Vacuum Regulation Monitoring Vacuum Components For Sale In Indianapolis

Part number "353-06" on schematic diagram.

Replacement foam filter sold separately. The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Replacement foam filter sold separately. The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Glycerine fill assures accuracy by providing a cushion against vibration. Dual scale, Hg and KPA. Factory calibrated for accuracy. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

Replacement filters available. The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability. This separate-style regulator, which divides the servo valve and the main control valve into...

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. Featuring a serial port and a variety of additional internal features, the Digimet...

Glycerine fill assures accuracy by providing a cushion against vibration. Dual scale, Hg and KPA. Factory calibrated for accuracy. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

At 50 kPa (49 cfm at 15" Hg.) Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min.

Safety Valve for Stabilvac Seperate styles.

Glycerine fill assures accuracy by providing a cushion against vibration. Dual scale, Hg and KPA. Factory calibrated for accuracy. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

Replacement filters available. The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability. This regulator is recommended for vacuum pumps from 35 to 70 cfm (1,000 to 2,000 liters/min)...

Replacement filters available. The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability. This regulator is recommended for vacuum pumps from 12 to 35 cfm (350 to 1,000 liters/min) and...

Part number "348-17" on schematic diagram. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. For systems with CFM's over 250, two are recommended.

In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level. Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum.

Replacement filters available. The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability. This separate-style regulator, which divides the servo valve and the main control valve into...

Part number "348-28" on schematic diagram.

Part number "348-11" on schematic diagram.

Straight Brass Stall Cock; 3/8" thread.

For Sentinel models MKII and M100. Relief Valve safeguards the system against high vacuum incidents.

There is about 4 CFM needed per cow. At sea level at a temperature of 68F , with a 3HP motor, the RPM of this model is 900 and the CFM is 32. Weighs 121 Lbs. At sea level at a temperature of 68F , with a 4HP motor, the RPM of this model is 1200 and the...

The CFM's listed indicate the pump's performance at sea level at 68 degrees at the vacuum level given. When supporting a vacuum level of 13.5", it spins at 4735 RPM at 82% speed, moves 116 CFM and has a noise level of 88 dB.

Replacement Filter Cartridge for Fresh Air.

Quart weighs 2.5 lbs. Non-foaming Vacuum Pump Oil flows freely even at low temperatures. Rust-inhibiting and will not form sludge.

Includes Filter cover, cartridge and base. Adapter kits are available for Bou-Matic, Surge, Westfalia and Strangko. Use with a standard automotive-type filter. With dusty conditions there is only one way to guarantee that pulsators get the clean air that...

Fits assemblies with 50 to 60 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 8" NPT.

The CFM's listed indicate the pump's performance at sea level at 68 degrees at the vacuum level given. When supporting a vacuum level of 13.5", it spins at 4209 RPM at 85% speed, moves 252 CFM and has a noise level of 90 dB.