scale, Hg and KPA. Dial is 2-5/8" in diameter, and gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover.

Overall dimensions 5" in diameter and 12" high. May be adjusted between 10" and 15". Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1"...

Safety Valve for Stabilvac Seperate styles.

Includes cables, paper roll, and AC transformer. 4” x 4” x 2” unit prints characters and graphics on a strip of paper.

DOS and Windows software is included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

Part number "348-28" on schematic diagram.

Fine quality--economically priced Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread.

Part number "348-36" on schematic diagram.

Please note: Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation, and many other factors. Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts...

Straight Silencer with 6" NPT. Fits assemblies with 30 or 40 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately.

This regulator is recommended for vacuum pumps from 106 to 159 cfm (3,000 to 4,500 liters/min) and will maintain vacuum from 10” to 15” Hg (36 to 50 kPa). The design allows for quick installation, and the unit can be cleaned and serviced in less than...

Straight Silencer with 2.5" NPT. Fits assemblies with 7.5 to 10 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately.

Measuring only 32" long x 21" wide x 37" high and weighing 450 lbs., the 10HP Kaeser Compact is shipped fully assembled complete with Kaeser Tri-Lobe pump, stand, belt guard, silencer, drive package and remote oil drain.

Double-wall corrugated box with expanded polystyrene corner pads. Vacum Pre-Air Filter with 4" pump connection for 3" single or duble vacuum line . Pre-Air Filters are packaged in 350-lb.

Please note: Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation, and many other factors. Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts...

3HP with a 7/8" shaft in a stainless steel finish, three phase, 145TC frame, 208-230/460 voltage, and 3600 RPM. They feature type 303 stainless steel shafts, drains in end shield, moisture-resistant interior coatings, stainless steel screws and full-fact...

Double-wall corrugated box with expanded polystyrene corner pads. Vacum Pre-Air Filter with 6" pump connection for 6" single or duble vacuum line . Pre-Air Filters are packaged in 350-lb.

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

Rust-inhibiting and will not form sludge. Gallon weighs 8 lbs. Non-foaming Vacuum Pump Oil flows freely even at low temperatures.

Dimensions 10-7/8"W by 18"L by 5/16". Replacement Stainless Steel screen for old-style Pre-Air Filters.