Vacuum Regulation Monitoring Milking Equipment For Sale In North Dakota

Replacement Foam Filter for 173-02010 Vacuum Regulator. Two filters required.

Part number "348-36" on schematic diagram.

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. Replacement filters available. Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares...

Overall dimensions 7" in diameter and 12.5" high. May be adjusted between 10" and 15". The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to...

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. Features a dual scale for inches Mercury (Hg) or kPa. Basic Digimet 3000 includes...

Overall dimensions 6" in diameter and 11-1/4" high. Featuring ABS housings and top dome and main filter, the Mark II may be adjusted between 10" and 15". The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed...

Glycerine fill assures accuracy by providing a cushion against vibration. Large 5" diameter dial is easy to read at a distance, and gauge has stainless steel cover and is threaded for 1/4” NPT bottom mount.

Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. Replacement foam filter sold separately. The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable...

Glycerine fill assures accuracy by providing a cushion against vibration. Dial is 2-5/8" in diameter, and gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover.

Glycerine fill assures accuracy by providing a cushion against vibration. Dial is 2-5/8" in., and gauge is threaded for 1/4" NPT back mount with a stainless steel cover. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring...

Gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Factory calibrated for accuracy. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread. Fine quality--economically priced

Straight Silencer with 4" NPT. Fits assemblies with 20 to 25 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately.

Straight Silencer with 6" NPT. Fits assemblies with 30 or 40 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately.

Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. Replacement foam filter sold separately. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable...

Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts Perfectly matched timing gears Reliable splash lubrication Dependable sealing Quality German design and manufacturing 24-Month Warranty against...

The success of the L02 is due in part to the state-of-the-art materials and the design of the valve plate and the slide which work together seamlessly and smoothly. The main diaphragm is now molded of a new compound which is virtually impermeable, resists...

Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum. In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level.

Twin 3/8" ID, 1/8" Wall, 28 lbs. Black Twin tubing has good flexibility and resistance to kinking, tears and splits.

5/8" ID single clear plastic (blue tinted) Glitex Tubing for milk and vacuum lines.

1/4" ID, 1/2" OD, 18 lbs. It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays flexible over time and in all types of climate conditions. Transflow Twin Vacuum Tubing significantly outperforms rubber.

The success of the L02 is due in part to the state-of-the-art materials and the design of the valve plate and the slide which work together seamlessly and smoothly. The main diaphragm is now molded of a new compound which is virtually impermeable, resists...

7/16" ID, 11/16" OD, 14 lbs. It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays flexible over time and in all types of climate conditions. Transflow Vacuum Tubing significantly outperforms rubber.

All Kaeser Vacuum Pumps feature... Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts Perfectly matched timing gears Reliable splash lubrication Dependable sealing Quality German design and...

Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts Perfectly matched timing gears Reliable splash lubrication Dependable sealing Quality German design and manufacturing 24-Month Warranty against...

Measuring only 32" long x 21" wide x 37" high and weighing 285 lbs., the 10HP Kaeser Compact is shipped with Kaeser Tri-Lobe pump, stand, belt guard, silencer, drive package and remote oil drain.