Vacuum Regulation Monitoring Vacuum Components For Sale In Nevada

Safety Valve for Stabilvac Seperate styles.

Overall dimensions 5" in diameter and 12" high. Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Relief Valve safeguards the system against high vacuum incidents. For Sentinel models MKII and M100.

Glycerine fill assures accuracy by providing a cushion against vibration. Dial is 2-5/8" in diameter, and gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover.

Replacement foam filter sold separately. The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. Featuring a serial port and a variety of additional internal features, the Digimet...

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. Replacement filters available. This separate-style regulator, which divides the servo valve and the main control valve into two parts as shown,...

Part number "348-33" on schematic diagram. Fits Sentinel 100, 350, 500 Vacuum controllers.

Replacement foam filter sold separately. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Overall dimensions 7" in diameter and 12.5" high. The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Part number "348-17" on schematic diagram. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. For systems with CFM's over 250, two are recommended.

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. Replacement filters available. This separate-style regulator, which divides the servo valve and the main control valve into two parts as shown,...

Gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum. In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level.

Fits assemblies with 50 to 60 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 8" NPT.

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. Replacement filters available. This regulator is recommended for vacuum pumps from 106 to 159 cfm (3,000 to 4,500 liters/min) and will maintain...

Fits assemblies with 20 to 25 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 4" NPT.

Double-wall corrugated box with expanded polystyrene corner pads. Vacum Pre-Air Filter with 6" pump connection for 6" single or duble vacuum line . Pre-Air Filters are packaged in 350-lb.

Features a dual scale for inches Mercury (Hg) or kPa. Basic Digimet 3000 includes readout unit with preloaded computer programs, serial cable, miscellaneous fittings, case and carrying strap.

Double-wall corrugated box with expanded polystyrene corner pads. .Vacum Pre-Air Filter with 4" pump connection for 4" single or duble vacuum line . Pre-Air Filters are packaged in 350-lb.

There is about 4 CFM needed per cow. Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation and many other factors. At sea level at a temperature of 68F , with a 3HP motor, the RPM of this model is 900 and...

Stall Cock Repair Kit includes 2 long screw, 1 o-ring, 1 short screw, 2 insulating washer, 6 brass washers, 2 stall cock inserts, and 1 ball.

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

Fits assemblies with 15 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 3" NPT.

Quart weighs 2.5 lbs. Non-foaming Vacuum Pump Oil flows freely even at low temperatures. Rust-inhibiting and will not form sludge.

Replacement Stainless Steel screen for Pre-Air Filters 160201, 160206, 160208, 160237 and 160238. Dimensions are 11.5"W by 18.5"L by 3/8".

• Works with most competing milk pumps - C-Face. • 303 Stainless Steel Shaft. 1-1/2 HP Leeson Washguard Motor tm motors are designed and built for extended life in the wet, humid environment of the dairy.