Vacuum Regulation Monitoring Vacuum Components For Sale In Detroit

Featuring a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

3" Female NPT mounting connections. May be adjusted between 10" and 15". Overall dimensions 7" in diameter and 12.5" high. The Model 500 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 500 CFM ASME and features...

Fits Sentinel 100, 350, 500 Vacuum controllers. Part number "348-33" on schematic diagram.

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

3" Female NPT mounting connections. May be adjusted between 10" and 15". Overall dimensions 7" in diameter and 12.5" high. The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features...

Two filters required. Replacement Foam Filter for 173-02010 Vacuum Regulator.

This regulator is recommended for vacuum pumps from 35 to 70 cfm (1,000 to 2,000 liters/min) and will maintain vacuum from 11” to 15” Hg (36 to 50 kPa). The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme...

Dial is 2-5/8" in., and gauge is threaded for 1/4" NPT back mount with a stainless steel cover. Factory calibrated for accuracy. Glycerine fill assures accuracy by providing a cushion against vibration.

Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many other factors. At sea level at a temperature of 68F, with a 3HP motor, the RPM of this model is 1250 and the CFM is 26.

2" Female NPT mounting connections. Featuring ABS housings and top dome and main filter, the Mark II may be adjusted between 10" and 15". Overall dimensions 6" in diameter and 11-1/4" high.

Part number "348-36" on schematic diagram.

Angle Brass Stall Cock; 3/8" thread.

Fine quality--economically priced Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread.

Please note: Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation, and many other factors. When supporting a vacuum level of 13.5", it spins at 4735 RPM at 82% speed, moves 116 CFM and has a noise level...

Dimensions are 11.5"W by 18.5"L by 3/8". Replacement Stainless Steel screen for Pre-Air Filters 160201, 160206, 160208, 160237 and 160238.

Please note: Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation, and many other factors. When supporting a vacuum level of 13.5", it spins at 3574 RPM at 79% speed, moves 317 CFM and has a noise level...

Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Glycerine fill assures accuracy by providing a cushion against vibration.

Rust-inhibiting and will not form sludge. Non-foaming Vacuum Pump Oil flows freely even at low temperatures. Quart weighs 2.5 lbs.

Part number "348-35" on schematic diagram.

Pre-Air Filters for Double or Single Vacuum Line include automatic drain valve assembly, gasketed removable lid, stainless steel screen, and washable filter with baffle. A plug is included to seal off the unneeded outlet in single configuration.

Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation and many other factors. At sea level at a temperature of 68F , with a 4HP motor, the RPM of this model is 1200 and the CFM is 35.

For Sentinel models MKII and M100. Relief Valve safeguards the system against high vacuum incidents.

It requires changing much less often than ordinary petroleum-based oils. Kaeser Pump Oil is a special synthetic oil especially recommended for Kaeser pumps.

Fine quality--economically priced Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread.

This regulator is recommended for vacuum pumps from 106 to 159 cfm (3,000 to 4,500 liters/min) and will maintain vacuum from 10” to 15” Hg (36 to 50 kPa). The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with...

Five-gallon pail. Coburn Vacuum Pump Cleaner contains a rust inhibitor to protect the pump from rust and corrosion.

Safety Valve for Stabilvac Seperate styles.