Vacuum Regulation Monitoring Milking Equipment For Sale In Massachusetts

The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability. Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set...

May be adjusted between 10" and 15". Overall dimensions 5" in diameter and 12" high. 1.5" Female NPT mounting connections. Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct...

Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min. At 50 kPa (49 cfm at 15" Hg.)

Regulator has two washable replaceable filters. Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) .

Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Dial is 2-5/8" in., and gauge is threaded for 1/4" NPT back mount with a stainless steel cover.

Featuring a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

Featuring ABS housings and top dome and main filter, the Mark II may be adjusted between 10" and 15". Overall dimensions 6" in diameter and 11-1/4" high. 2" Female NPT mounting connections.

Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Dial is 2-5/8" in diameter, and gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover.

May be adjusted between 10" and 15". Overall dimensions 7" in diameter and 12.5" high. 3" Female NPT mounting connections. The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features...

Replacement foam filter sold separately. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

4” x 4” x 2” unit prints characters and graphics on a strip of paper. Includes cables, paper roll, and AC transformer.

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

Replacement Foam Filter for 173-02010 Vacuum Regulator. Two filters required.

FeaturingA a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

Replacement foam filter sold separately. The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability. Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set...

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation and many other factors.

Fits assemblies with 20 to 25 HP pump. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Straight Silencer with 4" NPT.

Safety Valve for Stabilvac Seperate styles.

Part number "348-28" on schematic diagram.

Part number "353-06" on schematic diagram.

Quart weighs 2.5 lbs. Non-foaming Vacuum Pump Oil flows freely even at low temperatures. Rust-inhibiting and will not form sludge.

Replacement Filter Cartridge for Fresh Air.

Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Large 5" diameter dial is easy to read at a distance, and gauge has stainless steel cover and is threaded for 1/4” NPT bottom mount.

L80 Interpuls Pulsator with 50:50 ratio now features long-life diaphragm material and smooth synthetic valve plate. Reliable, easily rebuilt, with few moving parts and no fluid, L80 is an economical choice for bucket, parlor or pipeline milking.

Relief Valve safeguards the system against high vacuum incidents. For Sentinel models MKII and M100.

It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays flexible over time and in all types of climate conditions. 1/4" ID, 1/2" OD, 9 lbs. Features a smooth, non-porous inner wall for easy cleaning and dependable air flow.