Vacuum Regulation Monitoring Milking Equipment For Sale In Denver

Part number "348-33" on schematic diagram. Fits Sentinel 100, 350, 500 Vacuum controllers.

DOS and Windows software is included to allow numerical and waveform data to be named, saved and then uploaded to your computer for filing, insertion into other programs, or printing.

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

Replacement Foam Filter for 173-02010 Vacuum Regulator. Two filters required.

Part number "348-35" on schematic diagram.

The Digimet 3000 is a 5-key, hand-held, battery operated, microprocessor-based meter which reads a variety of vacuum and pulsation characteristics in the milking system. FeaturingA a serial port and a variety of additional internal features, the Digimet...

4” x 4” x 2” unit prints characters and graphics on a strip of paper. Includes cables, paper roll, and AC transformer.

Replacement foam filter sold separately. Tests show that the Peacekeeper can cut 10 to 15 decibels off existing noise level. The Peacekeeper for the Mark II vacuum controller is a combination noise suppressor and air filter providing a large washable...

Part number "348-17" on schematic diagram. For systems with CFM's over 250, two are recommended. Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum.

Safety Valve for Stabilvac Seperate styles.

Overall dimensions 7" in diameter and 12.5" high. 3" Female NPT mounting connections. The Model 350 Sentinel Vacuum Controller is appropriate for installations where airflow does not exceed 350 CFM ASME and features direct sensing that is sensitive to...

Repair Kit for Fullwood/BouMatic (blue) Vacuum Regulator contains gaskets, O-rings and filters.

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate,...

Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum. In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level.

Relief Valve safeguards the system against high vacuum incidents. For Sentinel models MKII and M100.

Vacuum Gauge has stainless steel case and is glycerine-filled to cushion against vibration. Factory-calibrated for accuracy with a dual Hg/KPA scale which is easily read from a distance, kit installs on Omega Vacuum Pumps or any pump with 1/4” opening.

Fits assemblies with 30 or 40 HP pump. Straight Silencer with 6" NPT. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately.

Glycerine fill assures accuracy by providing a cushion against vibration. Dial is 2-5/8" in., and gauge is threaded for 1/4" NPT back mount with a stainless steel cover. Dual scale, Hg and KPA.

There is about 4 CFM needed per cow. At sea level at a temperature of 68F, with a 1.5HP motor, the RPM of this model is 1400 and the CFM is 12. CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve.

Fits assemblies with 5 HP pump. Straight Silencer with 2" NPT. Extra quiet, glass-packed silencers, included with Kaeser Vacum Pump Assemblies, also may be ordered separately.

Twin 1/4" ID & 1/8" Wall, 25 lbs. Stays transparent and resilient longer than plastic tubing. Silicone Twin Vacuum Tubing is absolutely sanitary and, due to tightly bonded non-reactive pure resins, unaffected by milk fat or bacteria.

Glycerine fill assures accuracy by providing a cushion against vibration. Dial is 2-5/8" in diameter, and gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover.

Glycerine fill assures accuracy by providing a cushion against vibration. Dial is 3-7/8" in. Gauge is threaded for 1/4” NPT bottom mount and has a stainless steel cover. Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring...

1/4" ID, 1/2" OD, 18 lbs. Features two tandem tubes with a smooth, non-porous inner wall for easy cleaning and dependable air flow. Transflow Twin Vacuum Tubing significantly outperforms rubber.

The L02 is adjustable from 50 to 180 ppm over a vacuum range of 35 to 50 kPa (10 to 15 hg), and the rate adjusting screw is positioned for easy access without damage to the pulsator body.

Part number "348-28" on schematic diagram.