Vacuum Regulation Monitoring Milking Equipment For Sale In New Jersey

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum. In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level.

DOS and Windows software is included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

The Separate Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf). Stabilvac Seperate 6000 weighs 3 lbs.

Overall dimensions 6" in diameter and 11-1/4" high. The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Overall dimensions 7" in diameter and 12.5" high. The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

4” x 4” x 2” unit prints characters and graphics on a strip of paper. Includes cables, paper roll, and AC transformer.

Part number "353-06" on schematic diagram.

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

Relief Valve safeguards the system against high vacuum incidents. For Sentinel models MKII and M100.

Replacement Foam Filter for 173-02010 Vacuum Regulator. Two filters required.

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. Complete Digimet 3000 features a dual scale for inches Mercury (Hg) or kPa and includes...

DOS and Windows software is included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

Measuring only 32" long x 21" wide x 37" high and weighing 450 lbs., the 10HP Kaeser Compact is shipped fully assembled complete with Kaeser Tri-Lobe pump, stand, belt guard, silencer, drive package and remote oil drain.

Gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Dual scale, Hg and KPA. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection.

3/8" ID, 5/8" OD, 25 lbs. Transflow Twin Vacuum Tubing significantly outperforms rubber. Features two tandem tubes with a smooth, non-porous inner wall for easy cleaning and dependable air flow.

1/4" ID, 1/2" OD, 18 lbs. Transflow Twin Vacuum Tubing significantly outperforms rubber. Features two tandem tubes with a smooth, non-porous inner wall for easy cleaning and dependable air flow.

1/4" ID, 1/2" OD, 9 lbs. Transflow Vacuum Tubing significantly outperforms rubber. Features a smooth, non-porous inner wall for easy cleaning and dependable air flow. It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays...

Use with a standard automotive-type filter. With dusty conditions there is only one way to guarantee that pulsators get the clean air that enables them to function at peak efficiency.

9/32" ID, 17/32" OD, 20 lbs. Transflow Twin Vacuum Tubing significantly outperforms rubber. Features two tandem tubes with a smooth, non-porous inner wall for easy cleaning and dependable air flow.

9/32" ID, 17/32" OD, 20 lbs. Transflow Twin Vacuum Tubing significantly outperforms rubber. Features two tandem tubes with a smooth, non-porous inner wall for easy cleaning and dependable air flow.

7/16" ID, 11/16" OD, 14 lbs. Transflow Vacuum Tubing significantly outperforms rubber. Features a smooth, non-porous inner wall for easy cleaning and dependable air flow. It is lightweight, resistant to flaking, cracking and aging from oxidation, and...

The success of the L02 is due in part to the state-of-the-art materials and the design of the valve plate and the slide which work together seamlessly and smoothly. Compact and ergonomically rounded for easy handling, the 60/40 ratio, 4-exit L02 is simple...

9/32" ID, 17/32" OD, 20 lbs. Transflow Twin Vacuum Tubing significantly outperforms rubber. Features two tandem tubes with a smooth, non-porous inner wall for easy cleaning and dependable air flow.

1/4" ID, 1/2" OD, 18 lbs. Transflow Twin Vacuum Tubing significantly outperforms rubber. Features two tandem tubes with a smooth, non-porous inner wall for easy cleaning and dependable air flow.

There is about 4 CFM needed per cow. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. At sea level at a temperature of 68F, with a 1.5HP motor, the RPM of this model is 1400 and the CFM is 12.