Replacement filters available. Stable and reliable vacuum is essential to the consistent operation of the milking system and to maximize animal health and milk production, especially in new, high airflow milking systems.
The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. DOS and Windows software is included to allow numerical and waveform data to be named,...
The Model 500 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 500 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.
Featuring a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.
The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.
Replacement filters available. Stable and reliable vacuum is essential to the consistent operation of the milking system and to maximize animal health and milk production, especially in new, high airflow milking systems.
Factory calibrated for accuracy. Dual scale, Hg and KPA. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Dial is 2-5/8" in., and gauge is threaded for 1/4" NPT back mount with a stainless...
The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.
Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. Part number "348-17" on schematic diagram. For systems with CFM's over 250, two are recommended.
The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.
The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.
Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Fits assemblies with 7.5 to 10 HP pump. Straight Silencer with 2.5" NPT.
The Coburn Compact featuring the Kaeser Tri-Lobe Vacuum Pump is a vacuum pump assembly occupying a minimum amount of space in the milking barn or parlor. Measuring only 32" long x 21" wide x 37" high and weighing 285 lbs., the 10HP Kaeser Compact is shipped...
Transflow Vacuum Tubing significantly outperforms rubber. 3/8" ID, 5/8" OD, 13 lbs. Features a smooth, non-porous inner wall for easy cleaning and dependable air flow. It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays...
160219, black transflow hose, and 90 degree elbow. Use with a standard automotive-type filter. Adapter kits are available for Bou-Matic, Surge, Westfalia and Strangko. With dusty conditions there is only one way to guarantee that pulsators get the clean...
Our low-cost, quick-mount Fresh Air Filter is attached directly to 3” PVC pipe and can handle six pulsators. Features green plastic body with replaceable foam filter.
Transflow Twin Vacuum Tubing significantly outperforms rubber. 1/4" ID, 1/2" OD, 18 lbs. Features two tandem tubes with a smooth, non-porous inner wall for easy cleaning and dependable air flow.
The L02 is adjustable from 50 to 180 ppm over a vacuum range of 35 to 50 kPa (10 to 15 hg), and the rate adjusting screw is positioned for easy access without damage to the pulsator body.
Transflow Vacuum Tubing significantly outperforms rubber. 3/8" ID, 5/8" OD, 13 lbs. Features a smooth, non-porous inner wall for easy cleaning and dependable air flow. It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays...
The L02 is adjustable from 50 to 180 ppm over a vacuum range of 35 to 50 kPa (10 to 15 hg), and the rate adjusting screw is positioned for easy access without damage to the pulsator body.
Silicone Twin Vacuum Tubing is absolutely sanitary and, due to tightly bonded non-reactive pure resins, unaffected by milk fat or bacteria. Twin 1/4" ID & 1/8" Wall, 25 lbs. Stays transparent and resilient longer than plastic tubing.
Transflow Twin Vacuum Tubing significantly outperforms rubber. 3/8" ID, 5/8" OD, 25 lbs. Features two tandem tubes with a smooth, non-porous inner wall for easy cleaning and dependable air flow.
