Vacuum Regulation Monitoring Vacuum Components For Sale In Kansas

In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level. Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum.

Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Dual scale, Hg and KPA. Factory calibrated for accuracy. Glycerine fill assures accuracy by providing a cushion against vibration.

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

Overall dimensions 5" in diameter and 12" high. Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

For Sentinel models MKII and M100. Relief Valve safeguards the system against high vacuum incidents.

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. Depending on the model, the Monobloc Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow...

Features a dual scale for inches Mercury (Hg) or kPa. Basic Digimet 3000 includes readout unit with preloaded computer programs, serial cable, miscellaneous fittings, case and carrying strap.

DOS and Windows software is included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. The Separate Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223...

Glycerine fill assures accuracy by providing a cushion against vibration. Factory calibrated for accuracy. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

Includes cables, paper roll, and AC transformer. 4” x 4” x 2” unit prints characters and graphics on a strip of paper.

Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts Perfectly matched timing gears Reliable splash lubrication Dependable sealing Quality German design and manufacturing 24-Month Warranty against...

Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts Perfectly matched timing gears Reliable splash lubrication Dependable sealing Quality German design and manufacturing 24-Month Warranty against...

At 50 kPa (49 cfm at 15" Hg.) Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min.

Straight Brass Stall Cock; 3/8" thread.

Washer included. Nickel-plated clamp-style Angle Stall Cock fits up to 11/4 to 11/2 OD vacuum pipe.

Complete Digimet 3000 features a dual scale for inches Mercury (Hg) or kPa and includes readout unit with preloaded computer programs, cables, printer, battery pack, miscellaneous fittings, and carrying case--everything needed to print out data in the...

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. At sea level at a temperature of 68F , with a 3HP motor, the RPM of this model is 900 and the CFM is 32.

Fine quality--economically priced Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread.

There is about 4 CFM needed per cow. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many other factors.

Quart weighs 2.5 lbs. Rust-inhibiting and will not form sludge. Non-foaming Vacuum Pump Oil flows freely even at low temperatures.

Dimensions are 11.5"W by 18.5"L by 3/8". Replacement Stainless Steel screen for Pre-Air Filters 160201, 160206, 160208, 160237 and 160238.

Fits assemblies with 50 to 60 HP pump. Straight Silencer with 8" NPT. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately.

Threaded Style screws directly into the tubing so no clamp is required. For use with Strangko, Bou-Matic, Schlueter and Westfalia electric pulsators. A quality product at a reasonable price, with a guaranteed not to leak vacuum.

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. Stabilvac Seperate 6000 weighs 3 lbs. The Separate Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18”...

Angle Brass Stall Cock; 3/8" thread.

Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts Perfectly matched timing gears Reliable splash lubrication Dependable sealing Quality German design and manufacturing 24-Month Warranty against...