Vacuum Regulation Monitoring Vacuum Components For Sale In Baltimore

3" Female NPT mounting connections. The Model 500 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 500 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Glycerine fill assures accuracy by providing a cushion against vibration. Dual scale, Hg and KPA. Gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Vacuum gauges assure accurate readings of line vacuum and provide constant...

At 50 kPa (49 cfm at 15" Hg.) Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min.

Glycerine fill assures accuracy by providing a cushion against vibration. Dual scale, Hg and KPA. Factory calibrated for accuracy. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

For Sentinel models MKII and M100. Relief Valve safeguards the system against high vacuum incidents.

The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Fits Sentinel 100, 350, 500 Vacuum controllers. Part number "348-33" on schematic diagram.

The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations. Regulator has two washable replaceable filters. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) .

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. This separate-style regulator, which divides the servo valve and the main control valve into two parts as shown, is recommended for vacuum pumps...

DOS and WindowsA software isA included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. This regulator is recommended for vacuum pumps from 12 to 35 cfm (350 to 1,000 liters/min) and will maintain vacuum from 10” to 15” Hg (36...

Glycerine fill assures accuracy by providing a cushion against vibration. Dual scale, Hg and KPA. Factory calibrated for accuracy. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

Glycerine fill assures accuracy by providing a cushion against vibration. Dual scale, Hg and KPA. Factory calibrated for accuracy. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts Perfectly matched timing gears Reliable splash lubrication Dependable sealing Quality German design and manufacturing 24-Month Warranty against...

DOS and Windows software is included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

Part number "348-35" on schematic diagram.

Please call to take advantage of our Computer-Assisted Pump Sizing Program, which considers tall the variables and recommends the right size pump for the job. The CFM's listed indicate the pump's performance at sea level at 68 degrees at the vacuum level...

In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level. Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum.

Specify length (up to 12 ft.) and number, size and placement of openings. If standard size is not suitable, we will customize a tank for you. Mounting kit and 11/2” drain are included.

Double-wall corrugated box with expanded polystyrene corner pads. Pre-Air Filters for Double or Single Vacuum Line include automatic drain valve assembly, gasketed removable lid, stainless steel screen, and washable filter with baffle.

2" Female NPT mounting connections. The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Replacement Lid Gasket for Pre-Filters 160201, 160206, 160208, 160237 and 160238

Part number "348-28" on schematic diagram.

Dimensions are 11.5"W by 18.5"L by 3/8". Replacement Stainless Steel screen for Pre-Air Filters 160201, 160206, 160208, 160237 and 160238.