Vacuum Regulation Monitoring Vacuum Components For Sale In New Hampshire

For Sentinel models MKII and M100. Relief Valve safeguards the system against high vacuum incidents.

In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level. Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum.

At 50 kPa (49 cfm at 15" Hg.) Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min.

FeaturingA a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Featuring a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. This separate-style regulator, which divides the servo valve and the main control valve into two parts as shown, is recommended for vacuum pumps...

Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) .

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. Complete Digimet 3000 features a dual scale for inches Mercury (Hg) or kPa and includes...

Safety Valve for Stabilvac Seperate styles.

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. This separate-style regulator, which divides the servo valve and the main control valve into two parts as shown, is recommended for vacuum pumps...

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. This regulator is recommended for vacuum pumps from 12 to 35 cfm (350 to 1,000 liters/min) and will maintain vacuum from 10” to 15” Hg (36...

Includes cables, paper roll, and AC transformer. 4” x 4” x 2” unit prints characters and graphics on a strip of paper.

Fits Sentinel 100, 350, 500 Vacuum controllers. Part number "348-33" on schematic diagram.

Part number "348-35" on schematic diagram.

Dual scale, Hg and KPA. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Factory calibrated for accuracy. Dial is 2-5/8" in diameter, and gauge is threaded for 1/4” NPT bottom mount and...

The Model 500 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 500 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. For systems with CFM's over 250, two are recommended. Part number "348-17" on schematic diagram.

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 4" NPT. Fits assemblies with 20 to 25 HP pump.

Washer included. Nickel-plated clamp-style Angle Stall Cock fits up to 11/4 to 11/2 OD vacuum pipe.

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. Features a dual scale for inches Mercury (Hg) or kPa. Basic Digimet 3000 includes...

Glycerine fill assures accuracy by providing a cushion against vibration. Gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Dial is 3-7/8" in. Dual scale, Hg and KPA.

Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts Perfectly matched timing gears Reliable splash lubrication Dependable sealing Quality German design and manufacturing 24-Month Warranty against...

Straight Brass Stall Cock; 3/8" thread.

Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 8" NPT. Fits assemblies with 50 to 60 HP pump.

Replacement Filter Cartridge for Fresh Air.