Vacuum Regulation Monitoring Milking Equipment For Sale In Indiana

May be adjusted between 10" and 15". Model 100 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Dual scale, Hg and KPA. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Factory calibrated for accuracy. Gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover.

May be adjusted between 10" and 15". The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

For systems with CFM's over 250, two are recommended. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. Part number "348-17" on schematic diagram.

Fits Sentinel 100, 350, 500 Vacuum controllers. Part number "348-33" on schematic diagram.

Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) . Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations.

May be adjusted between 10" and 15". The Model 500 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 500 CFM ASME and features direct sensing that is sensitive to 0.1" hg of change in vacuum pressure.

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. This separate-style regulator, which divides the servo valve and the main control valve into two parts as shown, is recommended for vacuum pumps...

Featuring ABS housings and top dome and main filter, the Mark II may be adjusted between 10" and 15". The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 150 CFM ASME and features direct sensing that is sensitive...

Includes cables, paper roll, and AC transformer. 4” x 4” x 2” unit prints characters and graphics on a strip of paper.

The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes. This regulator is recommended for vacuum pumps from 35 to 70 cfm (1,000 to 2,000 liters/min) and will maintain vacuum from 11” to 15” Hg (36...

Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the...

Pump performance, or CFM, varies according to ambient temperature, humidity, air pressure, elevation and many other factors. There is about 4 CFM needed per cow. At sea level at a temperature of 68F, with a 2HP motor, the RPM of this model is 1100 and...

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

Kit contains: O-Ring, Top dome filter, Adjusting knob, Dome diaphragm, Diaphragm assembly, Flange screws (3), Flange assembly, Outlet seal, Rolling seal and Air Filter. Worn Parts Replacement Kit for MK11 Mark II Vacuum Controller.

Compact and ergonomically rounded for easy handling, the 60/40 ratio, 2-exit L02 is simple to install and service takes just a few minutes. Precise and consistent milking and massage phases are guaranteed with the new L02 Pulsator from Interpuls.

Straight Silencer with 8" NPT. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately. Fits assemblies with 50 to 60 HP pump.

Rust-inhibiting and will not form sludge. Non-foaming Vacuum Pump Oil flows freely even at low temperatures. Gallon weighs 8 lbs.

It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays flexible over time and in all types of climate conditions. CARTON OF 100 FEET - Transflow Vacuum Tubing significantly outperforms rubber.

Compact and ergonomically rounded for easy handling, the 70/30 ratio, 2-exit L02 is simple to install and service takes just a few minutes. Precise and consistent milking and massage phases are guaranteed with the new L02 Pulsator from Interpuls.

Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts Perfectly matched timing gears Reliable splash lubrication Dependable sealing Quality German design and manufacturing 24-Month Warranty against...

Replacement Filter Cartridge for Fresh Air.

Perfectly hygienic with a longer life span than other types of milk tubing when used properly, silicone tubing is as strong as plastic, more flexible than rubber, and can withstand -20° temperatures and boiling wash water.

Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the...

Part number "348-11" on schematic diagram.

Vacuum Gauge has stainless steel case and is glycerine-filled to cushion against vibration. Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance, kit installs on Omega Vacuum Pumps or any pump with 1/4” opening.