Vacuum Regulation Monitoring Milking Equipment For Sale In Charlotte

Two filters required. Replacement Foam Filter for 173-02010 Vacuum Regulator.

Relief Valve for Sentinel Controllers models M350 and M500 protects against occurrences of high vacuum. Part number "348-17" on schematic diagram. For systems with CFM's over 250, two are recommended.

The Peacekeeper for the M350 and M500 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

Large Carrying Case can hold the Digimet Unit, the printer, battery pack, cables, instruction manual and accessories.

The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability. The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes.

Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Dial is 2-5/8" in., and gauge is threaded for 1/4" NPT back mount with a stainless steel cover.

Featuring a serial port and a variety of additional internal features, the Digimet 3000 displays average, maximum, and minimum vacuum level, fluctuation level, pulsator ratio, pulses per minute, milk/rest ratio.

Fits Sentinel 100, 350, 500 Vacuum controllers. Part number "348-33" on schematic diagram.

Vacuum gauges assure accurate readings of line vacuum and provide constant monitoring for maximum herd protection. Large 5" diameter dial is easy to read at a distance, and gauge has stainless steel cover and is threaded for 1/4” NPT bottom mount.

The Peacekeeper for the model M100 vacuum controller is a combination noise suppressor and air filter providing a large washable filter and effective reduction of the noise created by air flow into the controller.

The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability. The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes.

Part number "348-36" on schematic diagram.

Fine quality--economically priced Nickel-Plated brass stall cocks have a large diameter passage, positive on/off and NPT thread.

When supporting a vacuum level of 13.5", it spins at 3574 RPM at 79% speed, moves 317 CFM and has a noise level of 90 dB. Machined one-piece rotor assemblies High strength housing with cast iron endplates Heavy duty bearings & shafts Perfectly matched...

It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays flexible over time and in all types of climate conditions. 7/16" ID, 11/16" OD, 14 lbs. Transflow Vacuum Tubing significantly outperforms rubber.

It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays flexible over time and in all types of climate conditions. 9/32" ID, 17/32" OD, 20 lbs. Transflow Twin Vacuum Tubing significantly outperforms rubber.

The L02 is also available in 4-exit styles and several different pulsation ratios. Precise and consistent milking and massage phases are guaranteed with the new L02 Pulsator from Interpuls.

It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays flexible over time and in all types of climate conditions. 7/16" ID, 11/16" OD, 14 lbs. Transflow Vacuum Tubing significantly outperforms rubber.

Angle Brass Stall Cock; 3/8" thread.

It is lightweight, resistant to flaking, cracking and aging from oxidation, and stays flexible over time and in all types of climate conditions. 1/2" ID, 3/4" OD, 15 lbs. Transflow Vacuum Tubing significantly outperforms rubber.

In the unlikely event of regulator malfunction, the safety valve assures a safe vacuum level. Stabilvac Safety Valve is designed to work exclusively with the Stabilvac to provide safe milking vacuum.

Please call to take advantage of our Computer-Assisted Pump Sizing Program, which considers tall the variables and recommends the right size pump for the job. The Kaeser OMEGA22P is a 7.5HP vacuum pump that weighs 84 lbs.

Servo-style Vacuum Regulator is ideal for pipelines or portable milking operations. Regulator has two washable replaceable filters. Accurate, quiet and easy to install, this Regulator reads vacuum levels up to 3000 LPM (105 CFM) .

Pre-Air Filters for Double or Single Vacuum Line include automatic drain valve assembly, gasketed removable lid, stainless steel screen, and washable filter with baffle. Double-wall corrugated box with expanded polystyrene corner pads.

CTA Pumps come complete with Silencer, Oiler, Pulley and zinc terminal valve. Pump performance, or CFM , varies according to ambient temperature, humidity, air pressure, elevation and many other factors.

Part number "348-11" on schematic diagram.

Siamese style refers to two different tubing sizes conjoined, 1/4" ID and 9/16" ID. Per 50 ft.24 lbs. Siamese Black Rubber Tubing has good flexibility and resistance to kinking, tears and splits.