Vacuum Regulation Monitoring Milking Equipment For Sale In Houston

Overall dimensions 6" in diameter and 11-1/4" high. Featuring ABS housings and top dome and main filter, the Mark II may be adjusted between 10" and 15". The MKII Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed...

Part number "353-06" on schematic diagram.

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise...

DOS and Windows software is included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

Complete Digimet 3000 features a dual scale for inches Mercury (Hg) or kPa and includes readout unit with preloaded computer programs, cables, printer, battery pack, miscellaneous fittings, and carrying case--everything needed to print out data in the...

Overall dimensions 7" in diameter and 12.5" high. May be adjusted between 10" and 15". The Model 500 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 500 CFM ASME and features direct sensing that is sensitive to...

4” x 4” x 2” unit prints characters and graphics on a strip of paper. Includes cables, paper roll, and AC transformer.

Gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Glycerine fill assures accuracy by providing a cushion against vibration. Dial is 3-7/8" in. Dual scale, Hg and KPA.

Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) . Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations.

Relief Valve safeguards the system against high vacuum incidents. For Sentinel models MKII and M100.

Safety Valve for Stabilvac Seperate styles.

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

There is about 4 CFM needed per cow. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation and many other factors.

Straight Brass Stall Cock; 3/8" thread.

For systems with CFM's over 250, two are recommended. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. Part number "348-17" on schematic diagram.

Stabilvac Vacuum Relief Valve works over a range of 36 to 50 kPa (11" to 15" Hg) and has a capacity of 1400 liter/min. At 50 kPa (49 cfm at 15" Hg.)

Vacuum Gauge has stainless steel case and is glycerine-filled to cushion against vibration. Kit includes Gauge, pipe nipple, elbow, coupling and instructions. Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance,...

Kaeser Pump Oil is a special synthetic oil especially recommended for Kaeser pumps. It requires changing much less often than ordinary petroleum-based oils.

Twin 9/32" ID & 1/8" Wall, 25 lbs. Perfectly hygienic with a longer life span than other types of milk tubing when used properly, silicone tubing is as strong as plastic, more flexible than rubber, and can withstand -20° temperatures and boiling wash...

L80 Interpuls 4-Exit Pulsator for Surge Suspended Buckets with 60:40 ratio now features long-life diaphragm material and smooth synthetic valve plate. Reliable, easily rebuilt, with few moving parts and no fluid, L80 is an economical choice for bucket,...

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

9/32" ID, 17/32" OD, 10 lbs. It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays flexible over time and in all types of climate conditions. Transflow Vacuum Tubing significantly outperforms rubber.

7/16" ID, 11/16" OD, 14 lbs. It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays flexible over time and in all types of climate conditions. Transflow Vacuum Tubing significantly outperforms rubber.

Twin 9/32" ID & 1/8" Wall, 25 lbs. Perfectly hygienic with a longer life span than other types of milk tubing when used properly, silicone tubing is as strong as plastic, more flexible than rubber, and can withstand -20° temperatures and boiling wash...

L80 Interpuls Pulsator with 50:50 ratio now features long-life diaphragm material and smooth synthetic valve plate. Reliable, easily rebuilt, with few moving parts and no fluid, L80 is an economical choice for bucket, parlor or pipeline milking.

Part number "348-33" on schematic diagram. Fits Sentinel 100, 350, 500 Vacuum controllers.