Vacuum Regulation Monitoring Vacuum Components For Sale In Mississippi

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

Replacement foam filter sold separately. The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Regulator has two washable replaceable filters. Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) .

3" Female NPT mounting connections. Overall dimensions 7" in diameter and 12.5" high. The Model 500 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 500 CFM ASME and features direct sensing that is sensitive to...

Relief Valve safeguards the system against high vacuum incidents. For Sentinel models MKII and M100.

Replacement foam filter sold separately. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

2" Female NPT mounting connections. Overall dimensions 6" in diameter and 11-1/4" high. The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1"...

Featuring a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Dial is 2-5/8" in diameter, and gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover.

Safety Valve for Stabilvac Seperate styles.

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

Part number "348-28" on schematic diagram.

At sea level at a temperature of 68F, with a 1.5HP motor, the RPM of this model is 1400 and the CFM is 12. There is about 4 CFM needed per cow. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve.

Please call to take advantage of our Computer-Assisted Pump Sizing Program, which considers all the variables and recommends the right size pump for the job. Other fine features include...

Featuring a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

Fits assemblies with 5 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 2" NPT.

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

The Kaeser OMEGA22P is a 7.5HP vacuum pump that weighs 84 lbs. Please note: Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation, and many other factors.

Please call to take advantage of our Computer-Assisted Pump Sizing Program, which considers all the variables and recommends the right size pump for the job. Other fine features include...

FeaturingA a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

Part number "348-33" on schematic diagram. Fits Sentinel 100, 350, 500 Vacuum controllers.

Replacement Stainless Steel screen for Pre-Air Filters 160201, 160206, 160208, 160237 and 160238. Dimensions are 11.5"W by 18.5"L by 3/8".

Coburn Molded Poly Vacuum Pre-Filters are more economical than PVC and very sanitary as they have the advantage of being molded in one piece, eliminating the crevices that could trap dirt and germs.

Stabilvac 6000 Monoblock Regulators weighs 3 lbs. Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain...

Kaeser Pump Oil is a special synthetic oil especially recommended for Kaeser pumps. It requires changing much less often than ordinary petroleum-based oils.

Replacement 12" Cover for Pre-Filters 160201, 160206, 160208, 160237 and 160238.

Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.